What does the gem module on a 98 F150 do?

What does the gem module on a 98 F150 do?

Does the GEM module on a 98 f150 4.6 4×4 give power to the the 4×4 solonoid at the T case when you flip the 4×4 switch on the dash? Video Player is loading. This is a modal window.

Where is the ground wire on my truck?

I have a 1999 F350 4X4, I am having issues with ground wire on the passengers side battery. Every time I try to start the truck I get clicking and it wont turn over . I will have to have someone hold the ground wire in place on the passenger side battery in order to get the truck to turn over.

How does the gem module control the 4WD?

Ok what exactly does the GEM module control, And how does it interface with the electronic 4wd. Now the radio wont work either the clock etc light up but the radio wont turn on may be unrelated or maybe part of this spare gem module?

Can a gem module be wired to a reguar?

I had Gem module problem just like yours and didnt feel like buying a new one so I just wired the wires from the under hood part as stated above to by-pass the gem module and wired them to a reguar 3 way switch in cab if having another switch in the cab doesnt bother you it only costlike $2 for switch and whatever wireing.

Does the GEM module on a 98 f150 4.6 4×4 give power to the the 4×4 solonoid at the T case when you flip the 4×4 switch on the dash? Video Player is loading. This is a modal window.

Ok what exactly does the GEM module control, And how does it interface with the electronic 4wd. Now the radio wont work either the clock etc light up but the radio wont turn on may be unrelated or maybe part of this spare gem module?

How to change the gem module on a Sparkys F150?

Four fasteners with 13 mm heads. Now wiggle, pry and twist the fuse box and GEM module assembly down. After the assembly is down far enough unplug the remaining harness connectors from the GEM module. Almost there. The assembly is now free of the vehicle.

I have a 1999 F350 4X4, I am having issues with ground wire on the passengers side battery. Every time I try to start the truck I get clicking and it wont turn over . I will have to have someone hold the ground wire in place on the passenger side battery in order to get the truck to turn over.

How much does it cost to repair a Ford truck gem module?

Send in your most FORD trucks Multi Function GEM module 1996-2004 for repair. Repair price is $118 with 1 year warranty. Turn around * is 3-5 business days with Proper Diagnostic Cods. Not all Module are repairable . You pay for your shipping to us, we pay for the return shipping (by post office 2-3 days Priority Mail) back to you.

Where do you go to replace a gem module?

So I guess that a GEM replacement job must go to a Ford dealership. Have to assume they program it correctly in order to have all those features you mention to be operational. news: [email protected]… > [email protected]… >> computer reads my speed correctly. >> Is that true.?

How does the gem control the 4×4 switch?

The GEM gets a signal from the 4×4 switch and controls the transfer case shift relay module which shifts the transfer case. So you’ve not only got the GEM but the switch and t-case shift relay module and all the wiring and several fuses that can cause the problem.

What was the problem with my 2003 F-150?

I just had the work done to my 2003 F-150, had the GEM, Fuse block and the windshield replaced/re-sealed, and it was the windshield. All under the windshield was starting to rot away.

How to check the gem Module Control 4X4?

First things first, check fuse 17 under the hood and fuse 12 under the dash. Then I would use a volt meter to first check that there is power at pin 3 then measure the resistance between the two dark blue wires at the switch, pin 3 and pin 2. The three positions of the switch should read 3.9k, 1.1k and 360 ohms.

First things first, check fuse 17 under the hood and fuse 12 under the dash. Then I would use a volt meter to first check that there is power at pin 3 then measure the resistance between the two dark blue wires at the switch, pin 3 and pin 2. The three positions of the switch should read 3.9k, 1.1k and 360 ohms.

Is the leaky windshield / gem module problem?

I found out that my friend that has a 2002 F-150 has the same issue and was due to the windshield like me. Im having the infamous leaky windshield issue. I ordered the aftermarket gem, and still had the phantom electrical problems. Radio on off, stater going on by itself etc.

Is the gem module on a Ford Explorer obsolete?

I was told that the gem module I have a 1996 Ford Explorer. I was told that the gem module that controls the speedometer, windshield wipers and window is a obsolete part. … read more 2002 Mazda Tribute. The door locks only work when the key is 2002 Mazda Tribute.

Where is the 4×4 Shift relay located on a 1997 Ford F-150?

Ford f-150 … read more Vocational, Technical or Tra… I need to locate the alternate fuses pleas. I don’t have the Senior Master Ford Tech. H… Diesel, Automatic trans, full… Vocational, Technical or Tra… I have a 1997 Ford f-150 4×4 that the windshield piper system isnt working.

How to locate the 4×4 relay location please?

The GEM module is what controls each of these functions so it gets the inputs and then sends the commands. So we need to go to the GEM module and measure the voltage on pin 8 and operate the switch and see that the voltage changes. If not the switch is the issue. If it is, the GEM is the issue. Let me know what you find and we can go from there.