What transmission is in a 1985 Ford Ranger?
What transmission is in a 1985 Ford Ranger?
Ford Ranger Automatic Transmissions
| Model | Trans Code | Vehicle |
|---|---|---|
| C3 | V | 1983-1984 2WD Ranger |
| C5 | W | 1983-1984 4WD Ranger |
| A4LD | T | 1985-1994 Ranger With Overdrive |
| 4R44E | T | 1995-2000 4-Cylinder & 3.0L Rangers |
What kind of transmission does a Ford Ranger have?
All 2.8, 2.9, 4.0 V-6’s and transmissions are the same. keep flywheel, bellhousing, pilot bearing, throughout bearing, clutch release mechanism (s), flexplate, torque converter with the transmission. The only modification that will need to be done is to the floor plate.
Do you need a torque converter to replace a manual in a Ford Ranger?
If replacing a manual, the manual starter won’t work. You’ll need a longer one from an automatic. The C4 automatic transmission torque converter will work on a 4.0 factory auto flexplate engine. If replacing an automatic with a manual, you need a manual transmission computer to turn the MIL off.
What kind of transmission do I need for a Ford Mustang?
The most common transmission swap with older Fords is from a C4, C6, or FMX to an AOD or manual 5-speed. The focus here is putting a Ford AOD into a classic Mustang and other vintage Ford applications, which are the more common swaps.
Is the Ford Ranger the same as a Mustang?
All Ford 4.0L’s have the same bell housing pattern, even the Mustang 4.0’s. On the SOHC’s there is (1) bolt hole in the bell housing that will not line up with the blocks. Other than that, the others line up perfectly.
All 2.8, 2.9, 4.0 V-6’s and transmissions are the same. keep flywheel, bellhousing, pilot bearing, throughout bearing, clutch release mechanism (s), flexplate, torque converter with the transmission. The only modification that will need to be done is to the floor plate.
Can a 1985 Ford Ranger be converted to a 5.0L?
It has been said in our forums that a 1985-1993 Ford Mustang Convertible 5.0L engine mount will work for this conversion. Swap the mounts to opposite sides (Left-Right). The convertible engine mounts and hardtop engine mounts are not the same. The 5.0L Ford Mustang Convertible was actually built on a 4-cylinder Mustang chassis.
The most common transmission swap with older Fords is from a C4, C6, or FMX to an AOD or manual 5-speed. The focus here is putting a Ford AOD into a classic Mustang and other vintage Ford applications, which are the more common swaps.
If replacing a manual, the manual starter won’t work. You’ll need a longer one from an automatic. The C4 automatic transmission torque converter will work on a 4.0 factory auto flexplate engine. If replacing an automatic with a manual, you need a manual transmission computer to turn the MIL off.
