Is there a problem with my Ford Ranger?

My beloved standard, 2000 Ford Ranger, with an estimated 170,000 miles on it, has a problem with stalling that keeps getting worse. 2 different garages have failed to fix this problem three times.

What kind of truck is 2007 Ford Ranger?

2007 Ford Ranger Sport turns heads on the road, track and even trails! First of all I would like to start off by saying The 2007 Ford Ranger Sport is the most versatile truck I’ve ever owned. The Sport Edition makes it compatible for everyday use as well as off road, and track use.

What to do when your Ranger shuts off?

2011 Ranger 800 XP high output EFI. Driving along, temp 195 degrees and it just stops running, no warning, no backfire, just like turning off the key. Stop the Ranger, turn off the key, press the brake pedal, wait until the fuel pump builds pressure, and it starts, good power and acceleration.

Is the Ford Ranger XLT a good truck?

A sleek looking midsize truck that you can do just about anything with. Overall, the 2007 Ford Ranger Sport deserves a 5/5 review. It is a very reliable truck and can be easily fit in to anyone’s lifestyle. I just recently bought my 2007 ford ranger xlt, and overall I am pleased with it.

My beloved standard, 2000 Ford Ranger, with an estimated 170,000 miles on it, has a problem with stalling that keeps getting worse. 2 different garages have failed to fix this problem three times.

Which is the best Ford Ranger to buy?

One of the best-selling midsize pickup trucks on the market today, the Ford Ranger is loaded with features, and there are three trim levels to choose from. The base truck is the Ford Ranger XL, which offers a nice balance of value and performance.

Iv got 98 4 cly 5 speed and it idles high air idle was replaced there doesn’t seem to be vac leak iv thought about it being the speed sencer or tps is there any hope or should I take it out back and do her ol yealler style 2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k . (6/5,2014) (SOLD).

What does the MAF sensor on a Ford Ranger do?

A MAF sensor measures the density of the air entering the intake manifold. It passes this information onto your Ranger’s ECU. The ECU uses this information along with other sensor data to control the amount of fuel that enters the combustion chamber. If you do determine that you need a new mass airflow sensor, they aren’t too expensive.

What happens when the fuel pump fails in a Ford Ranger?

When the internal parts/seals fail–they allow fuel to be dropped into the intake. Makes for extremely rich running, rotten economy, etc.. It’s a place to start. That and doing an actually fuel pressure test will show what the pump is..or is not doing.

Why does my Ford Ranger Idle at 0%?

Changed the Idle Air Control Unit with no changes. Computer thinks all is fine since it’s not putting out any codes. Had a friend perform a diagnosis w/ scanner. When at normal idle (1000) he noticed the IAC reading at 0%. He thought that was odd.

Are there any problems with the 1988 Ford Ranger?

Click on a category below for details. Help? Loading Curious how the 1988 Ranger compares to other years? Check out our Ford Ranger overview to see the most problematic years, worst problems and most recently reported complaints with the Ranger.

Are there any recalls on 2004 Ford Ranger?

The 2004 Ford Ranger models have a total of eight recalls and 462 complaints according to Car Complaints. The issues with this model largely have to do with engine troubles and misfires. One owner of a 2004 Ford Ranger in California experienced engine stalling and misfires.

Why does my Ford Ranger stall all the time?

One of the most common issues your Ford Ranger is likely to develop is a stalling problem. The most challenging part of diagnosing a stalling problem is reproducing the conditions that led to the stall in the first place. Stalls can happen at any time, and it can be incredibly jarring when it does happen.

What are the features of a Ford Ranger?

The Ranger offers athletic hauling and towing and has an engine that’s efficient and powerful, which is what most truck fans are looking for. The Ford Ranger handles well, gets great gas mileage, and has a cozy interior. There are enough features to make truck fans happy, including one of the most user-friendly infotainment systems in its class.

What to do if your Ford Ranger is stalling?

You should be able to unplug the IAC (9F715) with the engine warm and have it remain running at around 550RPM and be able to control the idle otherwise. Make sure the air intake “zip tube” isn’t cracked causing an intermittent bypassing of the MAF sensor. I’ve seen that happen a time or two.

What does off throttle air control do on a Ford Ranger?

When you are off throttle air control is done with an idle air control (IAC) valve. This would be the first thing I’d look at. Do not assume that the error codes that come w/ the check engine light are unrelated no matter what anyone told you. Find out exactly what the error codes are/were and post them.

What kind of transmission does the Ford Ranger have?

The two major versions of this new transmission were the 4R44E and 4R55E. The transmissions are fundamentally similar in design, varying only in the durability of key components based on the type of duty they were to be used for. The 4R44E was used in lighter-duty applications, namely with 4-cylinder or 3.0 L V6 models of the Ford Ranger pickup.

