What is the position of the ignition key?
What is the position of the ignition key?
B (ACC/ACCESSORY): This position provides power to some of the electrical accessories. It unlocks the steering wheel and ignition. To move the key from ACC/ ACCESSORY to LOCK/OFF, push in the key and then turn it to LOCK/OFF.
What happens when the key is turned to the accessories position?
When the key is turned to the accessories position, certain accessories, such as the radio, are powered; however, accessories that use too much battery power, such as window motors, remain off in order to prevent the car’s battery from being drained.
What are the different ignition positions on a Chevy Silverado?
Your vehicle is equipped with four different ignition positions. To turn the engine off, stop your vehicle and shift into park, then turn your key in the ignition switch to the LOCK/OFF position by turning counterclockwise, or closest to you.
Which is the only position from which the key can be removed?
This is the only position from which the key can be removed. This locks the steering wheel, ignition, and automatic transmission. Do not turn the engine off when the vehicle is moving. This will cause a loss of power assist in the brake and steering systems and disable the airbags.
B (ACC/ACCESSORY): This position provides power to some of the electrical accessories. It unlocks the steering wheel and ignition. To move the key from ACC/ ACCESSORY to LOCK/OFF, push in the key and then turn it to LOCK/OFF.
Your vehicle is equipped with four different ignition positions. To turn the engine off, stop your vehicle and shift into park, then turn your key in the ignition switch to the LOCK/OFF position by turning counterclockwise, or closest to you.
This is the only position from which the key can be removed. This locks the steering wheel, ignition, and automatic transmission. Do not turn the engine off when the vehicle is moving. This will cause a loss of power assist in the brake and steering systems and disable the airbags.
What does the D position on the Ignition Do?
D (START): This position starts the engine. When the engine starts, release the key. The ignition switch will return to ON/RUN for normal driving. A warning tone sounds when the driver door is opened if the ignition is still in ACC/ACCESSORY and the key is in the ignition.
What do you need to know about the ignition?
The key must be fully extended to start the vehicle. To shift out of P (Park), turn the ignition to ON/RUN and apply the brake pedal. A (STOPPING THE ENGINE/ LOCK/OFF): When the vehicle is stopped, turn the ignition switch to LOCK/OFF to turn the engine off. Retained Accessory Power (RAP) will remain active. See Retained Accessory Power (RAP) .
When does the ignition switch turn on or off?
The ignition switch will then automatically turn to the ‘ON/RUN’ position for driving. Please note, your engine will only start when your car is shifted into park or neutral in an automatic transmission, and neutral in a manual transition.
How does the ignition work on a Chevy Silverado?
To start, keep your foot on the brake pedal (or on the clutch if your vehicle has a manual transmission) and turn the key clockwise, away from you. When you hear the engine start, release your grip on the key. The ignition switch will then automatically turn to the ‘ON/RUN’ position for driving.
Why does the key not turn in the ignition?
The key won’t turn in the ignition If the key won’t turn in the ignition, it could be for a couple of reasons: Often this happens when the steering is locked by the ignition lock with the front wheels turned aside (e.g. when parking on a hill) or when one of the front wheels is pushed against something (e.g. curb stone).
Can you use a tool to turn the ignition?
Notice: Using a tool to force the key to turn in the ignition could cause damage to the switch or break the key. Use the correct key, make sure it is all the way in, and turn it only with your hand. If the key cannot be turned by hand, see your dealer. The key must be fully extended to start the vehicle.
The key must be fully extended to start the vehicle. To shift out of P (Park), turn the ignition to ON/RUN and apply the brake pedal. A (STOPPING THE ENGINE/ LOCK/OFF): When the vehicle is stopped, turn the ignition switch to LOCK/OFF to turn the engine off. Retained Accessory Power (RAP) will remain active. See Retained Accessory Power (RAP) .
Why does the ignition switch need to be in the Accessory position?
The ignition switch must be in this position before the driver can remove or insert the key. Accessory: In this position, the ignition switch supplies battery power to the vehicle’s accessories, such as the radio and lights. But it doesn’t provide power to the engine control circuits.
What happens if you don’t turn the ignition key?
Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler.
Notice: Using a tool to force the key to turn in the ignition could cause damage to the switch or break the key. Use the correct key, make sure it is all the way in, and turn it only with your hand. If the key cannot be turned by hand, see your dealer. The key must be fully extended to start the vehicle.
The ignition switch must be in this position before the driver can remove or insert the key. Accessory: In this position, the ignition switch supplies battery power to the vehicle’s accessories, such as the radio and lights. But it doesn’t provide power to the engine control circuits.
Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler.
What’s the best way to turn off the ignition?
If the vehicle cannot be pulled over, and must be shut off while driving, turn the ignition to ACC/ACCESSORY. The ignition switch can bind in the LOCK/OFF position with the wheels turned off center. If this happens, move the steering wheel from right to left while turning the key to ACC/ACCESSORY.
