Why does my EZGO golf cart go forward but not in reverse?

Why does my EZGO golf cart go forward but not in reverse?

There are exceptions to this rule but for the most part you have one of two problems with your EZGO. First check your PDS Forward and Reverse switch for any loose connections. If all the connections are good try swamping the top and bottom wires on the back of the F/R switch.

Why does my PDS golf cart go backwards?

First check your PDS Forward and Reverse switch for any loose connections. If all the connections are good try swamping the top and bottom wires on the back of the F/R switch. If the problem reverses it’s self (You can now go backwards but not forwards) then you have a bad F/W switch.

What to do when your golf cart goes backwards?

If all the connections are good try swamping the top and bottom wires on the back of the F/R switch. If the problem reverses it’s self (You can now go backwards but not forwards) then you have a bad F/W switch. Just buy a new one from here ( Forward and Reverse Switch) and install it in place of the old switch.

Why does my Husqvarna go backwards but not forward?

This one goes fine backwards but not in forwards. Rich, it sounds like the forward valve is bypassing. This could be due to an internal leak at the selector valve,a bad seal/gasket, or a stuck relief valve . That’s sort of what I was thinking, that it was bypassing somewhere internally.

When does a car slip but only in reverse?

Here is a brief summary. 1. It slips but only in reverse. In forward it will climb a steep mountain. 2. It only slips when under a load. For example, it won’t back up a hill. It will not back up over a street curb. The motor revs but the car does not move. But, on flat pavement or with a slight uphill grade, it backs fine. 3.

Why is it having trouble moving in reverse?

So when forward and reverse are selected at the same time the transmission binds and the car ends up going nowhere fast. The more revs you give it the worse it gets. They replaced the main shaft and now the problem is gone. Read more at http://www.honda-tech.com/showthread.php…

Why does my car go forward and reverse at the same time?

The crack would open up when the trans oil was hot (and thinner), so when reverse was selected, it would also engage the forward drive gear at the same time (^ due to pressure bleed). So when forward and reverse are selected at the same time the transmission binds and the car ends up going nowhere fast. The more revs you give it the worse it gets.

What happens when you put a truck in reverse?

Got back in, put back in reverse, it wouldn’t move. It was as if the truck was in neutral. The reverse band had snapped. Happend in June, I drove it with only forward, no issues till November, saved up the money, paid $1800 to have it rebuilt.