What kind of gears does a 4WD F150 have?

This selection of front end gears fit your 2004-2020 4WD F150’s stock 8.8″ Reverse IFS and adjust your truck’s final drive ratio for improved power or to get rid of sloppy shifting and sluggish driving that’s caused by throwing larger wheels and tires.

How can I tell the gears on my F150?

All you need to do is count the number of rotations for the driveshaft to get a rough estimate of your F150’s gear ratio. If you have a 4WD F150 and it comes time to swap out gears, you absolutely must get matching gears for your F150’s front IFS differential.

Where are the cam coils on a Ford F150?

The coils are secured in place by 7mm hold-down bolts. Remove the cam position sensor (CMP) hold-down bolt at the front of each cylinder head and remove the sensors. For best access to the passenger side valve cover, disconnect and remove the powertrain control module (PCM) and mounting bracket from the firewall. Figure 6. Dipstick tube removal.

When to replace cam phaser on Ford F-150?

While the problem may not be as widespread as some believe, phaser wear can show up around the 50,000 mile mark, and if left unchecked, can lead to valve timing issues and potential engine damage. This article will outline the cam phaser replacement procedure on the 3-valve 5.4L Triton engine as equipped in 2004 to 2008 Ford F-150 models.

What are the sensors on a Ford F150?

For the fuel injection, this includes the fuel injectors, throttle position sensor, throttle body, and various other sensors. For the ignition and cam, this includes the cam position sensor, cam timing solenoids, and coil packs. It is often a good idea to label each plug with tape and a marker to aid in reassembly. Figure 5.

Why are there only 2 camshafts in a 5.4 Triton?

This allows for smoother and more powerful performance. The Ford F150 5.4 cylinder heads have only one camshaft each. 2 valves are at the inlet, 1 at the outlet. Degree of compression 9.8 to 1 allows the use of gasoline with octane number 92, which helps to save on fuel.

What is the Axle code on a F150?

On the last line, there’s a box labeled “AXLE” with a code the denotes your F150’s axle ratio. While the door sticker deals specifically with the rear gears, your truck’s front gears will match. Having the code is all well and good, but it doesn’t really tell you what you need to know.

What’s the towing capacity of a 2004 Ford F 150?

The total maximum towing capacity for Ford F-150s made in 2004 ranged from 5,900 lbs.-10,000 lbs. The only specifics made were to reduce the GCWR and Max. trailer weight by 500 lbs. if your truck came with 18″ wheels. 2004 Ford F 150 Conventional Towing Chart 2004 Ford F 150 5th Wheel Towing Chart

What’s the difference between a 2004 and a 2004 Ford F-150?

To keep these competitors at bay, Ford gathered its best engineers, cranked up the focus groups and set out to design the most advanced F-Series ever built. The result is a 2004 F-150 with a cleaner burning and more powerful V8, increased passenger and cargo room and broad-shouldered bodywork that looks the part of an all-American pickup.

Where was the 2004 Ford F-150 Lariat last serviced?

Purchased on 08/21/04 and owned in FL until 05/15/21. Driven an estimated 6,552 miles/year. Last serviced at 105,620 miles in Pembroke Pines, FL on 10/20/20 • Vehicle serviced. Mileage: 109,772 miles Body Type: Pickup Color: Black Engine: 8 Cyl 5.4 L

What should the gears be on a Ford F-150 STX?

But while some recommend 3.73 gears, other recommend jumping up to a 4.10. Which makes the choice even harder. “2018 Ford F-150 STX trucks come with 275 55 R20 wheels stock,” said ford390gashog. “I wouldn’t waste my money going to a 3.73. Yes, it will be noticeable.

What happens when you change the rear gears on a Ford F-150?

Including an excellent one from pdqford, who gets all scientific on us. “Going from a 265/60/18 up to a 275/65/18 is going to reduce your engine RPMs by 5%. It will also increase the weight of each tire from 37# to 42#.

Where do I find the axle ratio on my F150?

By far the easiest way is by checking your truck’s driver’s side door, where you’ll find your vehicle’s information sticker from the factory. On the last line, there’s a box labeled “AXLE” with a code the denotes your F150’s axle ratio. While the door sticker deals specifically with the rear gears, your truck’s front gears will match.

What are gears in my 2009 Ford F150?

Last post Re: What gears are in my 2009… Last post Re: How do you jack up our tr… Last post Re: Instrument Panel Swap for… Last post Low fuel rail pressure P0087 … Last post Re: turbo for the 5.0? Last post 2006 5.4L 3V Triton V8 lost c… Last post Re: Radiator Lines and is it … Last post Re: 96 F250 ZF6 Swap Wont Sta…

Can you change gears on Ford F-150 STX?

Pretty much everyone supports the change. But while some recommend 3.73 gears, other recommend jumping up to a 4.10. Which makes the choice even harder. “2018 Ford F-150 STX trucks come with 275 55 R20 wheels stock,” said ford390gashog. “I wouldn’t waste my money going to a 3.73. Yes, it will be noticeable.

Can you change the gears on a Ford F-150?

Swap your truck’s gear ratio, get them in your Ford’s rear and get going! *Please see product pages for any exceptions. Enter Your Email to Save Products. Increase your truck’s wheel torque with a new set of F-150 gears!

What kind of gear do I need for a 2009 Ford F-150?

If you’ve already got your 2009 F-150 and are scouting out mods, a gear swap might be on your mind. From your ranch-roaming King Ranch to the high-rolling Platinum edition, if you want to tap the power of your new truck, changing your ratios will get you the big kick you want.

Why do you need a new gear set on a Ford truck?

Adding a new gear set will put you back in your seat when you hit the throttle and it will let you get over tougher terrain than before. These gear sets are tough and they are made so that noise and premature wear won’t be an issue. Swap your truck’s gear ratio, get them in your Ford’s rear and get going!

What kind of gears does a 4WD F150 have?