How to replace battery 00-07 Ford Focus?

How to Replace Battery 00-07 Ford Focus – YouTube In this video, 1A Auto shows you how to remove, install, and replace a car battery. This video is applicable to the Ford Focus, years 00, 01, 02, 03, 04, 05,… In this video, 1A Auto shows you how to remove, install, and replace a car battery.

Where is the positive post on a 2001 Ford Focus?

The 2001 Ford Focus requires that the battery have the post located on the top. Side-post batteries will not work, as the cables are only made long enough and positioned to reach the top of the battery. The positive post has to be located on the right side of the battery.

What are the minimum cranking amps for a Ford Focus?

The minimum cold cranking amps requirement for the 2001 Ford Focus, is 590 cca; the minimum total cranking amps is 735. Ford Focus will require a battery that runs on 12 volts, but this is standard for all cars.

What are the symptoms of a Ford Focus engine failure?

Common Failure symptoms: 1 Loss of all instrument cluster functions and lights 2 Speedometer, temperature and rev counter drops to zero 3 Engine cuts out while driving 4 Non start 5 Immobiliser light flashes 6 Mileage shows dashes 7 Erratic gauges 8 Pixilated screen

What causes a Ford Focus to cut out while driving?

Ford Focus Dashboard Instrument Cluster – common fault This Ford Focus instrument cluster is a very common failure, this will cause an intermittent failure of all instruments, lights and gauges. If the instrument cluster fails while driving, then this will often cause the engine to cut out.

What happens when the instrument cluster fails on a Ford Focus?

You will notice the immobilizer light flashes continuously when the instrument cluster fails and the mileage reading will only show dashes (——-) instead of the mileage. Often the instrument cluster will fail completely and stay that way.

How to rebuild a Ford Focus dashboard cluster?

To pay for the rebuild click the link above, select your cluster and click: Get yours rebuilt Print the payment/booking confirmation email. Package the Ford Focus dashboard instrument cluster inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

What should the voltage be on a Ford Focus?

Try re-connecting the battery first. Then If you have a volt meter try connecting it to the battery and see what the voltage is without turning the key. It should be no less than 12 volts without the engine running.

What happens when I put a new battery in my focus?

OE battery bit the dust, put new battery in and sometimes it would say battery there was low battery if I had the key on engine off, even after sitting over a weekend and checking the battery. i realize this may not be happening to you, but it doesn’t reset itself.

What kind of battery does Ford Focus Mk3 have?

This smart charge charging system charges with 14.8 volts load voltage. Lead acid batteries are charged with 14.6 volts. The smart charge charging system from the ford focus mk3 (with Start/Stop system) overcharge a lead acid battery. Battery is broken in a short time.

How long does the EcoBoost battery last in a Ford Focus?

My 2016 Focus Ecobost battery has just failed after 3 years 5 months. It has stop start system that I do not use.Car is regularly used with few short journeys and has covered 34250 miles from new and regularly serviced. AA who helped me to Ford main dealer said he would expect modern day battery to last 6 to 8 years.

Why did my Ford Focus Zetec battery go flat?

I own a 2008 Ford Focus Zetec 1.6 Petrol. Couple of days ago the battery on it went flat. I called up AA guys for a jumpstart (and to establish the reason behind battery dying all of a sudden).

What kind of battery does Ford Focus 1.6 use?

There seams to be a number of battery types for 2008 1.6’s so be careful to get the correct type. If you intent to keep the car then go for a better 3yr warrantied battery The Ford Focus must be fitted with a calcium-type battery. Fitting a traditional lead-type will upset the Ford charging system and cause all sorts of problems.

Why is the battery on my Ford Focus not working?

If a new car battery has been installed, the battery may not have yet reached its full capacity. There is nothing to worry about. A new battery only develops its full capacity over time. The voltage of the battery on your Ford Focus can be measured precisely with a multimeter.

Where are the electrical connectors on a Ford Focus?

If you recall, or even if you don’t, the older Fords have a three-wire electrical connector at the rear of the alternator that included the battery positive lead. Due to the fact these consisted of all flat connectors, they would work loose and/or start to wobble over time.

What kind of battery does a Ford Focus have?

