Common questions

Where can I buy a used Ford Explorer transmission?

Where can I buy a used Ford Explorer transmission?

Buy used Ford Explorer transmission from our network that offers up to a two-year warranty on qualified units! We carry a wide-ranging catalog of used Ford transmissions for all applications including gas and diesel engines. Buy your used Ford Explorer transmissions from us and save time and money.

When did the transmission on my Ford Explorer start slipping?

On a used 2016 Explorer bought it in August 2018 with 36,000ish miles on it. By the next year the transmission started slipping, called my dealers service dept and they wanted me to bring it in and leave it with all the others they were repairing, inspecting for at least a week without any vehicle loaner.

How long does it take to repair transmission on Ford Explorer?

After researching this light could indicate major transmission issues so we had it towed to the dealer. End result was a rebuilt transmission and 30+ days for the repair at the dealership. 4 months later, car is experiencing the same acceleration/deceleration issues and is AGAIN having the transmission removed.

Is there a problem with the 2016 Ford Explorer?

No one has added a helpful site for this 2016 Explorer problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: MY 2013 Ford Escape had the same issue with the transmission, every time I took it to get checked out Ford Service could not replicate the transmission slipping…so it was all in my head!!!! RIGHT?

When did I get my Ford Explorer servos installed?

I ordered both your overdrive and intermediate servos for my 2004 ford explorer on Thursday August 22, 2019 and my order was delivered to my front door on Monday August 26, 2019. My husband installed these servos this past weekend on Saturday August 31st and Sunday September 1st and my transmission is shifting “smooth as butter” again.

How to fix a Ford Mercury explorer servo bore?

A small Barber’s mirror was a great help in seeing inside the transmission and doing the cleaning and prep work. The most difficult part of the job was getting the snap ring out and back in again. The transmission shifts like new with 213,000 Mike’s on the odometer.

What kind of engine does the Ford Explorer have?

For 2000, Ford added flex-fuel capability to the Explorer for the first time. A Mazda-produced 5-speed manual was standard with the 4.0L OHV V6 engine; the SOHC V6 was not offered with a manual transmission until 2000, receiving a heavier-duty version of the Mazda-sourced 5-speed.

What kind of fluid does Ford Explorer use?

Ford Mercon V is the fluid required for this transmission. In this video I show you how to fill and adjust the 5R55S after a repair that has required a fluid drain or loss. If you follow this procedure you will have no issues with the proper fill level of the 5R55S.

When did the Ford Explorer hit the market?

When it hit the market for the 1991 model year, it followed the lead of the Jeep Cherokee and Chevrolet S-10 Blazer by offering off-road capability and rugged styling with family-friendly utility.

Buy used Ford Explorer transmission from our network that offers up to a two-year warranty on qualified units! We carry a wide-ranging catalog of used Ford transmissions for all applications including gas and diesel engines. Buy your used Ford Explorer transmissions from us and save time and money.

When did the Ford Explorer Sport Trac come out?

In 2001, Ford introduced the Ford Explorer Sport Trac, which featured four SUV doors with a truck bed. Drivers noted the comfortable and roomy space; however, this generation of the Ford Explorer rated low in handling and off-road capability. Over the next several years, the Ford Explorer saw several structural changes.

What kind of engine does a Ford Explorer have?

The standard engine is a 3.5 liter, 290-hp V6 engine, while a 237-hp turbo charged, 4-cylindar engine as an option. The Ford Explorer transmission is a six-speed automatic, which can be driven as rear-wheel or all-wheel.

When did the Ford Explorer 5.0L come out?

For 1997, revised cylinder heads increased output of the 5.0L V8 to 215 hp. The 5.0L became available in the AWD Ford Explorer in 1997.

In 2001, Ford introduced the Ford Explorer Sport Trac, which featured four SUV doors with a truck bed. Drivers noted the comfortable and roomy space; however, this generation of the Ford Explorer rated low in handling and off-road capability. Over the next several years, the Ford Explorer saw several structural changes.

The standard engine is a 3.5 liter, 290-hp V6 engine, while a 237-hp turbo charged, 4-cylindar engine as an option. The Ford Explorer transmission is a six-speed automatic, which can be driven as rear-wheel or all-wheel.

For 1997, revised cylinder heads increased output of the 5.0L V8 to 215 hp. The 5.0L became available in the AWD Ford Explorer in 1997.

How to edit a Ford transmission identification chart?

This is a demo – You can edit the text! ? Type in the visual editor on the left or the source editor on the right and see them both change in real time. Set up the cleaning preferences below and click the Clean HTML button to clean the HTML source code.

What kind of transmission does the Ford Ranger have?

The two major versions of this new transmission were the 4R44E and 4R55E. The transmissions are fundamentally similar in design, varying only in the durability of key components based on the type of duty they were to be used for. The 4R44E was used in lighter-duty applications, namely with 4-cylinder or 3.0 L V6 models of the Ford Ranger pickup.

