Common questions

Why are the heated seats on my Silverado not working?

Why are the heated seats on my Silverado not working?

Hi I have a 2003 Silverado with the heated seats and while testing them out before it gets cold outside I have noticed that I am having trouble with them turning off by themself. Seems to be a problem with the drivers side mostly, but when the drivers side has a problem it shuts both sides off.

Is the heated seat on my GMC Sierra Denali working?

The driver side heated seat is not working, everything els is working fine and the passenger seat is working fine. If it is a fuse, I cant see of any in the owners manual. Can you help me figure out how to fix th is heated seat. 2004 GMC Sierra Denali Truck. There is no fuse for just the heated seat.

Where are the heated seats on a GM Truck?

There will be DTCs B2435, B2440, B3606 and/or B1825 set in the Drivers Seat Module. The adjustable pedal position sensor, seat recliner position sensor and both heat seat thermistors share the same 5 volt reference internal to the Drivers Seat Module.

What to do if heated seats won’t stay on?

A fault in heated seats, adjustable pedal or seat recliner will affect BOTH heated seats. Note:: Even if the vehicle is not equipped with adjustable pedals DTC B3606 still may set. Recommendation/Instructions: To help isolate the area of concern use the Tech 2 and go to “Sensor Data” in the Drivers Seat Module.

Hi I have a 2003 Silverado with the heated seats and while testing them out before it gets cold outside I have noticed that I am having trouble with them turning off by themself. Seems to be a problem with the drivers side mostly, but when the drivers side has a problem it shuts both sides off.

The driver side heated seat is not working, everything els is working fine and the passenger seat is working fine. If it is a fuse, I cant see of any in the owners manual. Can you help me figure out how to fix th is heated seat. 2004 GMC Sierra Denali Truck. There is no fuse for just the heated seat.

There will be DTCs B2435, B2440, B3606 and/or B1825 set in the Drivers Seat Module. The adjustable pedal position sensor, seat recliner position sensor and both heat seat thermistors share the same 5 volt reference internal to the Drivers Seat Module.

A fault in heated seats, adjustable pedal or seat recliner will affect BOTH heated seats. Note:: Even if the vehicle is not equipped with adjustable pedals DTC B3606 still may set. Recommendation/Instructions: To help isolate the area of concern use the Tech 2 and go to “Sensor Data” in the Drivers Seat Module.

Why does my seat heater not turn on?

Some customers may comment that occasionally the seat heater will not operate when activated. If the ignition key is cycled OFF and back ON again, the heated seat will operate correctly. Also, on some LB7 diesel engine vehicles, the seat heater may turn itself off during the first 10 minutes of operation.

How can I reprogram the seat control in a 2003 suburban?

How can i reprogram the seat control in a 2003 suburban module myself? Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them.

Why are the heated seats on my Chevy Silverado not working?

For example, if the driver and passenger both attempt to turn on their heated seats, one of the seats may fail to work. In this case, the culprit may very well be the heating element.

How long do heated seats stay on in a car?

Driver and passenger heated seats inoperative or shut off in 30 seconds. There will be DTCs B2435, B2440, B3606 and/or B1825 set in the Drivers Seat Module. The adjustable pedal position sensor, seat recliner position sensor and both heat seat thermistors share the same 5 volt reference internal to the Drivers Seat Module.

What to do when your heated seat goes bad?

If that works OK and stays on for a minute or more well then the problem is with the bottom pad, on the other hand if it shuts off on “back heat only” then it’s the back pad that you have to replace. If both sides are bad try moving the seats using the power seat controls.

Driver and passenger heated seats inoperative or shut off in 30 seconds. There will be DTCs B2435, B2440, B3606 and/or B1825 set in the Drivers Seat Module. The adjustable pedal position sensor, seat recliner position sensor and both heat seat thermistors share the same 5 volt reference internal to the Drivers Seat Module.

Some customers may comment that occasionally the seat heater will not operate when activated. If the ignition key is cycled OFF and back ON again, the heated seat will operate correctly. Also, on some LB7 diesel engine vehicles, the seat heater may turn itself off during the first 10 minutes of operation.

How does the seat back heater work on a car?

Pressing the seat cushion button 1 time will activate the seat back and cushion heater elements in the high mode. Each time the seat cushion button is pressed the seat back and cushion heat level is reduced from high to medium, low, and off.