When does Ford Ranger 3.0 clear its self?

Its hard to say when it happens (cold or warm) i believe more warm then anything, it starts acting likes a cylinder is not firing (or more cant tell). it does clear its self after about a minute or two at normal idle, if i rev the engine to 4k – 5k it clears instantly. I have no check engine light or codes, i have checked when it happens.

What kind of fuel does a Ford Ranger XLT use?

Info on truck its a 2001 Ford Ranger XLT with the 3.0 V6 (flex fuel) 158,865 Miles. Fuel filter was also changed 4,212 miles ago (7 Months old), MAF (Mass air flow sensor) is also cleaned regularly with the air filter, so is the IAC ( Idle air control Valve). Any tips or help would be greatly appreciated. Thanks

How old is a 2001 Ford Ranger XLT?

I am getting a little confused..lol. Info on truck its a 2001 Ford Ranger XLT with the 3.0 V6 (flex fuel) 158,865 Miles. Fuel filter was also changed 4,212 miles ago (7 Months old), MAF (Mass air flow sensor) is also cleaned regularly with the air filter, so is the IAC ( Idle air control Valve).

When does Ford Ranger engine hesitate during acceleration?

Ford Ranger Engine hesitates during acceleration Inspection at your home or office. Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM. Our certified mobile mechanics can come to you now. Ford Ranger Engine hesitates during acceleration Inspection costs $89 on average.

Why does my Ford Ranger take so long to start?

It is beginning to get worse, taking longer to start. The temperature doesn’t seem to matter. Once i have started it for the day, it starts fine afterward as long as it doesn’t sit for more than a few hours. I put the engine in this truck from my brothers wrecked 92 explorer, which also had this starting problem.

Is the Ford Ranger 4.0L hard to start?

My beloved, super-dependable 1998 Ranger 4.0L has suddenly become very hard to start and will only run with pressure on the accelerator. It has had a couple of hard start moments over the last few months (temperature independent), but nothing consistent enough to be a clear problem.

When did my Ford Ranger start stalling out?

My problem began about 2 years ago. The truck would only stall out when I first began driving, after about a mile, and only if I was going downhill and was coming to a stop. Then it would putter and choke and ultimately stall out completely.

Why is my Transman not working on my Ford Ranger?

Don’t assume because the trans is not slipping in 1st gear at a dead stop the transmission is trouble-free. Also consider that the transmission could have been abused by the previous owner who then changed the fluid in a forlorn hope that fresh fluid would cure the problem. When it did not, off the truck goes to become someone else’s headache.

How much does it cost to fix a 2000 Ford Ranger?

1 Transmission Failure 2000 Ranger Average Cost to Fix: $2,000 Average Mileage: 80,000 mi 2 Frame Rotting And Cracking 2000 Ranger Average Cost to Fix: $800 Average Mileage: 104,000 mi 3 Dome Light Stays On 2000 Ranger

Why does my Ford Ranger not start when hot?

Random problem has happened about 8 times since new when hot or cold. Usually I lock and unlock car then retry starting again. Just guessing here but the delay of a few mins does let me start successfully. Any ideas?

Can a Ford Ranger start in the morning?

First thing in the morning start with one kick , but if you drive about 7 km and it comes to temperature and you switch the engine off , she will not start again until cooled down

Why does my Ford Ranger engine shut off without warning?

Engine stalls and won’t re-start due to improper activation of the passive anti-theft system (pats) which is faulty. Engine shuts off, no power assist, lights remain functional, anit-theft dashboard light starts to blink.

What was the problem with my 2005 Ford Ranger?

I am the owner of a 2005 Ford Ranger there was a problem with the transmission. It was taken to the dealer after approximately 5 days we were able to pick the Ford up and the transmission was replaced. Shortly after this the vehicle started to shut down while driving for no apparent reason .

I have a ranger with the 2.3L 8 plug, I have seen that many people with the same engine is having a stalling problem and so am I. I have change all the sensors except the pcm or the computer. Been having some problems with rough idle and stalling while sitting still.

What’s the price of a Ford Ranger engine?

Ford Ranger Engine hesitates during acceleration Inspection costs $89 on average. It can be frustrating for any driver to expect certain acceleration from their vehicle only to find that the vehicle seems to be hesitant while speeding up.

What kind of sensor is on Ford Ranger?

This is a little job worth doing on any fuel injected vehicle not just the Rangers. PS: My Ranger is a 2004 Edge with the small V-6. Yours may be slightly different. The MAF Sensor will be the first sensor in line on the out flow of your air breather box.

When do I go up, my Ford Ranger loses power?

