How do I find the remote wire for my amp?
How do I find the remote wire for my amp?
The turn-on wire (also called the remote wire) is located behind the stereo. On aftermarket stereos, it’s usually a blue and white wire. The remote wire will “tell” your amplifier to turn on whenever the stereo is powered up (usually, whenever the vehicle is turned on).
How do you connect a remote turn on wire?
Simply connect another piece of blue primary wire to the blue wire in the wiring harness and run the primary wire back to the amplifier to terminate in the remote turn on terminal. To connect wire to wire, an appropriately sized butt connector or other style connector can be used.
What happens when the remote turn on wire is turned off?
When the ignition of the vehicle is turned off, the remote turn on wire stops transferring voltage and the amplifier turns off. If the remote turn on wire is connected to a wire in the vehicle that has constant voltage, the amplifier will always be on.
Where does the remote turn on signal come from?
Since a stock/factory radio doesn’t have a remote turn on output like an aftermarket head unit, the voltage turn on signal has to come from the factory electrical system. The remote turn on wire must be connected to part of the vehicle’s electrical system that only turns on when the ignition is in the ACCESSORY or ON position.
How can I detect a remote access to my computer?
Malware is typically the easiest way for hackers to infiltrate your personal computer. If you don’t have an antivirus, download an installer on another computer and transfer it to your computer via USB. Install the antivirus and then run a scan with it.
Where to hook up a remote wire?
If you can’t find a remote wire from the HU, You can use a switch. to wire a switch to your amp you need wire the 12+ Connection on your amp to the remote on your amp. If there is a blue wire on your HU Use that as your Remote Wire.
Can you turn on an amp without a remote wire?
Watch as Allyn of Sonic Electronix explains how to turn on your amp if you have a factory stereo without remote wire. He suggests other accessories you can use to turn on the amp with a stock stereo. Sonic Electronix always strives to be the premiere online shopping destination for car electronics and other consumer electronics.
What kind of wire is a remote turn on wire?
One thing to note, most head unit wiring harnesses also have a solid blue wire. This wire is typically for power antenna or factory amplifier turn on, do not get this wire confused with the remote turn on wire with the blue/white stripe.
How do you splice a remote turn on wire?
Since the factory wire is already terminated on both ends, splicing into the wire is necessary. Use a T-tap connector or cut the factory wire to splice into the wire by twisting the remote turn on wire together with one end of the factory wire, then crimp on a butt connector.
