What is the model number of Ford Ranger transfer case?

The BW1350 and BW1354 should have a tag held on with a bolt. The top right portion of the tag will list the transfer case model number. The BW1350 can be quickly identified by the cone on the front for the front driveshaft. This transfer case uses a splined receiver instead of a yoke and u-joint.

Is there a 1994 Ford Explorer transfer case?

Transfer Case 94 1994 Ford Explorer 100K Miles Electric Shift Nice! BW1354 (Fits: Ford Ranger) We Appreciate Your Business! Fast & Free Shipping!

What kind of transfer case does Ford F-250 use?

Applications: 1998-and-up Ford F-250 and heavier Super Duty trucks. The BW1350 and BW1354 are both 3-piece aluminum part time transfer cases. They both transfer power from the transmission to the rear axle and when actuated, also the front drive axle.

How does a ranger station transfer case work?

It consists of a front mounting adapter, a front case and a rear cover that transmits power from the transmission to the rear axle. The input shaft and the output shaft are connected together by a coupling sleeve providing direct drive between the 2 shafts. The case assembly contains no lubricant and none should be installed.

How much is a transfer case for a Ford Ranger?

Advance Auto Parts has 10 different Transmission Transfer Case Motor for your vehicle, ready for shipping or in-store pick up. The best part is, our Ford Ranger Transmission Transfer Case Motor products start from as little as $77.99. When it comes to your Ford Ranger, you want parts and products from only trusted brands.

What’s the difference between high and low range transfer cases?

Low-range is for slow-speed operation. Where the case’s high-range ratio may be 1.00:1, low range ratios are typically between 2.20:1 and 3.50:1. High Range: A transfer case drive mode, like Neutral or low-range. Most conventional part-time transfer cases offer a 2-Hi as well as a 4-Hi mode.

Where is the model number on a transfer case?

Weather your looking for rebuilt transfer cases, remanufactured transfer cases, new transfer cases or transfer case parts, the following table is provided to assist you in identification of your existing transfer case model number. To be sure check tag typically located on rear of transfer case, near where the rear drive shaft exits.

When did the Ford Ranger 4 wheel drive come out?

However, a four-wheeled drive version of the Ford Ranger was released in the autumn of 1982. The Ford Ranger was designed using inspiration from other truck models by Ford. Ford Rangers were manufactured with similar grille designs as trucks within the Ford F-Series, which are predecessors to the Ford Ranger.

What kind of shift case did Ford Ranger have?

(Ford Ranger transfer case electronic shift module) Ford still offered the manual transfer case as well as the electronic shift transfer case. The automatic shift transfer cases aren’t as common in the 1986-1988 Ford Ranger as the manual shift transfer cases.

Where is the model number on a Ranger transfer case?

The top right portion of the tag will list the transfer case model number. The BW1350 can be quickly identified by the cone on the front for the front driveshaft. This transfer case uses a splined receiver instead of a yoke and u-joint. These transfer cases take a splined slip yoke on the end of the drive shaft that slides in to the transfer case.

How does Ford Ranger transfer from 2WD to 4WD?

The spring-loaded hub automatically engages on the fly when the transfer case is shifted from 2WD into 4WD. The application of torque to the axle causes the splined collar inside the hub to slide on to the splined axle and lock.

When was the last year Ford Ranger had a manual transmission?

1997 was the last year that a manual transfer case was available in a base model Ford Ranger. Ford re-introduced a manual transfer case in the 2002-2003 FX4 level II equipped Ford Ranger, and only came with the manual transmission.

What is the model number of Ford Ranger transfer case?