Ford mec … read more 96 Windstar, while driving at regular speed, RPM’s go down, no change with pedal movement (Boggs). Stop put in park. Push pedal and engine revs up and then goes down holding pedal in same position. So … read more 1994 Ford Ranger: 4 cyl. Runs great in 1st, 2nd, 3rd gear..loses 1994 Ford Ranger. 4 Cyl.

What kind of truck is a Ford Ranger?

Ford F-150 2002. My truck when driving between 45-65 mph, it kind of sputters very bad. It feels like a big bang that slows down the truck and if you still have the gas pedal down it keeps repeating i … read more I have an old U-Haul 17 foot box truck, which is a 1989 ford 350 with a diesel engine and a 3 speed automatic transmission.

What’s the problem with the clutch on a Ford Ranger?

Issue: You have to push the clutch to the floor to shift gears. Problem: More times than not, you still have air in the clutch line and need to further bleed the system. Fix: If a new installation: check pedal height and adjust to factory specifications.

What kind of transmission does a 1994 Ford Ranger have?

I Have a 1994 Ford RangerXXXXXwith a v-6 4.0 engine and automatic transmission with 147,000 miles. I had an intermitten problem on acceleration, the engine would flatten out and pick up speed slowly, … read more

Where is the fuel shut off valve on a 2005 Ford Ranger?

See all problems of the 2005 Ford Ranger . The contact has a 2004 Ford Ranger. The fuel shut off valve was located at the front of the passenger seat under the dash board. The passengers can contact the component with their feet because of its position. This makes the engine shut down when driving.

How long does it take to re-start a Ford Ranger?

Vehicle will re-start only after removing and re-installing the #19 fuse to re-set the system. It may require several re-sets of thirty or more seconds each, after which the vehicle may run normally for a short distance or up to several months of normal driving.

What should I do if my Ford Ranger stall?

EXCEPT WHILE SPRAYING QUICK-START INTO INTAKE. FOR THOSE WHO CARE CTC IS PROBABLY IN COMPARISON TO AUTOZONE BUT IS IN CANADA – NATION WIDE AND READY TO RIP YOU OFF!!

Are there any problems with the Ford Ranger?

Ford Ranger owners have reported 11 problems related to engine shut off without warning (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Ford Ranger based on all problems reported for the Ranger.

Why does my Ford Ranger engine stop accelerating?

It has been taken to Ford dealership for repairs 3 times. Each time the engine control relay diode has been changed and blamed for problem. The vehicle has been connected to computer and driven (first time at Ford repair shop), the engine has cut out causing vehicle to stop accelerating and the computer shows that nothing is happening.

Clean the inside of the plug also. Don’t forget to clean the plug under the hood that plugs into the sensor. Put a rag under it while you spray to catch the overflow. That stuff will ignite on a hot engine. Lastly check your exhaust pipe.

What kind of engine does Ford Ranger have?

Truck has 2.9 Liter v6, fuel injected. Turns over freely. Eventually starts after maybe 60 seconds, some jockeying the acelerator. Replaced fuel filter. 92 K miles on vehicle.

What happens when the O2 sensor goes bad on a Ford Ranger?

When an O2 (oxygen) sensor go bad, it’ll cause your Ford Ranger ‘s engine to run less efficiently. Your Ranger can exhibit symptoms when the Oxygen sensor has gone bad. Or, it may exhibit none at all. Often enough, the only sign of the problem at all is the service engine soon light being on.

What does it mean when your Ford Ranger wont accelerate?

If your Ranger won’t accelerate, but the RPM’s do not change, that is an indication that there is an issue with creating power. The issue is going to be something affecting the motor. Here are some common issues that can affect the motor:

Why is the spark chain on my Ford Ranger not working?

The timing chain (or belt) is responsible for keeping the upper valve train synced with the crankshaft. This is vital for spark timing. If the timing is off a little and the engine still runs, the timing belt may have skipped. If it has jumped too much the Ranger may not even fire.

How can I tell if my oxygen sensor is bad?

Your Ranger can exhibit symptoms when the Oxygen sensor has gone bad. Or, it may exhibit none at all. Often enough, the only sign of the problem at all is the service engine soon light being on. The good news is, if you end up discovering that the oxygen sensor is bad, they really aren’t that expensive to replace.

How many plugs does a Ford Ranger need?

(Format: “P1234” – many auto parts stores will read them for free if your engine light is on). Billed for 8 plugs so I’ll guess its a six not that it matters much. You should be able to unplug the IAC (9F715) with the engine warm and have it remain running at around 550RPM and be able to control the idle otherwise.

Why does Ford Ranger engine stay at high revs when?

