Other

How do you reset the anti-theft on a 2008 Ford Focus?

How do you reset the anti-theft on a 2008 Ford Focus?

To perform the 2008 Ford Focus anti-theft reset make sure Your car is locked. Next activate the SecuriLock system by pressing the “Lock” button twice on Your key fob. The horn will sound, confirming system activation.

How to reset the anti theft system in a Ford?

1 Insert the key into the ignition and turn it on to the position where the accessories are activated but not the engine. 2 Leave the key in this position for at least 10 minutes. 3 Check the anti-theft light again. 4 Now try to start the engine. 5 Repeat the process at least a couple of times if it does not work the first time.

Where is the anti theft light on a Ford?

The display of the car behind the steering will light up and will show the anti-theft light blinking or constantly lit. Leave the key in this position for at least 10 minutes. Check the anti-theft light again.

When does the anti theft system car wont start?

If the engine does not respond or dies immediately after cranking up, leave the key in that position for 10 minutes. When the security light goes off, turn the ignition off, wait 20 seconds, and then start the engine. These are the most popular ways to solve the problem of anti theft system car wont start.

What to do if your anti theft light won’t turn on?

If this is some other type of light then disconnect your battery (negative first then positive) for 30 minutes and reconnect in reverse order (positive then negative). This should reset the computer. You will loose presets in your radio.

1 Insert the key into the ignition and turn it on to the position where the accessories are activated but not the engine. 2 Leave the key in this position for at least 10 minutes. 3 Check the anti-theft light again. 4 Now try to start the engine. 5 Repeat the process at least a couple of times if it does not work the first time.

The display of the car behind the steering will light up and will show the anti-theft light blinking or constantly lit. Leave the key in this position for at least 10 minutes. Check the anti-theft light again.

Why does my 2008 Ford Escape not start?

Hi Ben, my 2008 Ford Escape takes about 30 times of turning the key in the ignition to start. This started out less severe as last week I would turn the key, the battery would turn on, but not start, but the second time I pulled it out, pushed it in (the anti theft system requires you to push the key in and turn) and turned it, it would start.

Is the anti theft light blinking on my Ford F450?

Re: Anti theft lite on 08 f450 truck will not turn over,… I have a 2008 ford f550 super duty with the anti theft light blinking it blinks fast for about 2 mins then slows and blinks once then six time at about once a sec. Any help plz

Author Image
Ruth Doyle
Easy tips

How do you reset the anti theft on a 2008 Ford Focus?

How do you reset the anti theft on a 2008 Ford Focus?

To perform the 2008 Ford Focus anti-theft reset make sure Your car is locked. Next activate the SecuriLock system by pressing the “Lock” button twice on Your key fob. The horn will sound, confirming system activation.

How do you reset a SecuriLock system in a Ford?

Enter your vehicle with your ignition key and remote and insert your key into the ignition. Turn the ignition key from “Off” to “Run” eight times in the first 10 seconds, and end the eighth turn in the “Run” position.

How long does it take to reset SecuriLock system?

Wait for the locks to click after the eighth cycle and press and hold any button on your remote within 30 seconds. Hold the button for up to 30 seconds until the locks automatically click again, and this will indicate successful reprogramming.

What can I do with my SecuriLock remote?

With your Securilock system, you can unlock your doors without fumbling with your keys, sound the panic alarm in a dark street or parking lot and pop the trunk with your hands full. You can set or reset the remotes from your driver’s seat in a few easy minutes with no professional equipment or experience.

How often do you turn the ignition key on and off?

Turn the ignition key from “Off” to “Run” eight times in the first 10 seconds, and end the eighth turn in the “Run” position. Wait for the locks to click after the eighth cycle and press and hold any button on your remote within 30 seconds.

How does SecuriLock work on a Ford Focus?

by Alex Smith. All Ford Focus models are equipped with SecuriLock, which is Ford’s passive anti-theft system. Each car is sold with two electronic keys (three if your car has the valet feature) that are specially coded to work with the vehicle. The car will not start without using the proper coded key, partly to deter car thieves.

Why does my Ford Focus not start without a key?

The car will not start without using the proper coded key, partly to deter car thieves. However, sometimes the system engages when the rightful owner tries to start the car. If this happens, there are a few things you should troubleshoot before calling a dealer for repairs.

Why is my SecuriLock key not working on my car?

If it has been crushed or bent in any way, the chip within the key may no longer be functional. Even though it is an authorized key, the SecuriLock system will not recognize it. Check the ignition lock on the steering console for damage or evidence of tampering.

Where is the anti theft light on a Ford?

The display of the car behind the steering will light up and will show the anti-theft light blinking or constantly lit. Leave the key in this position for at least 10 minutes. Check the anti-theft light again.

Author Image
Ruth Doyle