What causes no up shifting on Ford 4R55E?

The shop manual will show you the correct position. 3) No 3rd or 4th gear: If the 2 – 3 shift valve spring is missing, or someone has installed it wrong, you will lose 3rd and 4th gear. 4) No up shifting: This problem can be caused by the solenoid regulator valve being out of position.

What kind of transmission does a Ford Explorer use?

Ford Automatic Transmission Application Guide Model Years Engine Type / Size TYPE EXPEDITION 2007-2008 V8 5.4L 6R75/80 EXPLORER 95-96 V6 4.0L 4R55E EXPLORER 96-01 V8 5.0L 4R70W EXPLORER 97-01 V6 4.0L 5R55E

The shop manual will show you the correct position. 3) No 3rd or 4th gear: If the 2 – 3 shift valve spring is missing, or someone has installed it wrong, you will lose 3rd and 4th gear. 4) No up shifting: This problem can be caused by the solenoid regulator valve being out of position.

What causes no up shifting on a Ford Ranger?

4) No up shifting: This problem can be caused by the solenoid regulator valve being out of position. 5) Slips on the 2 – 3 shift: There are two different issues that can cause this problem.

The two major versions of this new transmission were the 4R44E and 4R55E. The transmissions are fundamentally similar in design, varying only in the durability of key components based on the type of duty they were to be used for. The 4R44E was used in lighter-duty applications, namely with 4-cylinder or 3.0 L V6 models of the Ford Ranger pickup.

Where can I find the Ford transmission identification chart?

Please find below all the cleaning preferences, the Find And Replace tool, the Lorem-ipsum generator, the Case Converter and much more! Don’t forget to save this link into your bookmarks and share it with your friends.

What kind of transmission does a Ford Aerostar have?

Ford Automatic Transmission Application Guide Model Years Engine Type / Size TYPE AEROSTAR 95 V6 3.0L/4.0L A4LD AEROSTAR 96-97 V6 3.0L 4R44E AEROSTAR 96 V6 4.0L 4R55E AEROSTAR 97 V6 4.0L 5R55E

Can a Ford Explorer get an automatic transmission?

Highly functional and full of plenty of room for the whole family, your Ford Explorer delivers when you need it to most. Make sure that trend continues by swapping out that faulty transmission in favor of a new automatic transmission for Ford Explorer from AutoZone. When your transmission begins to fail, you may notice a number of key signs.

What kind of transmission does a Ford 2000E have?

FORD LOOK-UP TABLE Model Years Transmission Type Engine Type/Size Transmission Model 2000E 1974 C4 2000E 1975-1981 C3 AEROSTAR 1995 4 SP RWD/4X4 V6 3.0L/4.0L A4LD AEROSTAR 1996 4 SP RWD/4X4 V6 4.0L 4R55E

What kind of transmission does a Ford Ranger A4LD have?

The A4ld has a 2.47 first gear and a 0.75 overdrive. For 1995, the 4R44E (4 cylinder – light duty) and 4R55E (6 cylinder – heavy duty; i.e. Explorer) electronically controlled transmission replaced the A4LD. It is mechanically identical to the A4LD.

When was the A4LD transmission introduced in the Bronco II?

The A4LD four speed overdrive transmission was introduced in the 1985 Bronco II/Ranger and saw use behind many 4 and 6 cylinder engines until the 1995 model year when it was replaced by the 4R44E and 4R55E electronic transmissions.

What are the specs for a 1997 Ford Explorer?

Basic Note all components except tires, wear items, maintenance. Safety Restraint Coverage – 5 years/50,000 miles Corrosion Note perforation of sheet metal panels – 3 years/36,000 miles for corrosion that does not cause holes in sheetmetal.

Where can I get roadside assistance for MY 1997 Ford Explorer?

Roadside Assistance Note Roadside Assistance Program 1-800-241-FORD (3673) – includes – towing, changing a flat tire, jump starting a dead battery, lockout service, fuel delivery. Looking for other models of the Ford Explorer?

What kind of transmission does a Ford Escape have?

Ford Edge, Ford Explorer, Lincoln MKX, Lincoln MKS, Ford Taurus, Ford Flex, Lincoln MKT, Lincoln MKZ (2010-Present) 2009–present 6F35 —6-speed transaxle, Van Dyke Transmission. Ford Escape, Ford Fusion, Ford Focus, Ford C-Max, Ford Kuga (in the Focus, C-Max and Kuga it is used with the 1.5 L4 Ecoboost.

What kind of transmission does a Ford Windstar have?

FORD LOOK-UP TABLE Model Years Transmission Type Engine Type/Size Remarks Van 1983-1993 Van 1989 – Up Van 1994 – Up WINDSTAR 2001-2003 4 SP FWD V6 3.8L AX4N

How much does it cost to fix a Ford Explorer transmission failure?