Join Us! I have a 1998 Ford Ranger V-6 and since I’ve had it the engine likes to stay at 2,000 – 2,500 RPM when out taken out of gear while acceleration for a little before dropping down to idle. I thought this might be the idler motor, so I replaced it but it is still doing it and has been since.

Why does my Ford Ranger run at idle?

The IAC Module is used to adjust the engine idle RPM speed. The IAC Module opens or closes an air bypass valve (vaccume line) inside the throttle body. It is used to allow the engine to run at idle without stalling due to lack of air when the throttle body is closed (zero throttle input).

From what I’ve been told the fuel temperature ranges from about 40 – 60 degC normally but mine was getting in to the 80’s. Apparently at about 83 the problem started to develop but at 84 it was going in to reduced power mode but with no notification of the problem. This has been discussed with Ford and is an issue that has to be investigated.

Why does my Ford Ranger hesitate when accelerating?

If I accelerate it will hesitate big time and I can a feel a noticeably loss of power. If I floor the gas pedal it’ll hesitate, then take off full power for about 3 seconds and then completely loose power as if though the motor was shut off but if I let off the gas it will idle between 500 and 700 sometimes wanted to shut off.

Why does my Ranger not shift into 4×4?

I have a 93 Ranger 4×4 3.0 5 speed that will not shift into any 4×4 function. I have changed the selector button, shift control module. There is power to the selector buttons on one side of the switch but none on the other when activated. The fuses are good. Does anyone else know anything about them?

What does limp home mode on Ford Ranger mean?

A summary: Engine lost power and went in to a “limp home mode”, but without the usual dash warning light and no Fault Codes, even on genuine Ford Dealer diagnostic equipment. Loss of power happened very quickly and about the best the car would do with the 2500 Kg van behind was about 40 kph.

What to do if your Ford Ranger loses power?

Once you have analyzed the symptoms of engine power loss on your Ford Ranger, you will need to locate the problem on your Ford Ranger. To operate the engine must be supplied with an air fuel mixture. The function of the flow meter will be to send the correct air fuel balance to the computer.

Why is my Ford Ranger running so slow?

It’s throwing 2 codes and both are P0401 aka EGR insufficient flow. Would this cause the truck to be as slow as it is? No, this is related to exhaust gas recirculation system. It could be caused by carbon build up in the EGR passage, EGR valve, etc. It would not cause these symptoms.

What kind of engine does a Ford Ranger have?

On Ford Rangers there may be diesel or petrol engines. They differ for fuel combustion, however the general functioning is identical. When the engine is started by the starter, it will work with cylinders, generally four, however it depends on the power of your engine.

Why does my Ford Ranger rattle on the road?

The metal-on-metal causes a rattle on uneven road surfaces as a result of the bad fit and alignment. Ford explained that it was as a result of a bent floor pan and a Ford Engineer would need to be sent out to investigate and report on the possible repairs.

Expect a smoother cleaner running engine also. 4-10 more horses also translates into fuel savings. This is a little job worth doing on any fuel injected vehicle not just the Rangers. PS: My Ranger is a 2004 Edge with the small V-6. Yours may be slightly different.

What makes a 1994 Ford Ranger XL not run?

I have a 1994 Ranger xl 2.3L 4cy, been trying to find out what is making it not run. Been in and out of the parts house, they don’t know nothing over there, or the are keeping every thing to them selves.

Why does my Ford Ranger stall while driving?

I had this same problem with a 2004 ford ranger 4.0 liter by 5 speed manual and went through the fuel pump and filter fuel pump relay the coil pack crank sensor and a bunch of checking grounds. Finally pulled the inertia switch off and the plug was melted and just bypassed it and shes run good since then.

Can a misfiring crankshaft sensor turn off the engine?

In this case, your car will still run but the engine will turn off after some time. The misfiring will also occur the same way. If you keep ignoring the signs, the engine will shut off permanently. How to test Crankshaft and Camshaft Position Sensors?

What are the symptoms of a bad crankshaft position sensor?

It’s one of the most serious crankshaft position sensor symptoms. The computer receives a malfunction code when the sensor is completely gone. The symptom starts with difficulty in starting and leaves the car dead one day if you don’t get it fixed. The starting problem could be the result of electrical connection or circuit problems too. 5.

Why does my Ford Ranger have a hard time starting?

My 99, 4.0 ranger has a hard time starting when its cold out and it has sit over night. I usally have to crank it twice until it will start and when it dose start it hesitates a little and then idles fine. I have replaced the idle air control and the fuel filter. The engine runs good and strong.

How big is the crankshaft on a Ford Ranger?

Ford Ranger 3.0L V-6 Crankshaft Pulley Bolts 107 ft-lbs Flywheel to Crankshaft Bolts 59 ft-lbs Upper Intake Manifold / Throttle Body 19 ft-lbs Exhaust Manifold 19 ft-lbs

What happens when the crank sensor goes bad on a Ford 3.0L?

