What are fuel rail spacers?
What are fuel rail spacers?
Fuel rail mount spacers are used to raise the fuel rail for installing longer injectors and/or rail clearance issues. These spacers will require the installer to install longer rail mounting screws (not included with our spacers) and may require injector spacers.
What do fuel injector spacers do?
This spacer set allows you to adapt short LS Truck fuel injectors into a taller LS1/LS6 intake manifold and fuel rail. Commonly used when swapping an LS1 or LS6 intake on an LS Truck engine.
What do injector spacers do?
Adapts Short Ls Truck Fuel Injectors Into A Taller Ls1 Intake Manifold And Fuel Rail. Spacer adds approximately 17.3mm (. 68″) of length to the fuel injector.
How to remove fuel injector from fuel rail?
Remove the plastic cover from the fuel rail. Using a small flat tip screwdriver or probe, disengage the wire clips on the fuel injector electrical connectors plugs and disconnect the plugs. Move the fuel injector wiring harness out of the way. Using the 10 mm socket, remove the fuel rail retaining bolts (4). NOTE
Where are the retaining bolts on a fuel injector?
Move the fuel injector wiring harness out of the way. Using the 10 mm socket, remove the fuel rail retaining bolts (4). The two bolts closest to the intake manifold are difficult to see because they are located below the fuel damper and fuel pressure regulator.
What to do if your common rail injector is cracked?
If you have a cracked nozzle, you must buy a new injector since it will be cracked as well. 30: Replace copper nozzle washers, with new washers. 31: Reinstall injectors into injector bores, and make sure they click into place, also make sure the injector supply hole is oriented towards the connector tube.
Which is the best fuel rail pressure sensor?
GM Original Equipment™ Fuel Injection Fuel Rail Pressure Sensor by ACDelco®. Bring your vehicle’s fuel system back to its top shape with this top-notch part. Designed as a direct-fit replacement of your worn-out or malfunctioning… Remanufactured Throttle Body Injector by GB Remanufacturing®.