The transmission failure is most commonly fixed by replacing with a rebuilt transmission, replacing the transmission completely, or recalling the transmission. The average range of repairs is between $1,800 and $3,400, and typically occurs at an average of 94,800 miles.

Are there any problems with the Ford Explorer?

The 2002 Ford Explorer had the highest number of problems and complaints associated with any Ford Explorer model. The main issues deal with the faulty and damaged transmission, causing the Ford Explorer to undergo serious problems that need to be fixed in order for your car to continue running smoothly.

How many generations of the Ford Explorer are there?

Ford has produced six generations of the Explorer, with the newest version unveiling at the very beginning of 2019. The 2002 Ford Explorer had the most overall complaints, with an astronomically-high number compared to the surrounding years.

Can you change the transmission on a Ford Explorer?

Select your Year, Make, Model and Engine to find those that fit your vehicle. Highly functional and full of plenty of room for the whole family, your Ford Explorer delivers when you need it to most. Make sure that trend continues by swapping out that faulty transmission in favor of a new automatic transmission for Ford Explorer from AutoZone.

The transmission failure is most commonly fixed by replacing with a rebuilt transmission, replacing the transmission completely, or recalling the transmission. The average range of repairs is between $1,800 and $3,400, and typically occurs at an average of 94,800 miles.

How does the 4 wheel drive work on a Ford Explorer?

Also to know is, how does 4wd work on Ford Explorer? 2017 Ford Explorer Intelligent 4WD and Terrain Management System. In a traditional four-wheel drive system, the driver engages a four-high or four-low setting with either manual locking hubs or electronic shift on the fly.

Are there any used Ford Explorers for sale?

Autotrader has 15,278 Used Ford Explorers for sale, including a 2020 Ford Explorer 4WD Platinum, a 2020 Ford Explorer 4WD ST, and a 2021 Ford Explorer 4WD Platinum. Not sure if an Explorer is the right fit for you?

For 2000, Ford added flex-fuel capability to the Explorer for the first time. A Mazda-produced 5-speed manual was standard with the 4.0L OHV V6 engine; the SOHC V6 was not offered with a manual transmission until 2000, receiving a heavier-duty version of the Mazda-sourced 5-speed.

When did the second generation Ford Explorer come out?

The second-generation Ford Explorer made its debut in late 1994 as a 1995 model. Retaining the same footprint as its predecessor, the 1995 Ford Explorer underwent extensive modifications to its chassis to improve its road manners.

Ford Edge, Ford Explorer, Lincoln MKX, Lincoln MKS, Ford Taurus, Ford Flex, Lincoln MKT, Lincoln MKZ (2010-Present) 2009–present 6F35 —6-speed transaxle, Van Dyke Transmission. Ford Escape, Ford Fusion, Ford Focus, Ford C-Max, Ford Kuga (in the Focus, C-Max and Kuga it is used with the 1.5 L4 Ecoboost.

What kind of transmission does a Ford Type E have?

1968- Ford Type E (aka Built or 2000e) 4-speed transmission Came in Anglia 105E, Cortina MkI, Lotus Cortina MkI, Cortina MkII to up to ’68, Consul Classic, Consul Capri, Corsair, Escort TC, Mexico Mk1 and RS1600 MkI. Tremec T-170/T-175/T176/T177 1984-1990+?

Where can I get a Ford Explorer build sheet?

The VIN also allows a user to get a build sheet of Ford EXPLORER. Please check Ford EXPLORER car parts catalog for additional information if you’re looking for parts to repair your vehicle. You can search Ford EXPLORER parts by VIN number . It is possible to get market price of new or used Ford EXPLORER by VIN number.

Where can I find parts for my Ford Explorer?

Please check Ford EXPLORER car parts catalog for additional information if you’re looking for parts to repair your vehicle. You can search Ford EXPLORER parts by VIN number . It is possible to get market price of new or used Ford EXPLORER by VIN number. Every buyer must check Ford EXPLORER car history before getting a car loan or credit.

Where can I find the VIN on my Ford Explorer?

The VIN also allows a user to get a build sheet of Ford EXPLORER. Please check Ford EXPLORER car parts catalog for additional information if you’re looking for parts to repair your vehicle. You can search Ford EXPLORER parts by VIN number. It is possible to get market price of new or used Ford EXPLORER by VIN number.

The VIN also allows a user to get a build sheet of Ford EXPLORER. Please check Ford EXPLORER car parts catalog for additional information if you’re looking for parts to repair your vehicle. You can search Ford EXPLORER parts by VIN number . It is possible to get market price of new or used Ford EXPLORER by VIN number.

Please check Ford EXPLORER car parts catalog for additional information if you’re looking for parts to repair your vehicle. You can search Ford EXPLORER parts by VIN number . It is possible to get market price of new or used Ford EXPLORER by VIN number. Every buyer must check Ford EXPLORER car history before getting a car loan or credit.