Can you test a heated seat at home?

Because the heated seats are a class 2 electronic device and because of the thermistor and all of the modules involved in their operation, there is not much that you can test at home with a test light or a volt meter. The way to test them is with the class 2 scan tool similar to what the dealers use.

What are the heated seats on a 2005 Chevy Silverado?

Heated seat problem on my 2005 Chevrolet Silverado. Driver seat module, driver door module, driver heat switch, driver whole seat swapped with a known good seat, body harness that goes to both driver and passenger seat, passenger bottom cushion and back heater element

Why does my Chevy Silverado seat not turn on?

The problem can be anything from a blown fuse to a short in a wire, or faulty relay. In some cases, the entire heating element is burned out and needs to be replaced, which is a potentially costly repair. If the seat turns on by itself, the problem may be a short in the heating element within the seat.

If that works OK and stays on for a minute or more well then the problem is with the bottom pad, on the other hand if it shuts off on “back heat only” then it’s the back pad that you have to replace. If both sides are bad try moving the seats using the power seat controls.

Is there a fault in the heated seats?

A fault in heated seats, adjustable pedal or seat recliner will affect BOTH heated seats. Note:: Even if the vehicle is not equipped with adjustable pedals DTC B3606 still may set.

Is there a heated seat switch on a Chevy Silverado?

2005 Chevrolet Silverado. Replaced actual heated seat switch. my truck came with heated seats and the driver seat turns on by itself u turn it off and then it comes right back on and it will turn itself off as well it just keeps cycling on and off but the back portion only. This could any number of things.

Why does my GMC Sierra heated seat go off?

A bad heated seat switch, faulty, drivers seat module, a shorted wire under the seat, etc. You would need to use a scanner to view input data from the seat switch to the module,and schematic to trace down the cause. Hi, I have an 03 GMC Sierra with the 5.3.

Why does my seat back heater not work?

The most common failure is either the seat cushion heater element or seat back heating element has an open circuit. Basically a spot on the element burns open. If either one has done that, neither on that seat will function. An OHM meter and some testing would need to be done to figure that out. There is another possibility that is not very common.

Is there a fuse for the heated seat?

There is no fuse for just the heated seat. The heated seat is controlled by the memory seat module on this truck, and the drivers door module. The most common failure is either the seat cushion heater element or seat back heating element has an open circuit. Basically a spot on the element burns open.

What does it mean when heated seats Don’t Turn on?

In the heated seats don’t turn on scenario, the driver can push the heated seats button and the heaters will not come on. But if the driver turns the key to OFF and then back to ON, they will work. Other times, the heated seats will turn on normally.

What is the problem with intermittent heated seats?

So the problem is intermittent heated seats that may include trouble code B3941. The B3941 front seat heaters circuit trouble code sets with the driver’s door module (DDM) or passenger door module (PDM) detects that the voltage to the seat heater element is shorted to ground.

Are there heated seats on a 2004 GMC?

2004 GMC: heated seats The driver’s side heat keeps shutting off Hello and welcome to Just answer.com, Super mechanic here. About your vehicle. There has been a service bulletin for that type of concern. It involves a reprogramming of the driver seat module. The dealership (stealership) would have to do that, I hate to say.

How does the seat heater on a GM SUV work?

Power is supplied to the seat heater elements by the door modules. Ground for the heater elements is pulse width modulated so the module can vary the on/off time of the circuit and thereby adjust the heat.

In the heated seats don’t turn on scenario, the driver can push the heated seats button and the heaters will not come on. But if the driver turns the key to OFF and then back to ON, they will work. Other times, the heated seats will turn on normally.

Why does my driver’s side seat not stay on?

The weird thing is the seat kept turning off while driving to work but as soon as I parked the car and pulled out my phone to take a video of what was happening the seat stayed on for a good 20-30 seconds and I gave up. I have done some research this morning and have seen instances of this happening on ’11s, ’12s, and ’13s…

So the problem is intermittent heated seats that may include trouble code B3941. The B3941 front seat heaters circuit trouble code sets with the driver’s door module (DDM) or passenger door module (PDM) detects that the voltage to the seat heater element is shorted to ground.

Author Image
Ruth Doyle