Common questions

Is there a recall on the Ford Fusion?

Is there a recall on the Ford Fusion?

The recall began September 20, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford’s number for this recall is 18S20. Note: Owners are directed to use the parking brake until the recall remedy repairs can be made.

Are there any recalls on 2013 Ford Escape?

Ford’s number for this recall is 20S30. Ford Motor Company (Ford) is recalling certain 2013-2014 Ford Escape, and 2013-2016 Ford Fusion vehicles, equipped with six-speed automatic transmissions. The bushing that attaches the transmission shifter cable to the transmission may degrade over time and cause the bushing to detach from the transmission.

Are there any recalls on the Ford Fiesta?

Ford Motor Company (Ford) is recalling certain 2011-2014 Fiesta, 2013-2014 Fusion, 2015 Mustang, 2013-2015 Escape and C-Max, 2012-2015 Focus, 2014-2016 Transit Connect, 2013-2014 Lincoln MKZ, and 2015 MKC vehicles.

Are there any recalls on 2013 Ford Taurus?

Ford is recalling certain model year 2013 Explorer, Taurus, Flex, Fusion, Police Interceptor Sedan and Police Interceptor Utility vehicles; and certain model year 2013 Lincoln MKS, MKT, and MKZ vehicles. In the affected vehicles, the fuel delivery module may develop a crack, allowing fuel to leak. To see if your specific vehicle is affected

What’s the reliability score on a 2013 Ford Taurus?

The Reliability score is based on our latest subscriber survey of 2013 Ford Taurus owners. The owner comments describe problems respondents experienced with this vehicle.

Are there any recalls on 2013 Ford Flex?

Ford Motor Company (Ford) is recalling certain 2013-2018 Lincoln MKT and Ford Flex and Taurus vehicles with the Police Interceptor or SHO Performance Pack. The rear suspension toe links may fracture due to stress on the rear suspension. A fractured rear toe link will cause a sudden change in vehicle handling and increase the risk of a crash.

Why is there a recall on Ford Fusion?

The affected vehicles have electric power steering assist systems that may shut down as a result of a steering motor sensor fault. If the vehicle experiences a loss of power steering assist, extra steering effort will be required at lower speeds, increasing the risk of a vehicle crash.

” (The) steering gears may have been built without an internal retaining clip, which could result in impaired steering, including the loss of steering control, potentially increasing the risk of a crash,” wrote Kelli Felker, a Ford spokeswoman, in response to an Edmunds query. Ford is not aware of any accidents or injuries attributed to the recall.

Where can I get the steering gear replaced?

Ford dealers will replace the steering gear in the affected Fusions. Owners can contact Ford at 1-866-436-7332. Edmunds says: If you own one of the affected 2013 Ford Fusions, you should be able to address this problem quickly.

What do the buttons on the steering wheel do?

As a rule, steering wheel audio control buttons allow for adjusting volume, scanning radio stations and switching over to another tune.

Which is the best steering wheel cruise control switch?

GM Original Equipment™ Black Steering Wheel Cruise Control Switch by ACDelco®. Designed utilizing the latest technology, this product by ACDelco features premium quality and will perform better than advertised. Perfect for your… GM Original Equipment™ Black Steering Wheel Cruise Control Switch by ACDelco®.

Ford will notify owners, and dealers will replace the driver-side airbag inflator or module with an alternate one, free of charge. The recall began April 9, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford’s number for this recall is 21S12.

Why did my Ford Fusion air bag rupture?

In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Is there a recall on Ford Mustang inflators?

Ford Motor Company (Ford) is recalling certain air bag inflator and/or module replacement service parts that may have been used as part of a collision repair. The parts include certain driver-side air bag inflators and/or modules, designed to fit 2005-2014 Ford Mustang and Mustang GT500.

Why is there a recall on a Mercury Milan?

If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash. Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap.

Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.

In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Ford Motor Company (Ford) is recalling certain air bag inflator and/or module replacement service parts that may have been used as part of a collision repair. The parts include certain driver-side air bag inflators and/or modules, designed to fit 2005-2014 Ford Mustang and Mustang GT500.

If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash. Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap.

What to do if your Ford Fusion has a stuck valve?

Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary.

Why are the brakes on my Ford Fusion not working?

The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly. If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.

What’s the price of a 2009 Ford Fusion?

The Manufacturer’s Suggested Retail Price (MSRP) for a 2009 Ford Fusion runs from around $19,500 for the base S sedan to a high of about $31,500 for a fully-loaded SEL V6 all-wheel drive model. A look at the Fair Purchase Price shows the typical transaction price being paid for a Fusion in your area,…

What makes a Ford Fusion a reliable car?

The Reliability score is based on our latest subscriber survey of 2009 Ford Fusion owners. The owner comments describe problems respondents experienced with this vehicle. Antilock system (ABS), parking brake, master cylinder, calipers, rotors, pulsation or vibration, squeaking, brake failure or wear.

Are there any recalls on the Ford Fusion?

Based on information received from our latest subscriber survey, our reliability history charts give you a rundown on how used vehicles are holding up in 17 potential trouble spots, ranging from the engine, transmission, and brakes to power equipment and the electrical system. The 2009 Ford Fusion has been recalled 7 times by NHTSA. View Recalls

Why was there no manual transmission on the Ford Fusion?

Almost certainly due to an anticipated lack of much market demand, however, Ford didn’t see fit to place a manual transmission in the V6-powered models, essentially cutting short the Fusion’s potential as a bona fide driving enthusiast’s car.

Author Image
Ruth Doyle