When the crank sensor goes BAD on your Ford 3.0L or 3.8L vehicle, the very first symptoms you’ll see is a No Start No Spark Condition affecting your car. Here are some more specific symptoms of a BAD crank sensor: Your 3.0L or 3.8L car (pick up, mini-van) will Crank but not Start.

Truck has 2.9 Liter v6, fuel injected. Turns over freely. Eventually starts after maybe 60 seconds, some jockeying the acelerator. Replaced fuel filter. 92 K miles on vehicle.

Is there more horsepower in a Ford Ranger?

On the can of cleaner they claim 4-10 more horsepower at the wheels with a clean MAFsensor compared to a dirty one. Expect a smoother cleaner running engine also. 4-10 more horses also translates into fuel savings. This is a little job worth doing on any fuel injected vehicle not just the Rangers.

When did the 1993 Ford Ranger come on the market?

No accident or damage reported to CARFAX. 1st owner purchased on 08/05/93 and owned in CO until 03/16/18 • 2nd owner purchased on 03/16/18 and owned in CO until 05/22/21. 1st owner drove an estimated 0 miles/year • 2nd owner drove an estimated 2,448 miles/year. No service history reported on this vehicle.

What was the problem with my Ford Ranger?

Was driving my 93/94 Ford Ranger P/U Standard Transmission today and it died suddenlly on the highway, the highway was very noisy and could not troubleshoot, so I added gas and tried to start it but it would not run, the starter runs OK, then added fuel to the intake manifold to see if it world start with help but would not.

How does 4 wheel drive work in a Ford Ranger?

Before we tell you about the 4-Wheel Drive (4WD) systems that came in the Ford Ranger, let’s make sure you understand what it is: In a typical 2-Wheel Drive (2WD) Ford Ranger, the power from the engine is sent through the transmission, and is connected to the rear axle by a driveshaft.

When was the last year Ford Ranger had 4WD?

With the new design, the “push button” 4WD was replaced with a knob switch mounted in the bezel that surrounded the radio. 1997 would be the last year that you could get a manual 4WD transfer case in a base model Ranger. The big change in the 4WD for 1998 was a redesigned front suspension/axle setup.

At around 7500km they have re flash the PCM, change the transmission oil and a valve… always the same downshifting problem… on my ford ranger lariat 2019, I have a transmission problem and I would like to know if your truck does the same thing, or only me who experiences this problem.

Can a Ford Ranger be used as a 4WD?

For this reason, a part-time 4WD should not be used on a dry pavement; check the owner’s manual for details. Ford offered an optional manual transfer case on some earlier FX4 trims, but we only found one 2003 Ranger with a manual transmission and manual transfer case in all the U.S.

Is the Ford Ranger Wildtrak safe to drive?

Original review: Nov. 2, 2020 Ford Ranger Wildtrak 2019 only done 30,000. The auto has gone into limp mode on the freeway a couple of times now and day almost caused the biggest crash. I don’t feel safe driving this car.

Where is the throttle position sensor on a Ford Ranger?

Your Ford Ranger uses a series of complex sensors to report what is going on to the ECU. The ECU then uses this information to adjust the timing, air fuel mixture, and more. When one of them goes wrong, it can lead to stalling for sure. Throttle Position Sensor – The throttle position sensor is typically located on the gas pedal.

Is it worth it to buy a new Ford Ranger?

Be worthwhile to buy a new one for a few dollars and pull the old one when it is stalled and put the new on in and see if it starts.

What kind of transmission does a Ford Ranger have?

I drive the 2003 Ford Ranger edge v-6, 3. 0. In stop and go traffic my transmission shifts very hard into 2nd and 3rd gear. . . It has happened numerous times through out the year I’ve had the truck. The problem is usually from 0-25 mph.

Are there any issues with the Ford Ranger T6?

There have been numerous reports of the Ford Ranger T6 3.2 and 2.2 with the automatic transmission experiencing a few issues related to the torque converter. Torque Converters locking up and gears being jammed in 2nd and 3rd are common on certain year models.

Why is my Ford Ranger not shifting gears?

The gearbox could become jammed in 2 nd gear forcing the driver to operate the vehicle in the selected gear only. Selecting the manual shifting option is not possible. After driving the vehicle in the jammed gear for some time and then restarting the vehicle seems to have resolved the problem.

The problem has now changed, the vehicle does not start at all now. Engine cranks but no running, still seems like it is not getting any fuel. Hoiwever, the code flashed by the security light is now 1-4 and it starts as soon as I turn the key to the on position.

What kind of bodystyle does a Ford Ranger have?

