What kind of light bulbs does a 2002 Ford Ranger use?

The 2002 Ford Ranger uses 164-type bulbs for its dash lights. You should replace all the bulbs at the same time. That way you won’t have to replace the bulbs again for a while. Turn off the engine and remove the two bolts under the radio trim using a socket wrench. Remove the three bolts from above the instrument panel using the socket wrench.

Do you need to replace the dash lights on a Ford Ranger?

Replacing the instrument lights on your Ranger requires the removal of the dashboard itself on the driver’s side. The 2002 Ford Ranger uses 164-type bulbs for its dash lights.

What’s the bulb on the ranger station cluster?

The bulbs that light up your gauges and the cluster itself are bulb #194. They are held in with the black sockets. Turn the sockets counter-clockwise to remove. The bulb pulls straight out of the socket.

How do you remove the instrument panel from a Ford Ranger?

Remove the four bolts securing the instrument panel into the Ford Ranger. Disconnect the electrical connector and pull the Ranger’s instrument panel out of the vehicle. Remove the seven screws on the instrument panel using a Phillips screwdriver and pull the instrument panel apart. The underside of the front panel contains the bulbs.

Replacing the instrument lights on your Ranger requires the removal of the dashboard itself on the driver’s side. The 2002 Ford Ranger uses 164-type bulbs for its dash lights.

Can a 2002 Ford Ranger be replaced at the same time?

Replacing the instrument lights on your Ranger requires the removal of the dashboard itself on the driver’s side. The 2002 Ford Ranger uses 164-type bulbs for its dash lights. You should replace all the bulbs at the same time.

How do you take the bulbs out of a Ranger?

Disconnect the electrical connector and pull the Ranger’s instrument panel out of the vehicle. Remove the seven screws on the instrument panel using a Phillips screwdriver and pull the instrument panel apart. The underside of the front panel contains the bulbs.

Why is my Ford Ranger stalling at stoplights?

A dirty throttle body can lead to stalling in your Ranger. If you let off of the gas coming to a stoplight and it stalls for a second or two and recovers itself, it very well could be a dirty throttle body that is causing the problem. Here’s a great YouTube video from EricTheCarGuy. on how to clean a throttle body.

Can you replace the headlamp bulb on a Ford Ranger?

It helps with replacing the headlamp bulbs and interior lighting bulbs on your Ford Ranger. The Ford Ranger headlight replacement bulb guide combines all the information you need for the headlight and other light bulb replacements as well as light bulb sizes.

How do you change the fuel line in a Ford Ranger?

Remove the fuel line hoses. They should unsnap from the top of the tank. Detach the wires from the top of the fuel tank. They are on quick release connectors. Remove the gas inlet hose. This will require loosening a hose clamp. The hose will be on the back of the tank. Unscrew the assembly on top of the fuel tank.

What’s the problem with my Ford Ranger fuel gauge?

The victim is a 1994 Ford Ranger with a 2.3L engine. The issue is that the fuel gauge will register empty and it’s intermittent. Hopefully, the problem will stay until we get some diagnosis done. After watching the video, put up some comments of what you think the problem is and how would you confirm it. Thanks for watching! Loading…

Where is the fuse box located on a Ford Ranger?

If equipped with Rear Anti-Lock Brake System (RABS) Module. Battery Saver Relay, Electronic Shift Relay, Interior Lamp Relay, Power Window Relay, Electronic Shift Control Module, Dome/Map Lamp, GEM, Instrument Cluster The power distribution box is located in the engine compartment near the battery.

Where are the screws in a Ford Ranger?

Note: 2 screws are under hood release handle Step #9 With tilt steering wheel, drop to lowest position. Also pull tranny shifter to “1” position (if automatic).

What kind of light bulbs does a 2002 Ford Ranger use?