How to connect aux switches to the dash?
How to connect aux switches to the dash?
The switch had power for the dash lighting as well as power to the switched portion as well. Easy as can be. I even, caveman-like, etched what a strobe into the black painted information area of the switch so it lights up. Lots of switches… Can you control every marker light individually from the dash? Nice lookin dash! Click to expand…
Why do I need to hook up aux switches?
Sounds to me like if those switches are hooked to nothing then the wires you have going to them are for the lights that are in the switch when you turn on your dash lights. It possible that the switches could already have power and they just need the output plugged in. If your around sometime I can take a look at it for you.
Where are the auxiliary switches on a ram truck?
Ram 2500/3500 vehicles have 5 auxiliary switches. These switches are integrated into the vehicles electrical architecture (LIN signals) with their outputs found underhood in connectors located on the auxiliary PDC. Please note that these switches are hard wired to only switch power (12V) via their relays.
How many amps are in an aux switch?
Near the output wires, you should see a white tag that identifies the aux output wire colors with the aux switch number. You should be able to located the fuses for the auxiliary switches in the fuse panel to identify the max current for each switch. I believe AUX 1-2 are 30 Amps, and AUX 3-4 are 10 Amps.
How do you connect the upfitter switch to the dash?
Connect the upfitter switch wiring connector to the back of the upfitter switch. It is indexed and will only go in one way. Take the upfitter switch and connected wire and press the assembly into the dash opening on the far left side until the switch snaps in.
Ram 2500/3500 vehicles have 5 auxiliary switches. These switches are integrated into the vehicles electrical architecture (LIN signals) with their outputs found underhood in connectors located on the auxiliary PDC. Please note that these switches are hard wired to only switch power (12V) via their relays.
Where are the auxiliary switches on a Ford F-Series?
You should be able to located the fuses for the auxiliary switches in the fuse panel to identify the max current for each switch. I believe AUX 1-2 are 30 Amps, and AUX 3-4 are 10 Amps. If you need more room to work, you can unclip the relay pack and pull it out under the driver steering column right near the parking brake.
