How does the EGR work on a Ford Transit?
How does the EGR work on a Ford Transit?
Monitored the EGR valve again following startup, and the EGR remains open from startup until engine coolant temperature is exactly 38 degrees Celsius, and engine runs very lumpy during this time, until bang on 38 Celcius the EGR error reduces to 0% and the engine noise changes completely and runs smoothly.
When to clear DTCs on Ford Transit?
However, strange thing is that when I monitor EGR valve position with engine running using Forscan, it reports an error of 20-30% between commanded and actual valve position from start-up for about 5 minutes, until the engine is warm (during this period I can clear DTCs and the same P042f code returns).
Why does my Ford Transit van not start?
And then the other day the van refused to start – it would fire, run very lumpily for a couple of seconds, cough, and then stall. It would do this repeatedly, never getting better or worse. Using Forscan I reset the EGR valve adaptations, and then the van started straight up.
What does fault code p042f-egr mean?
Except for one code, P042f – EGR valve stuck closed. I cleaned the EGR and inlet manifold. But even after cleaning (and clearing DTCs) the EGR flags up the same fault code. Van occasionally feels very low on power at low revs, to the extent that it will barely accelerate in 1st gear, until revs are up to close to 2k.
When does EGR go back to normal Ford Transit?
However, after 5 mins, when the temperature gauge starts to come up, the error between commanded and actual EGR disappears, right down to 0% in steady state, and I can then clear DTCs and the EGR code doesn’t return. I have repeated this a few times, letting engine cool down, and it always behaves the same.
What kind of engine does a Ford Transit van have?
The Transit van has a gas engine standard, but the big news is the new diesel. This Power Stroke from Ford is a five-cylinder diesel that’s been in service outside the USA for more than a decade. The new Transit van gets the latest version and it produces a 3.2-liter, 195-cid inline mill that’s rated at 185 hp and 350 lb.-ft. of torque.
What’s the problem with my 2013 Ford Transit?
The all new 2013 Transit Mk8 Forum. Transits 2013+ Wonder if anyone can give any advice on a strange problem I’ve been having recently on my 2015 MK8 2.2 Euro 5. Bought the van relatively recently, and it had various relatively minor fault codes showing in the following weeks, all of which I have chipped away at and sorted gradually.
However, strange thing is that when I monitor EGR valve position with engine running using Forscan, it reports an error of 20-30% between commanded and actual valve position from start-up for about 5 minutes, until the engine is warm (during this period I can clear DTCs and the same P042f code returns).
