What is code P0267?
What is code P0267?
3 injector circuit
P0267 is an OBD-II diagnostic trouble code which indicates that the engine control module (ECM) detected the cylinder number 3 injector circuit having a high resistance open circuit, or shorted windings.
What does OBD code p0267 mean on a car?
Although generic, the specific repair steps may vary depending on make/model. The OBD trouble code P0267 is a generic powertrain code common to all vehicles. Although the code’s reference is the same, the repair procedure may vary somewhat with the manufacturer.
Which is power stroke 6.0 Fuel Injection Control Module?
Power Stroke 6.0L FUEL INJECTION CONTROL MODULE – FICM – COMPLETE: 4C3Z-12B599-ABRM The FICM drives the fuel injector solenoids based on fuel and timing commands (via *CAN2 link) from the PCM.
Where are the FICM part numbers on a fuel injector?
Note: International FICM part numbers are located on a label on the connector side of the module. To drive the fuel injector, the FICM produces two control signals for each injector. The open coil is driven (via a 20A pulse) to open the injector.
When does a fuel injector malfunction what happens?
When a fuel injector malfunctions, it causes ripples down the line, meaning the engine’s operating parameters change due to the mixed signals at the PCM. If the fuel injector spray pattern is reduced, a lean mixture will result. The ripple begins. The oxygen sensor signals a lean mixture to the PCM.
Why is my cylinder 1 injector low code?
This code implies that the powertrain control module (PCM) has experienced a low voltage situation involving the fuel injector for the #1 cylinder in the firing order. In short, this fuel injector is malfunctioning for one of a variety of reasons. It is important to diagnose and repair this type of problem as soon as possible.
Although generic, the specific repair steps may vary depending on make/model. The OBD trouble code P0267 is a generic powertrain code common to all vehicles. Although the code’s reference is the same, the repair procedure may vary somewhat with the manufacturer.
What are the symptoms of a p0261 code?
The symptoms displayed for a P0261 code may include: 1 The check engine light will illuminate and code P0261 will set 2 The engine will run rougher than normal 3 A lack of power 4 A big drop in fuel economy will result
Power Stroke 6.0L FUEL INJECTION CONTROL MODULE – FICM – COMPLETE: 4C3Z-12B599-ABRM The FICM drives the fuel injector solenoids based on fuel and timing commands (via *CAN2 link) from the PCM.
