How do I fit new front seat tilt release cables on my 3?
How do I fit new front seat tilt release cables on my 3?
3 , unhook the seat back cover at the bottom with a small flat screwdriver and Roll the seat back cover half way up the seat , 4 , pull the handle upward ( it is very tight and will probably break ) 5 , once handle is removed turn the tilt cable holder a half turn and remove the tilt cables upward from the TOP ,
How does the tilt slide work on a Mini Cooper?
The tilt/slide mechanism works by a cable thats attached to the seat back, when the seat back is tilted forward the cable pulls on the mechanism under the seat base and releases it, allowing the base to slide. On both seats the cables had snapped. Layout of cable under the seat base Cable holder at back of seat
How does the tilt and slide mechanism work?
The tilt/slide mechanism works by a cable thats attached to the seat back, when the seat back is tilted forward the cable pulls on the mechanism under the seat base and releases it, allowing the base to slide. On both seats the cables had snapped.
When do you need a seat adjustment cable?
In order to move your car chair into a comfortable position, power-assisted seats use a seat adjustment cable. When this breaks or needs replacing, getting into a comfortable driving position is often difficult – take a look at the range of cables we have today.
How does a broken seat release cable work?
The plastic trim then comes off. The release cable is secured to the bottom of the seat hinge, is treaded through two guides and attaches to a heavy duty spring. The spring hooks around the runner release catch. So, as the seat tilts forward, this cable disengages the runner catch. Chances are that the spring hook has broken.
How is the runner release cable attached to the seat?
The release cable is secured to the bottom of the seat hinge, is treaded through two guides and attaches to a heavy duty spring. The spring hooks around the runner release catch. So, as the seat tilts forward, this cable disengages the runner catch.
Is there a way to tilt the front seat handle?
Once both clips are pushed in, you should be able to gently lever the handle upwards. Be careful not to damage the seat material with the screwdrivers. Once loose, the handle can be lifted out and away to reveal the worn and damaged parts within the old handle.
The tilt/slide mechanism works by a cable thats attached to the seat back, when the seat back is tilted forward the cable pulls on the mechanism under the seat base and releases it, allowing the base to slide. On both seats the cables had snapped. Layout of cable under the seat base Cable holder at back of seat