The VIN also allows a user to get a build sheet of Ford EXPLORER. Please check Ford EXPLORER car parts catalog for additional information if you’re looking for parts to repair your vehicle. You can search Ford EXPLORER parts by VIN number. It is possible to get market price of new or used Ford EXPLORER by VIN number.

When was the 4R55E replaced by the 5R44E?

The 4R55E was short-lived however as it was replaced in all instances where it was used with the newer 5R55E during the 1997 model year. The 4R44E continued on through the end of the 1990’s before being replaced by the 5R44E (5R55E’s relative).

What causes no 2nd gear on Ford 4R55E?

A low reading means that there is most likely a short in the internal wiring and no reading means the wire is broken. In either case, the solenoid will need to be replaced with a new one. 2) No 2nd or 4th gear: This is often caused by the solenoid regulator valve being out of position.


What do you need to know about Jasper remanufactured transmissions?

But you can relax. JASPER’s remanufactured automatic and standard transmissions are designed for your peace of mind. You don’t have to worry about your bill growing as more and more parts need to be machined or replaced. You don’t have to comb the junkyards for a used transmission, or trust your fate to a 30 day warranty transmission.

Is there warranty on a remanufactured transmission?

You don’t have to worry about your bill growing as more and more parts need to be machined or replaced. You don’t have to comb the junkyards for a used transmission, or trust your fate to a 30 day warranty transmission. Instead, you can purchase a completely reman JASPER transmission and get back on the road worry-free.

What’s the warranty on a rebuilt Ford transmission?

A re-manufactured transmission also comes with a much better warranty: three years compared to 90 days for a rebuilt transmission. The valve body gaskets on these transmissions are known to decay and blow out. CLICK HERE for more information.

What kind of engine does Ford Explorer have?

CARFAX Canada No Reported Accidents CARFAX Canada One OwnerShadow Black 2018 Explorer Platinum 600a 6-Speed Automatic with Select-Shift 4WD 3.5L V6 Air Conditioning Cruise Control, Equipment Group 600A, Front fog lights, Heated door mirrors, Navigation System, Power door mirro…

Is the Ford Explorer a Class 3 trailer?

Leather Seats, Sunroof, Class III Trailer Tow Package! This 2021 Explorer is ready to change the game. The 2021 Ford Explorer has better style, more power, and more luxury than ever before, making this generation of Explorers an instant classic. With impressive tow…

What’s the price of a new Ford Explorer?

ONE LOW PRICE, EVERY VEHICLE, EVERY DAY !, Bluetooth… College Ford Lincoln proudly display our 2021 Ford Explorer XLT from our pre-owned inventory

The second generation Ford Explorer model, manufactured from 1995 to 2001, offered the XL, XLT, Eddie Bauer, Limited and Sport trims and featured three engine options. An additional Ford Explorer North Face model was available only to the United Kingdom.

Where can I find used Ford Explorer parts?

Find Your Used Auto Parts Right NOW! To find your Ford Explorer part from a RECYCLER NEAR YOU, just enter the YEAR and PART TYPE you wish to locate and your ZIP code in the above form and press the “FIND” button. The Ford Explorer was introduced by the Ford Motor Company in 1990.

What kind of transmission does a Ford truck have?

As of 2011 only transmission (manual or automatic) available in Ford Super Duty trucks. This transmission is the subject of a massive number of lawsuits alleging Ford lied in order to sell cars Ford knew had defective transmissions. 2013-present HF35 Hybrid and Plug in Hybrid transaxle.

1968- Ford Type E (aka Built or 2000e) 4-speed transmission Came in Anglia 105E, Cortina MkI, Lotus Cortina MkI, Cortina MkII to up to ’68, Consul Classic, Consul Capri, Corsair, Escort TC, Mexico Mk1 and RS1600 MkI. Tremec T-170/T-175/T176/T177 1984-1990+?

Newer model years have mostly fixed these faults, but they can still run into problems like hard shifting in the 2020 Ford Explorer. Fixing serious transmission problems can cost you thousands of dollars.

Where can I buy replacement parts for my Ford Explorer?

With more than one brand manufacturing replacement and performance parts for your Ford Explorer, you’ll have plenty of budget-friendly options to choose from. Here at CarParts.com, you can browse a wide variety of aftermarket Ford Explorer parts and find products that work with your SUV and your budget.

Is the Ford Explorer a good car to drive?

The Explorer is a reliable model, but it has its share of issues that varies between model years. Some drivers report smelling exhaust fumes while inside the cabin. Others complain about their engine losing power or stalling on the road.

What kind of transmission does a Willys 4×4 have?

