What does the P2004 Ford engine light mean?

Engine Light ON (or Service Engine Soon Warning Light) P2004 FORD Meaning The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers.

How does vacuum solenoid work on Ford P2004?

Under about 3000 rpm the vacuum solenoid will be energized. This will allow manifold vacuum to be applied and the butterfly valve plates to stay closed. Above approximately 3000 rpm , the vacuum solenoid will be de-energized. This will allow vacuum to vent from the actuator and the butterfly valve plates to open. P2004 FORD More Information

What causes the IMRC on a Ford P2004?

P2004 FORD Possible Causes Intake Manifold Runner Control (IMRC) monitor signal shorted to power Faulty Intake Manifold Runner Control (IMRC) actuator Faulty Intake Manifold Runner Control (IMRC) solenoid Damage Powertrain Control Module (PCM) Blocked vacuum hoses

When is the P2004 intake manifold runner control set?

The P2004 is set when the Intake Manifold Runner Control (IMRC) is commanded closed by the Powertrain Control Module (PCM), but the IMRC indicates open. P2004 FORD Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light) P2004 FORD Meaning

What does the P2004 diagnostic trouble code mean?

All our repairs are backed by our 12-month / 12,000-mile warranty. The P2004 diagnostic trouble code indicates that the intake manifold runner control (IMRC) is stuck in the open position on Bank 1.

What does P2004 stand for in OBD II?

A stored code P2004 in your OBD II equipped vehicle means that the powertrain control module (PCM) has detected that the intake manifold runner control (IMRC) actuator for engine bank one is stuck in the open position. Bank 1 denotes that the problem has occurred in the bank of the engine that contains…

How much does it cost to fix a P2004 Ford code?

The cost of diagnosing the P2004 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P2004 FORD code detected?

What was the code for the P2004 intake manifold runner?

2009 Doge Journey SE, 2.4L V4 with 87000 miles Code 1 � p2004 “Intake Manifold Runner Control Stuck Open Bank 1” – I replaced the intake manifold runner control valve. It was relatively easy. 3 bolts and 1 connector.

How to diagnose Ford P2004 intake manifold control?

Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost to diagnose the P2004 FORD code is 1.0 hour of labor.

What does the code P2004 mean on a car?

What does code P2004 mean? Code P2004 stands for Intake Manifold Runner Control Stuck Open Bank 1. The intake manifold directs air into the engine via a series of runners. To improve engine performance, many late-model vehicles use what’s referred to as an intake manifold runner control (IMRC) system.

What does the p0304 code on Ford cylinder 4 mean?

Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. P0304 FORD Tech Notes The P0304 code means that the cylinder 4 is misfiring or is randomly misfiring. Start by checking for intake leaks and if no leaks are found the next step is to replace the spark plugs on cylinder 4.

When does diagnostic trouble code set on Ford P2004?

The Diagnostic Trouble Code (DTC) sets when the IMRC is commanded close, but the IMRC monitor indicates open. Need more information on how to fix the P2004 FORD code?

What is the P2006 Ford intake manifold runner control?

P2006 Ford Description The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers. Each IMRC housing is an aluminum casting with two intake air passages for each cylinder.

What is the IMRC on a Ford P2004?

P2004 Ford Description The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers. Each IMRC housing is an aluminum casting with two intake air passages for each cylinder.

What are the dimensions of a 2003 Ford Ranger?

Torsion bar on select models (Edge) Outside Rotor Diam (in.) Inside Rotor Diam. (in.) Total Swept Area per Axle (sq. in). Fuel Capacity (gal.) Dimensions and capacities are in inches unless otherwise noted. Maximum Loaded Trailer Weights (lbs.) – Automatic Transmission Maximum Loaded Trailer Weights (lbs.) – Manual Transmission

How much does it cost to diagnose P2004 Ford code?

Labor: 1.0 The cost of diagnosing the P2004 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P2004 FORD code detected?

What are the symptoms of a P2004 intake manifold code?

Symptoms of a P2004 code may include: Reduction in engine performance, especially at low RPM levels Possible causes for this engine code include: Loose or binding intake manifold runners Bad intake manifold runner position sensor Open or shorted wiring in the IMRC actuator solenoid control circuit Corroded IMRC actuator solenoid connector face

What are the symptoms of a P2004 OBD code?

P2004 symptoms 1 An illuminated check engine light. 2 Poor engine performance. 3 Reduced fuel economy.

What causes an intake manifold code of P2004?

Code P2004 is typically caused by one of the following: A failed IMRC actuator A problem with the intake manifold or linkage Wiring issues

What’s the price of a 2003 Ford Ranger?

TrueCar has 45 used 2003 Ford Ranger s for sale nationwide, including a XLT Appearance Supercab 4-Door 3.0L RWD and a XL Supercab 2-Door 3.0L RWD. Prices for 2003 Ford Ranger s currently range from $2,995 to $13,996, with vehicle mileage ranging from 33,663 to 244,217.

How much does it cost to diagnose a P2004 Ford code?

The cost of diagnosing the P2004 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P2004 FORD code detected?

What does the P2004 Ford engine light mean?