What is the front axle label on a Ford Ranger?

What is the front axle label on a Ford Ranger?

The front differential housing will have a label on the bottom of it: The label is similar to the one found on the Dana 35 TTB Axle beams of the 1990-1997 Ford Ranger: The sticker will list the gear ratio across the top (second from the right).

Where are the hubs on a Ford Ranger?

The 1998-2000 model had PVH hubs (Pulse Vacuum Hubs), but from 2001-2011, it was a live axle setup. The front axle shafts from 2001-2011 are permanently locked to the front differential.

What kind of front axle does a Ford Explorer use?

The 1995-2001 Ford Explorer 4×4 also used the Dana 35 SLA front axle. The 1998-2011 Ford Ranger Dana 35 is offset on the drivers side and uses an intermediate shaft similar to the Dana 35 used in previous years, but is not attached to the axle beam as in previous years. Instead, the Dana 35 is fixed in place between the frame rails with (3) bolts.

What is the gear ratio on a Ford Ranger?

The label is similar to the one found on the Dana 35 TTB Axle beams of the 1990-1997 Ford Ranger: The sticker will list the gear ratio across the top (second from the right). If you look closely, you can see that this sticker indicates a 3.55 gear ratio (this sticker is from an Explorer Dana 35). Below the yellow section, you will see ‘F87A’.

Where are the axles on a Ford Ranger?

Are the Dana 35 “hybrid” axles with the Dana 28 guts. This number can be found at the top-left of the label located on the backside of the passenger side axle beam. For SLA axles, it will be on the passenger side axle tube.

What kind of axle beam does a 1993 Ford Ranger have?

The 1993-1997 Rangers can be deceiving. Some owners believe they automatically have a Dana 35 because they have a 1990 or newer Ford Ranger. Although their 1993-1997 4-cylinder Ranger may look like it has a Dana 35, it may really be a Dana 35 axle beam using a special housing, and Dana 28 components.

When did Ford start using 4×4 front axles?

In 1990, Ford Introduced a 4.0L V6 to its engine lineup, and along came the larger Dana 35 axle to handle the increase in power. The Dana 28 didn’t completely go away though. A version of it found its way in to the 1990-1997 Ford Aerostar AWD mini-vans.

What does the code on the front axle mean?

Your front axle may have a code stamped on the left carrier arm between the fill plug and axle end. It will look like ‘ F17A ‘ or similar. What this code represents is;