There are three Ranger bodystyles – ‘Regular’ single cab, ‘Super’ (which has occasional rear seats) and ‘Double Cab’ with proper rear seats. The ‘Regular’ bodystyle is only available with base ‘XL’ trim, while the ‘Super’ option only comes with the mid-range ‘XLT’ and ‘Limited’ trim levels.

What does the Immobilizer do on a Ford Ranger?

After driving for a couple of minutes the immobilizer/security icon on the console starts flashing. The sequence that it flashes is 2 long and 4 short flashes. No further problems seems to appear while driving. Once the vehicle is stopped and the engine is switched off however it is a struggle to get it started again.

Where is the PCM on a Ford Ranger?

On the passenger side there is an electronics box WL-85. On the driver side the electronics box is WL-93. I first thought that the WL-85 is the PCM but according to the manuals the one on the driver side (WL-93) is the PCM.

If it is a major engine issue then, yes, it is a concern, and you could approach Ford for some assistance with the cost of repairs. If it turns out that it’s a relatively minor problem, then it’s not something to be overly concerned about. At this point all you can do is work with the people trying to find the cause.

Is it possible to make a Ford Ranger faster?

It is quite difficult to make a petrol T6 Ranger faster without spending a lot of money.

Diesel Rangers (2.2-litre and 3.2-litre), however, have a large range of options, starting with improving the tune in the ECU to optimise the air:fuel ratio (normally 25% increases in power and torque, and 10% improvement in fuel economy ), and blocking the EGT system.

How to contact a Ford dealer in the US?

Give us a call. For the hearing- or speech-impaired: Please contact the Telecommunication Relay Service by dialing 711. If you prefer to send letters by post, our mailing addresses are below. Need to find a dealer with specific services?

How much does it cost to repair a Ford Ranger?

Fair price ranges for your car repair costs. Choose from 332 Ford Ranger repairs and services for model years 1990 to 2022 to get a RepairPal Fair Price Estimate™.

Can a Ford dealer modify or remove a review?

No. Ford personnel and/or dealership personnel cannot modify or remove reviews. Are reviews modified or monitored before being published? MaritzCX moderates public reviews to ensure they contain content that meet Review guidelines, such as: ‣No Personal Identifying information (e.g., customer phone number or email)

Is the Ford Motor Company web site accessible?

At Ford Motor Company, we are committed to making our website accessible for all of our site visitors. In addition to the improvements we have completed, our teams continue to work dedicatedly to ensure our website content is accessible so that our site visitors have the best possible experience.

How many miles can a used Ford Ranger last?

If you’re in the market for a used Ranger then this article might help you. Ford Rangers are well built trucks and can easily last over 200k-250k miles if they are well maintained. Earlier models suffered from timing chain and transmission issues. T6 Rangers had transmission and Turbo problems with early models.

Are there any recalls on 2002 Ford Ranger?

If you’re in a market for an older Ranger, here are some issues that you need to know about. The 2002 Ford Ranger models, according to Car Complaints, have seven recalls and 486 complaints that are centered around transmission problems and the sporadic flashing of the overdrive light.

Why does my Ford Ranger have a low rough idle?

The truck was idleling smooth and drove fine. The truck always started right up. A day maybe two after changing the plugs, I started noticing the low rough idle. As well the battery gauge would fluctuate up and down (maybe a 1/4″ of movement). However, as long as I was driving or giving it gas everything was stable.

When did the Ford Ranger get a V6?

The Ford Vulcan V6 is a 3.0L, 60° V6 engine, first introduced for the 1986 model year and originally designed to be the optional engine in the Ford Taurus and Mercury Sable. In 1991 it became available in the Ford Ranger where it replaced the Cologne 2.9 engine (which it is not related to) as the base V6 in the Ranger

How to troubleshoot a Ford 3.0L no start condition?

The PIP Sensor (which is what Ford calls the crank sensor) is functioning correctly. The ignition coil is good. The crank sensor is functioning correctly. Your next step is to verify fuel pressure. Go to: No Start 2: Checking Fuel. CASE 2: Spark was NOT present in all of the cylinders.

Where to check for Spark on Ford 3.0L?

Check for spark directly on the ignition coil tower using a spark tester. On occasion, the distributor cap and/or rotor stop distributing spark. The best way to test them, is to check for spark directly on the ignition coil tower.

Where to find ignition coil on Ford 3.0L?

You can find the ignition coil here: How To Test The Ignition Coil (Ford 2.9L, 3.0L, 3.8L). If the PCM is not activating the ignition coil, this usually means that the ignition control module is fried. Test the ignition control module.

How long does it take to clean a Ford Ranger?

