How often should you replace belts and hoses?
How often should you replace belts and hoses?
A good rule of thumb is to replace your V-Belt every 30,000 miles, while your serpentine belt and timing belt should be replaced every 50,000, although these numbers vary depending on the make and model of your car. Hoses should typically be replaced every four years.
Where to get new timing belts and radiator hoses?
If you need to replace the serpentine belt on your Ford F150 or repair the broken radiator hose on your Toyota Camry, stop by your local NAPA Auto Parts store near you and pick up the right replacement belts & hoses parts to get the job done. see less Looking for timing belts, serpentine belts or radiator hoses?
What to look for in belt and hose repair?
Visible belt or hose wear: Belts should be free of cracks, rust, or rib damage. Hoses should be free of holes and tightly connected. Leaking fluid around a hose or under your car: Any fluid leak should be evaluated by a mechanic.
Which is better gates or Dayco radiator belts?
For Dayco radiator hoses: check here for anything from curved to other parts. Gates is the more popular choice for a reason, but don’t underestimate Dayco either. While Gates’ timing belt kits and radiator hoses are better (thicker construction on the later, great reliability on the former), Dayco serpentine belts are a worthy competitor.
What do the belts and pulleys do on a car?
A series of belts and pulleys drive engine accessories such as the alternator, water pump, fan, power steering pump, air conditioning compressor and air injection pump. The timing belt maintains the precise synchronization required to keep the engine’s valves and pistons moving in sync.
Why do I need a new fan belt?
Everything from the water pump to the air conditioning. But let’s not get too poetic about it. All of those pulleys need belts to transfer the energy from the crank pulley, and those belts wear out with all of their spinning, heating, cooling, stretching, and shrinking.
How to install a new serpentine belt, fan belt or?
With clear access to your pulleys, you can now install your new serpentine belt. Remember to align the grooves of the belt with the grooves of your pulleys.
Where do you put the pulleys on a radiator?
You may also need to remove your radiator cooling fan to access the pulleys, They are usually bolted onto the back of the radiator or the radiator support, and should be fairly straightforward to remove. With clear access to your pulleys, you can now install your new serpentine belt.
When do timing belts and coolant hoses need replacement?
Sooner or later your car’s engine accessory drive belts, timing belts, and coolant hoses will dry out and crack. Regular inspections, coupled with timely automotive belt and hose replacement in accordance with your vehicle manufacturer’s automotive maintenance schedule, will help protect against roadside breakdowns and expensive repairs.
