How do you change the brake piston on a car?

How do you change the brake piston on a car?

Now you want to take the brake piston tool you bought or own and screw the piston back in all the way. Loosen the bleeder screw with the 10mm Wrench and turn the piston in all the way. The first couple of turns are probably gonna be tight, but after that it’s easy.

Can a caliper not release cause brake drag?

Just like with the master cylinder not releasing causing the brake drag, a caliper not releasing and staying applied can do the same thing. If only one position is dragging, this could be the case.

Why is my brake proportioning valve stuck in one position?

If your brake system has not been previously worked on or suffered no brake leaks from the wheel cylinders, calipers or master cylinder, chances are the brake proportioning valve is stuck in one position, tripping the brake dash light.

What causes brake drag when replacing master cylinder?

This situation is usually remedied by replacing the master cylinder. We see a lot of brake drag problems caused by a master cylinder that is too full of fluid. If the system is overfull, there may not be enough room in the reservoirs for the fluid to return.

Is there laser piston reset tool for Kia i30?

Telford, Shropshire, England. Well it seems the Laser piston reset tool will do the job on the Picanto & i30 on the basis that it was sold as suitable to me by a KIA dealer who stock them & sell them for around £22 as opposed to £80 for the genuine KIA item which does the Picanto & C’eed. Hope this helps others.

Can you use a G clamp on a Kia i30?

And the guys at the local KIA garage said the i30 / C’eed have the same arrangement as the Picanto just on a bigger scale. The old G clamp works fine if the rear brakes don’t incorporate a handbrake mechanism. Many small cars with disc brake rears incorporate the handbrake mechanism in the caliper and have various methods of retracting the piston.

Do you need wind back tool for Kia i30?

Yes, ta Surferdude, I knew I’d need a wind-back or re-set tool I just didnt know which one to buy, as none of the examples I viewed on ‘tinterweb actually stated KIA / Hyundai use. The reason the rears have to be wound back for pad replacement is down to the handbrake mechanism basically.

Which is rear disc brake wind back Tool Works?

Hi guys n gals… quick question, which rear disc brake wind-back tool works on an i30 & might any such item also work on the Picanto rear disc brake set-up? Cheers… Keith Telford, Shropshire, England.