Only cars (Ford) with Start/Stop System have a EFB battery ( E nhanced F looded B attery) and a BMS. All others (old Ford’s) have normal lead-acid batteries in it. Lead batteries do not have a BMS. 1. Switch on ignition (do not start engine) 2. Switch on dipped beam 3.

What to do if your Ford Focus battery goes bad?

The windshield wipers It sounds like you failed to use the preset saver tool before disconnecting the main power supply, this tool plugs right into the OBD2 port and keeps the memory active until a new battery is installed. If this is the case then the only place that can reflash the vehicle is the dealer, runs about a hundred bucks for a reflash.

What kind of charger does Ford Focus Mk3 use?

If you have a battery sensor on negative pole, you have a smart charge charging system. (Intteligent load system) This smart charge charging system charges with 14.8 volts load voltage. Lead acid batteries are charged with 14.6 volts. The smart charge charging system from the ford focus mk3 (with Start/Stop system) overcharge a lead acid battery.

What to do if your Ford Focus is dysfunctional?

Hopefully that’s not the case but if you need some help in a similar situation try leaving your car for 2 hours in idle, he said it can reset if you drive around for two hours too but it’s sketchy when the acceleration isn’t working. I’m leaving my car for two hours in idle right now, will post results when I have them.

Why is the Check Engine light still on on my Ford Focus?

The “Check engine” light in a Ford Focus is designed to stay on until it has been deactivated by a mechanic at an auto garage. If the mechanic forgets to disable the light, or if you prefer to make repairs yourself, you will need to deactivate the light on your own.

How to reset the check engine on a Ford Focus?

Open the panel covering the input jack and plug in the scanner. Turn on the scanner if it does not power up automatically. Turn on the car’s engine. Observe the scanner’s screen for the car’s trouble codes. Clear the trouble codes with the scanner, either one by one or all at once with a “clear” button (if available).

Where is the diagnostic input jack on a Ford Focus?

Locate the diagnostic input jack. It is below the steering column, either in the center or right side of the dashboard panel. Open the panel covering the input jack and plug in the scanner. Turn on the scanner if it does not power up automatically. Turn on the car’s engine. Observe the scanner’s screen for the car’s trouble codes.

Where is the air bag light on in a Ford Focus?

Pictures are of the yellow airbag light on the drivers, the center console “passenger airbag off”, and a few showing where he’s sitting in the seat and both the yellow lights are still on.

Are there any problems with the 2007 Ford Focus?

2007 ford focus With Defective Front Passenger Seat air bag. Consumer States That The air bag Does Not Sense When His Girlfriend Is In The Passenger Seat. He Also Says That Cold Weather Enhances This Problem. *kb The Passenger air Bag Light Would Illuminated Intermittently. *jb

Is there a recall on Ford Focus air bags?

The contact spoke with lithia Ford of klamath falls (2833 washburn way, klamath falls, or 97603) who stated that there was no TSB or recall. The manufacturer was made aware of the failure and stated that there was no recall. The VIN was not included in NHTSA campaign number: 07v541000 (air bags).

How do you change the battery cable on a car?

Run the new positive cable back through the engine bay in the same way the old one was. Attach the negative cable to the body or block. Locate the hole the old negative cable was attached to and use the same bolt to connect the new cable.

Where does the positive battery cable go in a car?

If your battery is in the trunk, the positive cable will attach to another connector near the body of the car. Simply disconnect it from there. Remove the battery. Some cars will not require the removal of the battery while replacing battery cables, but even if it is not necessary, it may make the process easier.

Why does my 2004 focus not charge the battery?

My wife’s 2004 Focus has a problem with the charging system. The alternator checks out fine and the battery is good. The problem is the car runs off the battery when running and the alternator isn’t recharging the battery. Is there something in line between the alternator and battery that’s causing the problem?

What happens if you replace the battery in your car?

Also, it’s possible that everything about the battery might be fine, but some key systems could have been damaged or disabled, which could lead to some serious “side effects” for the entire vehicle. Learn which battery is right for your vehicle. Did You Replace the Battery Correctly?

Where is the voltage sensing wire on a focus?

The ECU (PCM)regulates the voltage output to the battery. The connector has 3 wires. The middle one is blue and is called the voltage sensing wire. It goes to pin # 72 on the ECU (on a Zetec equipped Focus for sure).

How to replace battery 00-07 Ford Focus?