How do you fix a bump steer suspension?
How do you fix a bump steer suspension?
Measure from the ground to the lower ball joint or other reliable reference point. Write the number down. Remove springs and disconnect the sway bar. Return the suspension to the proper height by using your reference number to the ground. Obtain a supply of bump steer shims.
Can a Superrunner steering kit be used with TTB suspension?
This Superrunner Steering Conversion kit works with Superlift Suspension lift kits associated with Ford applications. Fords with TTB suspension are known for their somewhat vague steering feel. On off-camber or less than ideal driving surfaces, continuous corrective steering input is required to keep the vehicle pointed straight.
How do you adjust the height of a bump steer?
Measure from the ground to the lower ball joint or other reliable reference point. Write the number down. Remove springs and disconnect the sway bar. Return the suspension to the proper height by using your reference number to the ground. Obtain a supply of bump steer shims. Bolt on the bump steer plate to the hub.
Why do I get bump steer in my car?
It is caused by bumps in the road or track interacting with improper length or angle of your suspension or steering linkages. Most car builders design their cars so that the effects of bump steer are minimal. However, you must still take care to bolt on your suspension carefully so as not to create unwanted bump steer.
How can I return my bump steer to the correct height?
Return the suspension to the proper height by using your reference number to the ground. Obtain a supply of bump steer shims. Bolt on the bump steer plate to the hub. Level the plate and note where the dial indicator is on the bump steer plate so that you can quickly return to the correct ride height.
Is there a way to get rid of bump steer?
By moving the mounting point of the tie-rod end (blue line) and adjusting the length, bump steer can be minimized. Although it can’t be eliminated, Bump Steer Kits will help you regain control when you’re pushing your car to its limits.
How to correct bump steer onallcylinders [ video ]?
Set the vehicle at ride height. Use the proper size tires and air pressures. Caster must be set. Camber must be set. Toe-in must be set. Tie rod lengths must be set. Steering should be centered (tie rod ends centered on inner pivot points lower ball joints). Steering must be locked down.
This Superrunner Steering Conversion kit works with Superlift Suspension lift kits associated with Ford applications. Fords with TTB suspension are known for their somewhat vague steering feel. On off-camber or less than ideal driving surfaces, continuous corrective steering input is required to keep the vehicle pointed straight.
