What causes a p1400 code?
What causes a p1400 code?
Some of the most common causes are: Defective air intake system. Defective or dirty air filter element. Vacuum leak.
What does a p1400 Ford engine code mean?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost to diagnose the P1400 FORD code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.
What is the dpfe sensor on Ford p1400?
The system employs an EGR Valve, an Electronic Vacuum Regulator (EVR), and a Delta Pressure Feedback EGR sensor (DPFE). The DPFE Sensor measures EGR flow across an orifice located inside the special EGR Tube.
How much does it cost to repair a Ford p1400?
The cost of diagnosing the P1400 FORD code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
What does the EGR system on a Ford p1400 do?
P1400 FORD Description The purpose of the Exhaust Gas Recirculation (EGR) system on your engine is to limit oxides of nitrogen (NOx) emissions. This is done by redirecting small amounts of exhaust gas back through the upper intake to get mixed in with the air/fuel charge.
What does diagnostic code p1400 mean?
A code of p1400 means that there is an EGR fault in the egr system.These systems are basic and contain most of the same parts.These parts are as follows An EGR valve,Egr valve gasket and an ,Egr valve to manifold tube.I would take a look at the gaskets for the manifold tubes and the EGR valve.I cant tell you where its at without knowing the year ,model,and engine size.But with the information given thats the best I can do for you but this gives you some idea as to where to start.
What is the repair for code P1401 in a Ford?
The recommended repair for a P1401 code is to replace the DPFE sensor with a new one. Ford offers an upgraded DPFE sensor for most models (part number 4U7Z-9J460-AA) that is reportedly higher quality than the factory sensor it replaces. If replacing the DPFE sensor does not clear the P1401 code, the problem may be in the EGR valve itself.
What does p1400 code on a trailblazer mean?
P1400 codes are designated for the Trailblazer’s exhaust system and related components. Problems with the intake manifold, a vacuum leak in the exhaust and proper gas recirculation can produce these codes. P1500 Codes The Trailblazer has many ancillary systems outside the engine compartment requiring occasional maintenance.
What is the p1409 code?
Error Code P1409 is defined as EGR Vacuum Regulator Solenoid Circuit Malfunction. This error code refers to a test to check the electrical function of the EGRVR (Exhaust Gas Recirculation Vacuum Regulator) solenoid.
