How do you calibrate a compass display on 2002 f250 diesel?

NOW PUSH BLACK BUTTON ON CONSOLE AND HOLD UNTIL COMPASS READS (VAR) AGAIN, KEEP HOLDING BUTTON UNTILL YOU SEE CALIBRATE. RELEASE BLACK BUTTON, DISPLAY WILL GO OFF AND COME BACK ON IN CAL. NOW DRIVE IN A CIRCLE FOUR OR FIVE TIMES. THE CALIBRATION MODE WILL GO OFF AND THE COMPASS SHOULD BE CALIBRATED AND READ PROPERLY.

How long does it take to calibrate a Ford compass?

To calibrate, press and hold the RESET control for approximately ten seconds until CAL appears. Release the control. 3. Slowly drive the vehicle in a circle (less than 3 mph [5 km/h]) until the CAL display changes to the direction value. It may take up to five circles to complete calibration. 4. The compass is now calibrated.

How do you turn off a compass on a car?

Place a paperclip, toothpick, or similar object into the compass recessed button “A” hole (by temperature button) and push up gently until the CAL indicator turns ON. Release recessed button. Slowly drive vehicle less than 5 km/h (3 mph) in a circle until the CAL indicator turns OFF.

How to change the direction of the compass?

Press the SETUP control to select the Update Zone function and display the current ZONE XX in the center stack display. 5. Continue to press the RESET control until the correct zone appears in the center stack display. 6. The direction will display after the RESET control is released. The zone is now updated.

What can affect the accuracy of a compass?

The compass heading is displayed in the center stack display. The compass reading may be affected when you drive near large buildings, bridges, power lines and powerful broadcast antenna. Magnetic or metallic objects placed in, on or near the vehicle may also affect compass accuracy.

How to use an electronic compass in a car?

Electronic compass (if equipped) 1 Start the vehicle. 2 To calibrate, press and hold the RESET control for approximately ten seconds until CAL appears. Release the control. 3 Slowly drive the vehicle in a circle (less than 3 mph [5 km/h]) until the CAL display changes to the direction value. 4 The compass is now calibrated.

What causes a car compass to be inaccurate?

Magnetic or metallic objects placed in, on or near the vehicle may also affect compass accuracy. Usually, when something affects the compass readings, the compass will correct itself after a few days of operating your vehicle in normal conditions. If the compass still appears to be inaccurate, a manual calibration may be necessary.

How do you calibrate a compass display on 2002 f250 diesel?