Where is the drain plug on a Softail?
Where is the drain plug on a Softail?
On Softails, the drain plug is found between the rear shocks; Dyna and Touring models have drain plugs under the left side of the engine’s oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained. Tighten the drain plug to 18 foot-pounds with a torque wrench.
Where are the freeze plugs on an engine block?
If you look on the side of an engine block you will see a line of circular depressions about an inch and a half in diameter and about a quarter of an inch deep. These are actually holes in the side of the engine block which are plugged with a dish shaped metal plug called a “freeze plug” or “expansion plug”. WHAT FREEZE PLUGS DO.
How to replace freeze plug on GM 4.3 V6 engine?
Next, place a wide screwdriver blade against the edge of the freeze plug, and hit the screwdriver with a hammer. The freeze plug should twist, and you can grab it and pull it out with pliers. The freeze plug in this video was a lot more stubborn, but I was able to get it out. Loading…
Where is the drain plug on a Harley Davidson Dyna?
Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained. Tighten the drain plug to 18 foot-pounds with a torque wrench.
Where is the oil drain plug on a Softail?
On Softail models the engine oil drain plug is under the right side of the motorcycle’s frame, near the rear wheel. Dyna and Touring models have their oil drain plugs under the transmission housing.
If you look on the side of an engine block you will see a line of circular depressions about an inch and a half in diameter and about a quarter of an inch deep. These are actually holes in the side of the engine block which are plugged with a dish shaped metal plug called a “freeze plug” or “expansion plug”. WHAT FREEZE PLUGS DO.
What’s the drain plug on a Harley Davidson?
Tighten the drain plug to 18 foot-pounds with a torque wrench. Unscrew the filler plug from the left side of the transmission, using a 3/8-inch Allen wrench.
Where is the transmission drain plug on a Dyna?
Unscrew the transmission housing’s drain plug, using a 5/8-inch socket. On Softails, the drain plug is found between the rear shocks; Dyna and Touring models have drain plugs under the left side of the engine’s oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained.