Compatible with Willy’s I4 & I6 Engines. Iron case and top cover. Close-ratio first gear with direct-drive in third-gear. Fairly strong and extremely compact. Compatible with the Dana 18 and easily adaptable to the Dana 20. 1946-1971 Jeeps. Variations – 4/6Cyl. Side/Column & Floor/Tower Shift (Shown – 4Cyl. tower shift)

When did the Woody C6 transmission come out?

The C6 was available from 1966-96 and came be found in the following vehicles – Bronco, F-Series, Fairlaine, LTD (I & II), Ranchero, TBird, Torino, Comet, Couger, Meteor, and Montego. Extremely heavy. Weighing in at 200+ pounds.

How can I tell if my Ford Explorer transmission is failing?

The transmission failure in your Ford can be noticed by the car jumping gears without warning, slipping in and out of gears while you’re driving, or preventing you from going into any gear. These are all signs that your transmission has failed, or is currently failing.

The 2002 Ford Explorer had the highest number of problems and complaints associated with any Ford Explorer model. The main issues deal with the faulty and damaged transmission, causing the Ford Explorer to undergo serious problems that need to be fixed in order for your car to continue running smoothly.

As of 2011 only transmission (manual or automatic) available in Ford Super Duty trucks. This transmission is the subject of a massive number of lawsuits alleging Ford lied in order to sell cars Ford knew had defective transmissions. 2013-present HF35 Hybrid and Plug in Hybrid transaxle.

What kind of transmission problem does Ford Explorer have?

290-horsepower 3.5L V6 6-speed shiftable automatic AWD Rear differential was leaking fluid. Dealer replaced the vent with an updated part per a TSB. Transmission fluid cap is covered in fluid. Dealer reports levels are good and this is normal. Transfer case PTU Assembly leaking. Replaced. Drive shaft seal leaking.

Why is my Ford Explorer not shifting gears?

The Explorer started displaying problems with its solenoids in the 5R55W at only a few thousand miles. If the solenoids did fail, the transmission would not shift gears and the torque converter wouldn’t operate. Although replacing the solenoid is not as expensive, it can be dangerous if it fails while driving on the highway.

Why was the Ford Explorer introduced in 2002?

Its launch marked a new era for SUV vehicles since they were only preferred for use on rough terrains and off-road. However, the Explorer proved that SUVs can be useful for everyday purposes, making it one of the popular vehicles that year. The 2002 Ford Explorer was introduced in two variants.

What kind of transmission does a 2002 Ford Explorer have?

The 2002 Ford Explorer was introduced in two variants. The first version was the 4.6-liter V-type with eight cylinders and the second version was the 4.0-liter V-6. Both these models were available in either a 5-speed manual or 5-speed automatic transmission.

How much does it cost to replace a transmission on a Ford Explorer?

Dealer quoted $3,700 to replace transmission. Took car to transmission repair shop where they replaced solenoid assembly for $675. Updated firmware controlling transmission to eliminate jerking experienced when shifting under load. Update was successful in eliminating problem.

What are the problems with the Ford Explorer?

Gear selector sensor not reporting that the vehicle was placed in park. 290-horsepower 3.5L V6 6-speed shiftable automatic FWD Car wouldn’t recognize when it was in Park, so it wouldn’t fully shut off.

The Explorer started displaying problems with its solenoids in the 5R55W at only a few thousand miles. If the solenoids did fail, the transmission would not shift gears and the torque converter wouldn’t operate. Although replacing the solenoid is not as expensive, it can be dangerous if it fails while driving on the highway.

Is there a 4 door version of the Ford Explorer?

In an effort to attract family buyers, a four-door version was developed alongside the two-door (launched the same month as the four-door S-10 Blazer). As with the Ford Bronco II, the first-generation Ford Explorer shares its chassis and underpinnings with the first-generation (1983-1992) Ford Ranger.

In an effort to attract family buyers, a four-door version was developed alongside the two-door (launched the same month as the four-door S-10 Blazer). As with the Ford Bronco II, the first-generation Ford Explorer shares its chassis and underpinnings with the first-generation (1983-1992) Ford Ranger.

The second-generation Ford Explorer made its debut in late 1994 as a 1995 model. Retaining the same footprint as its predecessor, the 1995 Ford Explorer underwent extensive modifications to its chassis to improve its road manners.

In early 2000, the Ford Explorer Sport Trac was introduced, which was a mid-size pickup truck; offered with a crew cab with a short pickup bed, the Sport Trac was based on the five-door Explorer. The Explorer Sport Trac was produced through the 2005 model year (until it was redesigned for 2007).

What are the common problems with Ford Explorers?

Common Issues. The most common transmission problem found in 2002 Ford Explorers is outright failure. Symptoms of a transmission failure include a blinking O/D light, slipping gears, difficulty shifting or rapid deceleration of the vehicle.

How much does it cost to replace the solenoid on a Ford Explorer?

Consumers report higher-than-usual RPMs being required to shift the vehicle from first to second gear, followed shortly by slippage and total failure. Often, only the solenoid will need to be replaced, but this repair can still cost upwards of $700. Check if your vehicle is still under warranty.

