What does code 16 mean on passenger side air bag?

Code 16 one flash followed by Six flash cycle: Passenger side air bag trouble code. Often means that in a car without a passenger side airbag the resistor that sits in its place has failed but could be any of the following. You’ll need to extract the airbag fault codes to know. DTC B1996: Passenger side air bag short to battery.

What is the LFC code for a Ford airbag?

LFC code 1-6 , DTC B-2290 is for occupant classification system fault Dont even try to diagnose what the problem is. You have a warranty on the vehicle just take it back to the dealer. This ia fault with passenger sida seat belt pretensioner, wiring terminals or connectors, ocs system component or rcm module.

What happens to your airbag control module in an accident?

Send your airbag control module to MyAirbags and save time, money and not having to deal with a dealership! During an accident, seat belt retractors and tensioners are deployed and will lock up by their gas charges, similarly to how airbags are deployed in a collision.

What is the DTC code for a airbag module?

Third Row Left Roof Rail Deployment Loop Resistance Above Threshold Third Row Left Roof Rail Deployment Loop Resistance Below Threshold Left-hand Side Impact Airbag Module Deployment Circuit -Short To Ground or Earth Or Voltage (12 volt VSS) Left-hand Side Impact Airbag Module Deployment Circuit -Short To Ground or Earth Or Voltage (12 volt VSS)

Do you clear trouble codes before resetting airbag light?

Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can cause the problem and therefore continue the diagnosis. You should never just reset the airbag light without repairing the problem.

Where is the airbag code on a 1996 Chevy?

If you use a generic OBD-II scanner, it will show no fault codes, even though airbag codes are present and the airbag light is on. Under your Chevrolet dashboard, you will find the Onboard Diagnostic port, also known as the OBD-II port. Your browser does not support the video tag. All 1996 and newer Chevrolet have this port.

What does a soft code airbag light do?

a soft code will turn the airbag light on for one drive cycle, or less. the next time u start it, it’ll go away (or say you forget to plug in a plug and plug it in like 5 minutes later) . a hard code means the airbag light will never go off, and won’t self test at startup (aka blink 5 times and disappear).

What happens if there is a problem with the airbags?

When there is a problem with the system, it will not deploy the airbags at all in an accident. It is always recommended to repair the problem as soon as possible. If your airbags are not functional in a crash, it may cause death or serious injuries.

Where are airbag codes stored in a Honda?

Below you will find common airbag codes that can be stored in your airbag control module after your vehicle was in an accident. The best part of having your Honda’s original airbag module reset by MyAirbags is that when you get your airbag control module back and it goes back into the same vehicle that it came out of then it will be plug-n-play.

How to know if an air bag is short?

You’ll need to extract the airbag fault codes to know. DTC B1996: Passenger side air bag short to battery. Lamp flash code: 6 flashes.  DTC B1997: Passenger side air bag short to ground. Lamp flash code: 6 flashes.  DTC B1998: Passenger side air bag open circuit. Lamp flash code: 6 flashes.

What does the code on the air bag indicator mean?

If the system detects any problems, it gives you a signal through the airbag indicator by flashing the light several times, giving you the specific problem the test has detected. These flashes are codes, each having its own meaning. The supplemental restraint system (SRS) warning light is most commonly known as the airbag system light.

Is the passenger airbag on my EX35 a problem?

Hello, the passenger airbag on my ex35 has been a problem for a few years. A local dealership told me a few years it was linked to wires under the seat becoming loose, and fixed it. The problem has reoccurred off/on for the following 3yrs.

Do you need scanner to read airbag trouble codes?

Working with your airbag system is crucial, and therefore, always read the trouble codes with an OBD2 scanner to get an idea of where to start your troubleshooting. Do never clear the trouble codes before you fix the problem caused by the airbag light.

What does code 16 mean on passenger side air bag?