How do you replace a occupancy sensor?
How do you replace a occupancy sensor?
- Step 1: Turn Off Power. Turn off power at the circuit breaker for the room or outlet where you’ll be installing the sensor.
- Step 2: Remove Switchplate. Remove existing switchplate cover with a screwdriver.
- Step 3: Connect Sensor. Connect the occupancy sensor to the outlet, one wire at a time.
- Step 4: Screw In Sensor.
What is the difference between vacancy sensor and occupancy sensor?
An occupancy sensor turn lights ON automatically upon the detection of motion then turns the lights OFF automatically soon after an area is vacated. A vacancy sensor does not offer an option of automatically turning lighting on requiring a manual button press from the occupant (manual/vacancy mode).
How does the occupant classification system work in a Ford Focus?
Failure to follow this instruction may result in system failure and the incorrect operation of the OCS system. Occupant Classification System (OCS) system components, seat cushion foam pad, bladder with pressure sensor and Occupant Classification System Module (OCSM) , are calibrated to each other and are serviced as an assembly.
Where are the sensor locations on a Ford Focus?
Turbine Shaft Speed (TSS) Sensor Top of transmission. Wheel Speed Sensor (Left Front) Left front wheel hub. Wheel Speed Sensor (Left Rear) Left rear wheel hub. Wheel Speed Sensor (Right Front) Right front wheel hub. Wheel Speed Sensor (Right Rear) Right rear wheel hub. Alldatadiy.com and Eautorepair.net are professional-grade shop manuals—period.
How to install the OCSM on a Ford Focus?
Release the bracket retainer and slide the OCSM out of the bracket. Note position of wire routing for installation. Route the OCS bladder hose and pressure sensor, OCSM and seat wiring harness out through the seat cushion frame opening. To install, reverse the removal procedure.
Is there a sensor in the front seat?
A sensor mounted in the front passenger seat senses when someone is sitting in the passenger seat. It is one of the most common problems with the airbag systems in most cars, including Mercedes, BMW, Hyundai, Kia, Honda, Audi, Toyota, Chevy, Subaru, Nissan, VW, etc.
Failure to follow this instruction may result in system failure and the incorrect operation of the OCS system. Occupant Classification System (OCS) system components, seat cushion foam pad, bladder with pressure sensor and Occupant Classification System Module (OCSM) , are calibrated to each other and are serviced as an assembly.
How to remove pressure sensor from Ford Focus?
Release the 2 seat wiring harness routing clips from the seat cushion frame. Release the 2 OCS bladder pin-type retainers from the seat cushion pan. Release the pressure sensor bracket retainer and slide the pressure sensor off the bracket. Remove the OCSM . Remove the 2 screws. Release the bracket retainer and slide the OCSM out of the bracket.
Release the bracket retainer and slide the OCSM out of the bracket. Note position of wire routing for installation. Route the OCS bladder hose and pressure sensor, OCSM and seat wiring harness out through the seat cushion frame opening. To install, reverse the removal procedure.
A sensor mounted in the front passenger seat senses when someone is sitting in the passenger seat. It is one of the most common problems with the airbag systems in most cars, including Mercedes, BMW, Hyundai, Kia, Honda, Audi, Toyota, Chevy, Subaru, Nissan, VW, etc.