It takes about 10 minuets total time and it’s worth the effort. On the can of cleaner they claim 4-10 more horsepower at the wheels with a clean MAFsensor compared to a dirty one. Expect a smoother cleaner running engine also. 4-10 more horses also translates into fuel savings.

What to do when your car won’t idle?

Won’t idle for crap but runs on the freeway but poor mileage. Will suck air when driving and may drip oil or water when parked. 1. Clean the Mass Air flow sensor 2. Replace throttle control sensor $30 Has to be one of these things. Try looking down the back of the engine with a mirror and flashlight for oil leak–listen for hissing vac leak

Why does my Ford Ranger run for a little then dies?

Next check is the fuel pressure regulator, your looking for fuel coming out the top and bleeding into the vacuum line thus flooding the engine. Another thing that happens is the distributor pickup coil can fracture, it runs good until it gets hot then it will go open and the engine stalls, and the ignition module can act the same way.

Can a Ford Ranger run with low fuel pressure?

So check the lift pump first if it is running and pumping a good stream of fuel then move onto the pressure pump, and yes your fuel pressure is low. Here is a chart. All makes and models. http://jameshalderman.com/links/book_adv_eng_perf_5/s_and_c/F uel_Pressure_Specifications.pdf

EXCEPT WHILE SPRAYING QUICK-START INTO INTAKE. FOR THOSE WHO CARE CTC IS PROBABLY IN COMPARISON TO AUTOZONE BUT IS IN CANADA – NATION WIDE AND READY TO RIP YOU OFF!!

It has not been in an accident, not gone off road, not had any major work on it. The probalem existed when we got it, but int he last month or two it has gotten far worse. Now it is ridiculous. It’s actually a somewhat common problem on a lot of Fords from Rangers and Explorers to Mustangs and Edges. The problem is caused by one of two things:

Can you put gas in a Ford Ranger XLT?

Location: Bedrolls now in NM and in TX. These trucks probably have been completed redesigned but I had a 1983 Ranger XLT that did that from the time it was new. I don’t recall ever finding out what was causing the problem. My dad had this problem years ago on his Toyots pickup.

Why does my Ford Ranger shut off after filling the tank?

-The tank is run low and filling it causes a vapor lock to shut the gas pump off repeatedly until you reach around 1/3 of a tank. -It doesn’t matter what fuel level you start with, the gas pump continually shuts off. This is tied to an issue with the filler neck itself, that also contains the vent.

Which is the best Power Rangers action figure?

It’s Morphin Time! The classic Mighty Morphin Power Rangers franchise is bigger than ever, and BBTS has the power to make your collection shine! Control the power of the Zords featured in different Power Rangers series with our wide array of incredible figures and accessories.

Are there any Mighty Morphin Power Rangers toys?

The classic Mighty Morphin Power Rangers franchise is bigger than ever, and BBTS has the power to make your collection shine! Control the power of the Zords featured in different Power Rangers series with our wide array of incredible figures and accessories. Mighty Morphin Power Rangers Lightning Collection Yellow Ranger Vs. Scorpina Battle Pack

Is it easy to put gas in a Ford Ranger?

Ford hasn’t released anything on this, but Mazda did do a recall on some of their sister models that had the same issue. Mazda blamed the higher levels of oxygenation in the gas as well as increased flow rates at the pump for exacerbating the issue. Thank you. Is it easy to remove the bed? I have never done that Like this ? From a Scottish TV show.

How does the Ignition Control Module ( ICM ) work?

The ignition control module (ICM), upon receiving this PIP signal, starts to ‘open and close’ the ignition coil’s primary current. As you might already be aware, it’s this action that makes the ignition coil spark. The fuel injection computer also receives the PIP Signal at the same time that the ignition module does.

What should I do if my ignition module is not working?

If you cannot start the car, you need to test the ignition control module using a light timing tester to check the output of the module. Connect the timer to the positive terminal of the battery and check the continuity of the black output wire while cranking the starter. If the light blinks, the module is good.

Is the Ford ignition control module interchangeable?

These ignition control modules (ICM) are not interchangeable but are tested in the exact same way. Also, the photos (in the image viewer) show some of the tests performed on a V8 engine. This might make you think that they don’t apply to your 3.0L, 3.8L V6.

What is the wiring diagram for a Ford Ranger?

Wiring Diagram: The following wiring diagram may be of help: 1992-1994 2.3L Ford Ranger Ignition System Wiring Diagram. * Your specific Ford vehicle may have different colors. * Your specific Ford vehicle may have different colors.

How is the crank sensor connected to the ICM?

The crank sensor is fed with power and Ground. The crank sensor is a Hall-Effect type sensor. The crankshaft rotation induces the crank sensor to start creating two separate crank signals. One crank signal is called the CKP (crankshaft position) signal. The CKP signal is only sent to the ICM.