What are the symptoms of a Ford Explorer transmission failure?

Symptoms of a transmission failure include a blinking O/D light, slipping gears, difficulty shifting or rapid deceleration of the vehicle. Many consumers report a transmission failure occurring with their Ford Explorer after only 50,000 or fewer miles of normal driving.

In early 2000, the Ford Explorer Sport Trac was introduced, which was a mid-size pickup truck; offered with a crew cab with a short pickup bed, the Sport Trac was based on the five-door Explorer. The Explorer Sport Trac was produced through the 2005 model year (until it was redesigned for 2007).

Where did the 2003 Ford Explorer come from?

No accident or damage reported to CARFAX. 1st owner purchased on 04/26/03 and owned in PA until 03/29/12 • 2nd owner purchased on 03/29/12 and owned in PA until 07/14/16 • 3rd owner purchased on 07/14/16 and owned in PA until .

Ford Mercon V is the fluid required for this transmission. In this video I show you how to fill and adjust the 5R55S after a repair that has required a fluid drain or loss. If you follow this procedure you will have no issues with the proper fill level of the 5R55S.

When was the last time I serviced my Ford Explorer?

No accident or damage reported to CARFAX. Purchased on 08/14/03 and owned in FL until 05/05/21. Driven an estimated 5,867 miles/year. Last serviced at 104,080 miles in Orlando, FL on 05/10/21 • Vehicle serviced • Pre-delivery inspection completed.

When did the third generation Ford Explorer come out?

The third-generation Ford Explorer was marketed by all three divisions of Ford Motor Company: by Mercury as the second-generation Mercury Mountaineer; Lincoln marketed the third-generation Explorer from 2002 to 2005 as the Lincoln Aviator.

Is there a service manual for a Ford Explorer?

FORD EXPLORER SERVICE & REPAIR MANUAL (2000 2001 2002 2003 2004 2005) – DOWNLOAD! FORD VEHICLES 2000-2004 ALL MODELS FACTORY SERVICE MANUALS (Free Preview, Total 5.4GB, Searchable Bookmarked PDFs, Original FSM Contains Everything You Will Need To Repair Maintain Your Vehicle!)

What kind of engine does a 1997 Ford Explorer have?

AutoCheck Vehicle History Summary Unavailable. Description: Used 1997 Ford Explorer XLT with AWD/4WD. 1997 Ford Explorer Eddie Bauer 4×4 in PLUM with 142,000 Miles! This Ford Explorer Eddie Bauer comes with a 4.0L V-6 Engine, Leather interior & a Moonroof!

Meanwhile, the blue oval was adding a new pickup truck variant called the Explorer Sport Trac with four doors, a 14.3-inch longer wheelbase and a 4.2-foot, composite truck bed. When it came to sales, these were the Explorer’s glory days. At the beginning of the second generation, the SUV registered 395,227 deliveries for 1995.

What kind of differential does a Ford Explorer have?

All Explorers were equipped with the Ford 8.8 axle in either a limited slip differential, or open version with a variety of available gear ratios. Four-wheel-drive front axles were the TTB (” Twin Traction Beam “) Dana 35 with some Dana 44-spec components.

Where was the 2004 Ford Explorer XLT purchased?

No accident or damage reported to CARFAX. 1st owner purchased on 02/15/05 and owned in DE until 03/18/09 • 2nd owner purchased on 06/25/09 and owned in PA until 05/09/13 • 3rd owner purchased on 05/27/13 and owned in PA until .

Is the Ford Explorer still available for sale?

None for sale nearby. Instead: We bought our Explorer new, having owned both generations prior. This is by-far our favorite, and still sits in our driveway next to our 2007 Explorer today. We use ours for a daily driver and could not ask for a better vehicle given our needs.

Where can I find a 1995 Ford Explorer?

Description: Used 1995 Ford Explorer Eddie Bauer with 5000lb Towing Capacity. Located 148 miles away from Moses Lake, WA

What kind of engine does a 1996 Ford Explorer have?

Whether they’re male or female, 18 or 80, every guest will always get the same low price.1996 Ford Explorer 5.0L V8 SFI 4WD5.0L V8 SFI, 4WD.1996 Ford Explorer Description: Used 1996 Ford Explorer with AWD/4WD.

Is the 1998 Ford Explorer a gas saving SUV?

Put down the mouse because this handsome 1998 Ford Explorer is the gas-saving SUV you’ve been hunting for. Lots of get-up-and-go for an outstanding price in this so-much-fun to drive Explorer. Contemporary Automotive handling your transportation needs in Alabama & Mississippi for over 40 years !!!

