What do Upfitter switches do?
What do Upfitter switches do?
Upfitter Switches The switches are directly connected to the fuse box and allow owners to seamlessly hook up their winches, lights, strobes, radios, or any other device they deem necessary.
What does it mean to Upfit a truck?
An upfit is a set of vehicle accessories or augmentations for an existing vehicle that are customized to the worker’s needs. Upfits can include shelving, roof units, cooling units, hangars, and more.
Where are the Upfitter switches located on a Ford?
Description: The Ford Upfitter Switches are optional overhead console mount switches (Option Code 66S) that control under hood mounted relays. These relays power six blunt cut wires that are taped on a harness near the upfitter auxiliary relay box that can be found on the driver’s side of the engine compartment.
What kind of upfitter switch do I Need?
Mine was a little more complicated, but if you have a pair of 35W or 55W lights this will cover you, use one of the 30amp switches, your owners manual will tell you wich color it is. RUFFSTUFF you are the man, I found this before I did mine and could not find it for this thread.
Where is the blunt cut on the upfitter switch?
Figure 2: Upfitter Relay Box and upfitter switch blunt cut output location. On vehicles with dual batteries, removing the upfitter relay box will provide additional access to the blunt cut wires. 1. Disconnect the electrical connector. 2. Release tabs and lift upwards to remove.
How to change upfitter fuse on Ford Super Duty?
2017 And Newer Ford Super Duty AUX Upfitter Switches 1 Remove upfitter relay box cover. 2 Remove 5 Amp fuse located on the lower right hand corner of the upfitter relay box. 3 Slide the contact guard from position A (left) to position C (right) position. 4 Re-insert 5 Amp fuse into position C (right) position. 5 Replace relay box cover.
Can a dealer install the Upfitter switches for You?
Unfortunately, neither the factory nor the dealer (generally) install the upfitter switches for you. As a matter of fact, my window sticker says “UPFITTER SWITCHES (5) CUSTOMER RESPONSIBLE FOR INSTALLATION” This means you’ll be installing the switches yourself.
Where are the Upfitter switches on a Ford Super Duty?
The following procedure describes how to configure #5 and #6 upfitter switches to Battery hot. 1. Remove upfitter relay box cover. 2. Remove 5 Amp fuse located on the lower right hand corner of the upfitter relay box. 3. Slide the contact guard from position A (left) to position C (right) position.
What are the Upfitter switches on a GMC Sierra?
They’re going in a 2020 GMC Sierra AT4. If you’re not familiar with the Upfitter Switches, they’re a bank of 5 switches for controlling whatever you want to add (snowplow stuff, external lights, compressors, etc). They are/were orderable from the factory, in fact my truck came with them.
Are there Upfitter switches on the Ford Raptor?
When the 2010 Ford Raptor came out, it featured the upfitter switches as well. For some strange reason, Ford never offered it on the F-150. Not even with the FX4 off-road package. This didn’t stop Ford F-150 owners though. Some have found ways to add the upfitter switches to their trucks.