How to test the ignition module and crank sensor?

Since the ICM isn’t cheap and replacing the crank sensor is labor intensive (you’ve got to remove the timing belt), testing the ICM and crank sensor, on your 2.3L Ford Ranger or Mustang (or B2300), becomes a must! For your cross reference information, the ignition control module test that this article covers are:

Why does my Ford Ranger have no power?

[quote=”tomatofarmer1″ post=111306]This could be so manny things, from ignition components, dirty injectors to restricted fuel/ fuel pressure as Tedybear315 noted. Maybe a little more detail about the make of the vehicle and more detail about the symptoms would help.

What kind of problem does a 1985 Ford Ranger have?

1985 Ranger V6, 2brl carb, manual trans. has a chronic problem of stalling during slow down at turns and intersections. It will start right back up. It runs great except for the stalling and it burns a little oil.

Which is the best model of Ford Ranger?

The 1999 Ford Ranger Pickup 4WD is the second most popular truck for this model. It is a five speed manual transmission truck that is built as a regular cab with a short bed. If you own this one, you can expect to get 22 mpg in the city and 27 mpg on the highway. You have to go back to 1986 to find the most popular Ranger model.

What did the 2001 Ford Ranger look like?

The 2001 Ford Ranger was built with new metal being placed in front of the windshield area. This gave the model a new and compact look that had not been there before. This one was a sporty 2WD model that came with a monochromatic outside.

This one was a sporty 2WD model that came with a monochromatic outside. It also has 16-inch tires. This gave it an aggressive look that many drivers noted looked ike a 4WD. It has a 2.3 liter and four cylinder engine along with an extension for the cargo bed. This model also came with anti-lock brakes as a standard feature.

How many miles does a 2000 Ford Ranger get?

Only 3 major repairs – replaced radiator ( cracked plastic connectors ), timing belt at 180k miles, and replaced clutch at 215k miles. 2.5 4cyl engine is still tight – burns no oil. Mileage on truck evenly divided between city, high speed freeway ( over the Sierras and

When was the last time I serviced my 2000 Ford Ranger?

1st owner drove an estimated 0 miles/year • 2nd owner drove an estimated 45,381 miles/year • 3rd owner drove an estimated 8,937 miles/year. Last serviced at 122,427 miles in Asheville, NC on 07/10/20 • Vehicle serviced • Oil and filter changed. Mileage: 133,000 miles Body Type: Pickup Color: Gold Engine: 6 Cyl 3.0 L Accident reported.

Where was the 2000 Ford Ranger XLT purchased?

No accident or damage reported to CARFAX. 1st owner purchased on 08/11/00 and owned in MS until 07/07/08 • 2nd owner purchased on 07/07/08 and owned in TN until 08/16/16 • 3rd owner purchased on 08/16/16 and owned in WA until .

What kind of suspension does a 2000 Ford Ranger have?

For 2000, the 2WD can be had with a “Trailhead” off-road style suspension package complete with larger tires and wheels, giving it the tough look of its 4WD cousin. All 2000 Ford Ranger models have new wheel designs, and the XLT 4WD Off-Road Group receives a stainless-steel front-suspension skid plate.

What’s the idle rate on a 96 Ford Ranger?

96 Ford Ranger 6cyl 3.0 w/ 117,000 miles. Started to idle high at 2000 to 3000. Sometimes it comes down to normal, sometimes not. Noticed I could literary take my foot of the gas pedal when doing 40 or 50 and it would not slow down.

2000 Ford Ranger XLT 4×4 Offroad, 4.0L ext cab, Converted to Manual M5OD-R1HD. Thanks for the suggestions, I am in class right now but when i get home I’ll check the different points.

Is the oil gauge out on a Ford Ranger?

Also, the oil gauge will flicker like crazy occasionally at idle. The door sensor is out also if that matters. When I bought it, it idled rough, but at the appropriate rpms (650-750 in drive) but it was missing.

Is there a fault code on my Ranger?

Rather than continue with what I was writing up in my other thread (Non-trip, trip report) of the saga of repairing my Ranger I think it best to put something here to warn fellow Ranger/BT50 owners.

Do you need to clean MAF sensor on Ford Ranger?

Clean the Sensor – Now that you’ve removed your Ranger’s MAF sensor, it’s time to clean it. You’ll need the MAF cleaner. You are not scrubbing anything.

When did Ford Ranger get a new engine?

In 1998 further improvements were made, with a new intake manifold, changes in engine management and cam timing; output was further increased to 155 hp (115 kW) and 185 ft·lbs. A plastic upper intake was added in 2001.

Is there a problem with my Ford Ranger?