How to replace rear strut, coil spring, and Mount Assembly?

Remove the two bolts at the rear lower control arm and the frame. Lower the rear control arm by detaching it from the rear axle carrier. Pull out the rear strut once you have enough room to do so.

Can you remove and replace a strut assembly?

Remove and replace the complete Strut Assembly in one piece. Complete Strut Assembly – Equipped with Strut, Coil, Spring & Mounts – Ready to Install. Our Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.

How do you remove a spring strut from a car?

Make sure to put jack stands under the car to be safe.Remove the wheel from the car. Remove the lining from the wheel housing. Remove the plastic cover on top of the strut. Underneath it are 3, 13 mm nuts that you need to remove. Remove the three nuts on top of the spring strut mounting. This is where the strut connects to the frame.

Where to place the spring on a Toyota strut?

Position the first compressor bottom hook approximately 1 1/2 coil turns above the spring. Position the upper hook where the compressor stem is as as possible much vertical with the ground. If it is tilted towards the upper mount, attaching a 19 mm socket for applying tension will be difficult.

Remove the two bolts at the rear lower control arm and the frame. Lower the rear control arm by detaching it from the rear axle carrier. Pull out the rear strut once you have enough room to do so.

Which is better to replace struts or spring?

Complete strut assemblies cost more than just the strut, but they’re a much better option because they allow you to do the job yourself and get all new parts. The new spring restores factory ride height and firmness, and the new strut mount and bearing provide smoother turning and quieter operation.

When to replace stop bumpers with struts?

If the measurements are out of spec or the stop bumpers are damaged, it’s time to consider installing new springs along with your new struts. Struts don’t determine ride height and struts don’t prevent your car from bottoming out. Only the springs keep your car at the proper ride height and prevent it from bottoming out.

How to replace rear strut, coil spring, and Mount Assembly?