Why is my EGR valve on my Ford Focus not working?
Why is my EGR valve on my Ford Focus not working?
It is common for the valve passages to clog and the valve stem to bind. These problems may be fixed, but worn and broken components make it necessary to replace the valve. Follow these steps to troubleshoot the valve and clean it of possible obstructions.
Why does the fuel management light stay on when the EGR is open?
This means the amount of hydrocarbon gases emitted from the tailpipe increases significantly producing a fuel smell. Your engine management light may stay on once your car detects an issue with the EGR valve. This could be caused when the EGR is either constantly closed or open.
Where is the EGR cooling pipe on a Ford Focus?
Apparently Hitler has returned and he is designing engines for Ford!! I have removed the egr cooling pipe, the doofer from the top of the inlet manifold with the electrical attachment (forgot its name, it is secured by 4 torx screws), removed the easy accessed bolts from the back of the manifold.
Where are the EGR Jets in the intake manifold?
A more radical design, implemented in a few models, was the replacement of the valve with EGR jets at the bottom of the intake manifold. Some newer high-efficiency engines, for example those with variable valve timing (VVT), don’t even use an EGR system. If playback doesn’t begin shortly, try restarting your device.
Can you blank the EGR valve on a Ford Focus?
If the EGR was fine, leave it be. If its playing up, replace. People only blank as a last resort on Peugeots because the valve is so hard to get to on some engines, and requires the entire engine being removed from the mounts and pulled forward. Ford Focus 1.6 TDCI – Blanking EGR valve and fault codes – Railroad.
Why does the light come on when the EGR valve fails?
The light flashes if there is a problem with the engine so it will come on when the EGR valve fails. The engine control unit (ECU) monitors the activities of all engine components. It activates the light upon sensing that the valve fails to do its normal function.
Why do I blank the valve on my Ford Focus?
People only blank as a last resort on Peugeots because the valve is so hard to get to on some engines, and requires the entire engine being removed from the mounts and pulled forward. Ford Focus 1.6 TDCI – Blanking EGR valve and fault codes – Railroad.
Apparently Hitler has returned and he is designing engines for Ford!! I have removed the egr cooling pipe, the doofer from the top of the inlet manifold with the electrical attachment (forgot its name, it is secured by 4 torx screws), removed the easy accessed bolts from the back of the manifold.
