How much horsepower does a 1970 302 have?
How much horsepower does a 1970 302 have?
The original 1969 – 1970 Ford Boss 302 engine was rated at 290 hp.
How much horsepower can you get out of a 302 Windsor?
Standard Ford 289 and 302 small-blocks were factory-rated between 200 and 230 hp. The vaunted 289 High-Performance engine was said to make 271 hp. Today, if a 302 Ford makes 360 hp on pump gas with a hydraulic cam, most experts consider it to be a pretty good motor-at least until Joe Sherman steps up to the plate.
Where did the 302 engine come from in a car?
The first attempt with the 302 was the “tunnel port”. Copied from the 427 NASCAR heads, the intake push rods ran through a small tube in the head, surrounded by huge intake ports and valves. The motors were used in the Trans Am/Series II racing with mild success.
What’s the difference between a 302 and a 427?
This design was first used on the 427, and then in 1968 on a special 302. These round intake ports were 3.8 sq. in. in area at the intake manifold face. The Tunnel Port 302 cylinder heads feature 2.12″ intake and 1.54″ exhaust valves. By comparison, the 289 High Performance engine used 1.78″ intake and 1.44″ exhaust.
How much horsepower does a Boss 302 have?
Due to the larger Cleveland-style heads, the Boss 302 weighs somewhat more than the normal 302, tipping the scales at 500 lbs. The street version was conservatively rated at 290 HP @ 5800 RPM. During the ’69 Trans Am season the racing engines were putting out 470 bhp at a 9,000 rpm redline.
What kind of engine does a 1967 Dodge 302 have?
The engine was complete with thermactor emissions control hardware, 289 Hi-Po style exhaust manifolds, and a thermostatic clutch radiator fan. SCCA rules required 1,000 engines in production for 1968 Trans Am homologation. As used in Trans Am competition the engines produced approximately 420 bhp with an 8,500 rpm redline
Is there a 4BBL carb for a 302?
I just wanted to see if anyone had any recommendations for a 4bbl carb. The engine is basically a stock 302 and has the motorcraft 2bbl carb on it now. It seems a lot of people run the Edelbrock set up but I have heard some mention they felt the 650 was too much for the 302. Any input is greatly appreciated.
What was the horsepower of the Ford 302?
The high performance 302 engine block was produced in Mexico and had a higher nickel content, therefore, making it stronger. The engine, however, was not very popular due to the fact that it put out only 315 horsepower which was of course much weaker than engines like the Ford 427 and the Ford 428.
What kind of engine does an Edelbrock 302 have?
The engine is basically a stock 302 and has the motorcraft 2bbl carb on it now. It seems a lot of people run the Edelbrock set up but I have heard some mention they felt the 650 was too much for the 302. Any input is greatly appreciated.
Why is the Ford 302 called a 5.0 liter?
Since the Ford 300 inline six already used the 4.9L emblem Ford decided to call the 302 a 5.0 liter to avoid any confusion. Plus telling someone that you have a 5.0 liter engine just sounds cooler than telling them you have a 4.9 liter.
