What kind of air conditioner does a Ford Fusion have?

What kind of air conditioner does a Ford Fusion have?

2013-2019 FORD FUSION 2.0/2.5L GENUINE OEM REMAN. IN USA A/C COMPRESSOR W/WRTY! (Fits: Ford Fusion) Automobile air conditioning systems for the Ford Fusion use a combination of a compressor and a compressor clutch to control the flow of coolant through the pipes that facilitate the cooling of air in the system.

What is owner’s manual for 2015 Ford Fusion?

2015 FUSION Owner’s Manual FE5J 19A321 AA The information contained in this publication was correct at the time of going to print. In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.

How do you install a compressor on a Ford Fusion?

Remove the three instrument panel cowl side upper bolts. To install, tighten to 23 Nm (17 lb-ft). CAUTION: To avoid an improper connection at the bulkhead electrical connector, be sure to position the connector for installation then push the release handle to the full DOWNWARD position until it clicks.

Why is the a / C not turning on on my Ford Fusion?

But on the Fusion, if the A/C compressor is not turning on, you will need to change the Evaporator Discharge Air Temperature Sensor. The sensor tells the computer what the air’s temperature is at the exit point of the evaporator. When it senses that it’s cold, it turns off the compressor.

When to replace an A / C receiver drier?

Receiver/driers are used in expansion valve equipped A/C systems. It is the job of the receiver/drier to protect the rest of the A/C system against moisture damage. The desiccant bag can only hold a finite amount of moisture. If too much water gets into the system, the receiver/drier should be replaced.

Where is the drier on an air conditioner?

The receiver/drier is located between the located on the high-pressure side of the A/C system between the condenser and evaporator.

What are the signs of a failed a / C drier?

Signs of a failed receiver/drier include desiccant in the A/C system, moisture in the system, ice build up on the receiver/drier or a temperature drop between the unit inlet and outlet. In order to safely and efficiently replace your A/C receiver/drier you need a couple of basic tools: Step 1: Locate the receiver/drier.