What can cause a Flexplate to break?
What can cause a Flexplate to break?
The following causes for cracked flexplate failures: 1) Out of balance engine or torque converter. 2) Bad starter drive can cause teeth or ring gear to wear rapidly or break off. Teeth can also break when engine is running and starter is engaged.
What happens when I replace my flex plate?
Consequently, the teeth of the ring gear, can become damaged over time, causing a grinding sound. Ring gear problems can damage the starter motor as well. So, if you find you have to replace your flex plate, you might want to check your starter as well.
Can a cracked flex plate cause transmission problems?
A cracked flex plate is almost always, a sign of other problems. So, if not properly diagnosed, it will occur again and often damage to the transmission may follow. The same things that caused the flexplate to crack, can also cause transmission problems.
What to do if you have a flexplate problem?
So, if you suspect you have a flexplate problem, there are a couple ways to investigate further. So, if you listen to the transmission bell housing with a stethoscope, while the engine is idling; any sounds coming from inside the bellhousing indicate, flexplate problems. Some bell housings have an, inspection port.
What happens if you fail to torque a flexplate?
Failure to torque the bolts, to proper specifications and in proper sequence. Failure to use starter shims, where required. Poor quality parts. Missing Dowel pins. A loose bolt on a flexplate or a crack between it’s bolt holes can result in a; knocking or rattling sound.
Consequently, the teeth of the ring gear, can become damaged over time, causing a grinding sound. Ring gear problems can damage the starter motor as well. So, if you find you have to replace your flex plate, you might want to check your starter as well.
A cracked flex plate is almost always, a sign of other problems. So, if not properly diagnosed, it will occur again and often damage to the transmission may follow. The same things that caused the flexplate to crack, can also cause transmission problems.
So, if you suspect you have a flexplate problem, there are a couple ways to investigate further. So, if you listen to the transmission bell housing with a stethoscope, while the engine is idling; any sounds coming from inside the bellhousing indicate, flexplate problems. Some bell housings have an, inspection port.
What does the flexplate do on a car?
The flexplate and the ring gear, fitted to the outside of it. The starter motor, engages this ring gear to start the engine. There may be times that you have to remove it. But, if you have to remove the flexplate, it must go back on the same way.