Description: Used 1995 Ford Explorer Eddie Bauer with 5000lb Towing Capacity. Located 148 miles away from Moses Lake, WA

Whether they’re male or female, 18 or 80, every guest will always get the same low price.1996 Ford Explorer 5.0L V8 SFI 4WD5.0L V8 SFI, 4WD.1996 Ford Explorer Description: Used 1996 Ford Explorer with AWD/4WD.

Put down the mouse because this handsome 1998 Ford Explorer is the gas-saving SUV you’ve been hunting for. Lots of get-up-and-go for an outstanding price in this so-much-fun to drive Explorer. Contemporary Automotive handling your transportation needs in Alabama & Mississippi for over 40 years !!!

How many miles does a 1999 Ford Explorer drive?

1st owner drove an estimated 22,142 miles/year • 2nd owner drove an estimated 13,540 miles/year • 3rd owner drove an estimated 2,649 miles/year.

Where was the 1999 Ford Explorer last serviced?

Purchased on 05/29/99 and owned in CA until 05/29/21. Driven an estimated 7,239 miles/year. Last serviced at 157,127 miles in Big Rapids, MI on 06/16/20 • Vehicle serviced • Antifreeze/coolant flushed/changed • Air filter replaced • Oil and filter changed. No accident or damage reported to CARFAX.

What’s the gas mileage on a 1999 Ford Explorer?

Gas mileage averages 18.4 city and highway. For some reason, some car critics slam the explorer, but mine has been a darn good car overall. Was this review helpful? (12) (0) 2nd vehicle and loving it! Got my 99 explorer in febuary of 2013 with only 97**** miles and now towards the end of 2015 with 104*** still running strong with the 5.0 engine.

Can a Ford Explorer be repaired with automatic transmission?

In either case, an Explorer automatic transmission repair is what you need to restore it to premium working order. Shop AutoZone’s line of Ford Explorer automatic transmission parts today and in addition to a smoother ride, enjoy access to trustworthy advice provided by our helpful staff.

Which is the most reliable 1999 Ford Explorer?

Check back with us soon. Showing 3 of 1,193 reviews. Most Reliable Vehicle! We bought this for $2K as a 2nd “beater” car for my hubby to drive to work until we could afford something better. Man were we surprised when this one turned out to be our most reliable family vehicle!

Where can I buy a 1996 Ford Explorer?

Find the best deal on a Ford Explorer today. There are for sale near you. Certified child passenger safety technicians conduct hands-on tests of a car’s Latch system and check the vehicle’s ability to accommodate different types of car seats. The Explorer received the following grades on a scale of A-F.*

What are the different types of Ford Transmissions?

1 4.2L, 4.6L, & 5.4L (2v & 3v) F150 Ford E-Series Van Ford Expedition 2 Ford Panther platform 3 Ford Crown Victoria 4 Mercury Grand Marquis 5 Lincoln Town Car 6 Ford Mustang (GT and Mach 1) 7 Mercury Marauder 8 Ford Police Interceptor

Are there any Ford 4.0L engines for sale?

Product Shipping Ford 4.0L Engine 1990-1991 Aerostar, Ran FREE Ford 4.0L Engine 1990-1991 Aerostar, Ran FREE Ford 4.0L Engine 1991 Explorer M/T Befor FREE Ford 4.0L Engine 1991-1992 Ranger, Explo FREE

What do you get when you buy a Ford transmission?

When you purchase a Ford remanufactured transmission assembly, you’re getting a product that’s built to the exacting specifications of Ford Motor Company – one that’s built for your vehicle.

What to do about a worn servo bore on a Ford Explorer?

MOST COMMON FORD EXPLORER TRANSMISSION PROBLEM (WORN BORES)! [U.S. Patent No. 9,121,418] Up until our kit was available, the only available fix for a worn servo bore on the Ford 5R55W, 5R55N, and the 5R55S transmissions was to have the bores bored out and sleeved. This obviously involves dropping the transmission.

This is a demo – You can edit the text! ? Type in the visual editor on the left or the source editor on the right and see them both change in real time. Set up the cleaning preferences below and click the Clean HTML button to clean the HTML source code.

Why does my Ford Ranger have no reverse?

Either the bore in which the intermediate servo pin rides in is worn out, or the spring on the intermediate servo piston is too strong. 6) No reverse: If the transmission has no reverse you most likely have a bad SSA solenoid. 7) Delay going into reverse of a forward gear: Has the valve body been removed recently for any reason?

How much does a remanufactured transmission cost Ford?

Plus, Ford remanufactured transmissions use new Ford-engineered service parts in the remanufacturing process, come equipped with sensors, and contain the proper transmission fluid, helping to make installation easy. MSRP: $2,880.00 Core Charge: $1,000.00

How long is the warranty on a Ford transmission?

Five Year, Unlimited Mileage Warranty Included! Transmissions and Transfer Cases Get a Free, No Obligation Price-Quote Today! WHAT TYPE OF PRODUCT ARE YOU LOOKING FOR?

