Why is my tail light not working but brake light is working?
Why is my tail light not working but brake light is working?
Regardless of what bulbs you are using the tail & license plate lights are on different circuits and fuses than the brake lights. You’ll probably find a blown fuse. “If you really believe you get what you pay for there’s no such thing as a good deal.” You may have a blown fuse. Also reverse the polarity of the bulb since it only works one way.
Where do the tail lights go on a Subaru?
“P” of the Switch goes to FB-3, which connects to the tail, clearance and license plate lights circuit. When the Switch is in the ON position, the exterior lights work, so that confirms all the wiring from “P” onwards through FB-3.
Why does my tail light not flash when I unlock the door?
I suspect the “Tail” fuse is the problem. It is #10 in the fuse panel ( adjacent to #11 the “Tail & Panel” fuse) So neither the front or rear lights flash when you lock or unlock the doors?.
Why does the brake light only come on when you apply the brakes?
This means it has one filament for the tail light and one filament for the brake light. Your led will only come when the brakes are applied because you don’t have two lights in that one led. You may have a blown fuse. Also reverse the polarity of the bulb since it only works one way. Click to expand…
Why are my brake lights not working but my tail lights are?
Damaged or disrupted wiring can cause tail lights not to work, but brake lights are. The two lightings use different wiring as each bulb has got its power supply. A recent accident at the tail end of your car can increase the likelihood of this problem.
Is it dangerous to drive with broken tail lights?
So, driving with broken tail lights is very dangerous. Actually, people find out about their tail light problem when the police officer pulls them over. This is because the tail light malfunction is not that easy to spot. Usually, brake lights are the problem and the tail lights work just fine. But, sometimes it’s the opposite.
What to do if your tail light is not working?
The use of flashlight can help you identify the tail light fuse. After identifying the right fuse, you need to remove and inspect it. When the metal found inside the fuse is intact, the fuse is okay. However, a broken wire indicates that the wick is faulty.
“P” of the Switch goes to FB-3, which connects to the tail, clearance and license plate lights circuit. When the Switch is in the ON position, the exterior lights work, so that confirms all the wiring from “P” onwards through FB-3.
