How to adjust front wheel bearings and change out hub grease?
How to adjust front wheel bearings and change out hub grease?
1. Jack up Front Wheel, Remove Wire Wheel (don’t try to remove it with wheel on ground, exercise in frustration and will wreck your lead hammer). 2. Remove 4 nuts with an 11/16 end wrench that hold on the Wire Wheel Hub adapter (part 68). I put a big screwdriver between the caliper and the hub to keep it from turning.
What’s the best way to clean and repack wheel bearings?
The first step here is to remove the wheel from the hub. Use an impact wrench and socket or a star wrench to remove the lug nuts from the wheel. Once that’s done, remove the wheel and place it aside and clearly out of your work area for now. Step 4: Remove the brake caliper from the hub.
How do you install new axle bearing hubs?
While holding the new axle bearing hub, install the mounting bolts by hand to avoid cross threading. Then, tighten evenly in a star pattern to manufacturers specifications (70-85 ft pounds). These bolts can be installed with thread lock for added protection against loosening.
How do you replace a wheel hub on a Porsche?
Re-install the bearing race retainers and the four screws that hold them in place. Install the hub, and let it warm up to room temperature if you placed it in the freezer. Re-install the axle, taking care not to push the hub out of the bearing.
How do you remove wheel hub?
Steps Park your vehicle on a flat surface. Use wheel chocks to secure wheels whose bearings you aren’t replacing. Loosen the lug nuts and lift the wheel using a jack. Unscrew the lug nuts and remove the wheel. Remove the brake caliper. Remove the dust cover, cotter pin, and castle nut. Remove the rotor. Unscrew the hub bolts and remove the old hub.
How do you remove hub assembly?
Tap the inner race out with the hammer. Flip the rotor over onto the blocks and place the drift punch on the lip of the small outer bearing. Tap in out with the hammer. Clean the inside of the hub with carburetor cleaner and a rag, removing all sludge.
Where is the wheel bearing located?
wheel bearings. Bearing location. The bearings are located in the wheel hub on disc-brake wheels, and inside the brake drum, which forms part of the hub, on drum-brake wheels.