How to get a free Ford Ranger engine?

Choose One Today 2-3 Days 1 Week 1 Month Just Looking Send My Free Quote! Best customer service I’ve ever experienced! Knowledgeable, friendly, and accommodating. If you need an engine, this is the place for you!!

When you purchase a Ford remanufactured transmission assembly, you’re getting a product that’s built to the exacting specifications of Ford Motor Company – one that’s built for your vehicle.

Who are the remanufactured and rebuilt Ford Transmissions?

Remanufactured & Rebuilt Ford Transmissions. See some of the reviews here. Very helpful service…. Very helpful service…. So far so good. Luis helped me out and was very helpful.

What was the first 4 speed automatic transmission?

1980–1993 AOD —Ford’s first 4-speed automatic transmission, based on the FMX but with a torque-splitting feature. Ford Contour, Ford Escape, Ford Mondeo, Ford Probe, Mercury Cougar, Mercury Mariner, Mercury Mystique, Mazda Tribute, Mazda 626.

Plus, Ford remanufactured transmissions use new Ford-engineered service parts in the remanufacturing process, come equipped with sensors, and contain the proper transmission fluid, helping to make installation easy. MSRP: $2,880.00 Core Charge: $1,000.00

When did the 5R55 E transmission come out?

The 5R55E featured more precise computer controls (necessary to accommodate the additional forward gear) and introduced with a sophisticated friction-to-friction shift ability. Following the original “E” series of the transmission introduced in the 1997 model year, other variants of the 5R55 transmission appeared.

What’s the difference between a 5R55S and 5R 55W?

Mostly specific difference between 5R55W (wide shift) and 5R55S (synchronic shift) is a different overdrive planet gear ratio. Entry-level models of the 2008 Ford FG Falcon were the newest recipients of the 5R55 transmission.

The 5R55E featured more precise computer controls (necessary to accommodate the additional forward gear) and introduced with a sophisticated friction-to-friction shift ability. Following the original “E” series of the transmission introduced in the 1997 model year, other variants of the 5R55 transmission appeared.

The 4R55E was short-lived however as it was replaced in all instances where it was used with the newer 5R55E during the 1997 model year. The 4R44E continued on through the end of the 1990’s before being replaced by the 5R44E (5R55E’s relative).

Mostly specific difference between 5R55W (wide shift) and 5R55S (synchronic shift) is a different overdrive planet gear ratio. Entry-level models of the 2008 Ford FG Falcon were the newest recipients of the 5R55 transmission.

Please find below all the cleaning preferences, the Find And Replace tool, the Lorem-ipsum generator, the Case Converter and much more! Don’t forget to save this link into your bookmarks and share it with your friends.

1997-2001 Ford Explorer 5.0L GT40P lower intake on the left, and a 1995-1997 Ford Explorer 5.0L GT40 lower intake on the right: 1997-2001 Ford Ranger 5.0L GT40P lower intake top view: The 1997-2001 Ford Explorer 5.0L came as either a 2WD, or AWD. The AWD came with a BW4404 transfer case.

When did the Ford Explorer get a V8?

This page is going to talk solely about the engine itself. Ford introduced the 5.0L V8 as an option for the Explorer in 1996. It was only available in the 2wd models that first year, and had 210 hp and 280 ft-lb of torque. For 1997, revised cylinder heads increased output of the 5.0L V8 to 215 hp.

What kind of transfer case does Ford Explorer 5.0L have?

The 1997-2001 Ford Explorer 5.0L came as either a 2WD, or AWD. The AWD came with a BW4404 transfer case. This is not the traditional transfer case that allows you to select 2WD / 4HI / 4LO. The BW4404 is a chain driven part-time transfer case that offers torque on demand through a viscous coupling.

What causes no reverse on a 4R44E transmission?

Loss of certain gears can occur due to issues in at least two other circuits. Loss of solenoid oil due to end plug leakage can cause no Reverse, and loss or 3rd or 4th and can be repaired with 37947-13K.

What kind of transmission does a Ford Ranger use?

The 4R44E was used in lighter-duty applications, namely with 4-cylinder or 3.0 L V6 models of the Ford Ranger pickup, while the 4R55E was used in heavier-duty applications, specifically with the 4.0 L Cologne V6 used in vehicles like the said Ford Ranger or Ford Explorer.

A low reading means that there is most likely a short in the internal wiring and no reading means the wire is broken. In either case, the solenoid will need to be replaced with a new one. 2) No 2nd or 4th gear: This is often caused by the solenoid regulator valve being out of position.

How many gears does a Ford 4R44E have?

The name 4R44E means 4 forward gears, rear-drive platform (or 4WD, with a different tailshaft housing), rated for 440 ft/lb torque (after torque converter multiplication) and electronic shifting. 4R55E is the same but heavier duty and rated for 550 ft·lbs.

Author Image
Ruth Doyle