What was the horsepower of a 1993 Ford Ranger?

Horsepower dropped in 1994 for the 2.3- and 3.0-liter engines, to 98 and 140, respectively. A year later they rose again, to 112 and 145. For ’97, the 4.0-liter V6 was provided with a 5-speed OD automatic in place of the previous 4-speed OD unit in an effort to give the Ranger better low-speed acceleration.

When did I buy a 1994 Ford Ranger?

I bought this Ranger 2.3L new in 1994. Now I have 360K miles with original engine and transmission. No major issues throughout the years, just regular maintenance. The car has its 3rd water-pump, 3rd Read full review The 1994 Ford Ranger has not been tested. Like what you see? Find the best deal on a Ford Ranger today.

What kind of engine does a Ford Ranger have?

SuperCabs could have an optional pair of fold-down rear jump seats. Engines were the same as before: a 2.3-liter four, and 3.0- and 4.0-liter V6s. Five-speed manual transmissions were standard and 4-speed automatics optional. For 1994, an extended-cab (SuperCab) Splash joined the regular-cab lineup.

What kind of transmission fluid does a 1994 Ford Ranger use?

1994 Ford Trucks RANGER Transmission Fluid Using a properly formulated transmission fluid for your Ford Trucks RANGER can protect your vehicle from costly problems down the road. AMSOIL transmission fluids offer the best protection for your RANGER, even in the most severe driving conditions.

What’s the gas milage on a Ranger 4 cyl?

It’s the 2.3 4cyl. 5 speed manual. Truck has only had 3 oil changes done, brakes once, and maybe an air filter. No other problems with the truck, it runs like a champion. Getting around 24 mpg on highway, maybe 20 on city streets, but again the truck isn’t totally in tune.

How many miles does a Ford Ranger get?

3,421 Ford Rangers have provided 50.2 million miles of real world fuel economy & MPG data. Click here to view all the Ford Rangers currently participating in our fuel tracking program.

What’s the gas mileage on a 2002 Ford Ranger?

I’m trying to justify purchasing 2002 Ford 4 Cyl 5sp regular Cab, the sticker has 24 /28 mpg but would like to find out actual gas mileage, and also if the 4 Cyl is peppy enough. I had a Toyota R22 4 Cyl P/U that had plenty of power for my needs. I own a 1993 Ford ranger, 2.3l 4spd automatic with just under 140,000 miles.

3,421 Ford Rangers have provided 50.2 million miles of real world fuel economy & MPG data. Click here to view all the Ford Rangers currently participating in our fuel tracking program.

Which is the best Ford Ranger to buy?

Ranger remained one of the best in its class, but we recommend that you shop all three domestic brands–including the Dodge Dakota and Chevrolet S-Series–before deciding. Ford restyled its compact pickups for 1993.

Are there 4 cylinder motors in a Ford Ranger?

We have developed a series of assemblies (including strokers) for 4 cylinder Ford motors (2.3, 2.5 & stroker Ford 4 cylinders for oval track/mini stock). Racer Walsh carries numerous 2.0 and 2.3 parts. Check them out for a variety of Ford 4-cylinder parts.

What’s the compression ratio on a Ford Ranger?

The 1994 to 1997 engines had a 9.4-to-1 compression ratio. The engine was carbureted through 1984, and then switched to a multiport electronic fuel-injection system in 1985. In the 1983 Ford Rangers, the horsepower was only rated at 79, but it climbed to 82 in 1983, 100 in 1989 and finally 112 horsepower in 1996.

What are the specs of a 1994 Ford Ranger?

Detailed features and specs for the Used 1994 Ford Ranger including fuel economy, transmission, warranty, engine type, cylinders, drivetrain and more. Read reviews, browse our car inventory, and more.

What kind of engine does a 1996 Ford Ranger have?

The base 4-cylinder engine jumped from 98 to 112 horsepower, and extended-cab models could be fitted with a power driver’s seat. 1996 Ranger Pickup. An optional passenger-side airbag was added for ’96, complete with a key-operated disabling switch–a “first” in the industry.

What was the horsepower of a 1983 Ford Ranger?

The engine was carbureted through 1984, and then switched to a multiport electronic fuel-injection system in 1985. In the 1983 Ford Rangers, the horsepower was only rated at 79, but it climbed to 82 in 1983, 100 in 1989 and finally 112 horsepower in 1996. Its top torque rating was 135 foot-pounds.

Ford Ranger 3.0L V-6 Engine Displacement (Cubic Inches) 183 CID Block Cast Iron 60º V-6 Type Over-head Valve Engine Bore x Stroke 3.50 x 3.14

Why are there NO BRAKES ON MY 1993 Ford Ranger?

Initially there were a host of issues but Ford’s engineering made the problems easy to fix. The previous owner had installed the rear shoes out of order causing the truck to not have rear brakes or emergency brakes.

How big is the crankshaft on a Ford Ranger?

Ford Ranger 3.0L V-6 Crankshaft Pulley Bolts 107 ft-lbs Flywheel to Crankshaft Bolts 59 ft-lbs Upper Intake Manifold / Throttle Body 19 ft-lbs Exhaust Manifold 19 ft-lbs

When did the Ford Ranger get a V6?

The Ford Vulcan V6 is a 3.0L, 60° V6 engine, first introduced for the 1986 model year and originally designed to be the optional engine in the Ford Taurus and Mercury Sable. In 1991 it became available in the Ford Ranger where it replaced the Cologne 2.9 engine (which it is not related to) as the base V6 in the Ranger

What kind of OD does a Ford Ranger have?

For ’97, the 4.0-liter V6 was provided with a 5-speed OD automatic in place of the previous 4-speed OD unit in an effort to give the Ranger better low-speed acceleration. 1. Rangers with the 4.0-liter V6 switched from a 4-speed to a 5-speed automatic for ’97.

When was the third generation of Ford Ranger?

Third generation (1998–2012) In 1997 for the 1998 model year, the Ranger got a major update to the same body design, by giving it a longer wheelbase and a 3-inch (76 mm) longer cab for the regular cab models (part of which provided more room in the interior). The 1995 to 1997 model year interior look was retained.

What kind of automatic transmission does a Ford Ranger have?

A4LD – The C3 was modified into the A4LD 4-speed automatic by adding an overdrive gear, which the C3 lacked. This was the first Ford automatic to use an EEC-controlled torque converter lock-up clutch. Electronic shift control for the 3–4 shift was later added, another first, though other gears remained hydraulic.

What kind of mpg does a Ford Ranger get?

A 4.0 should perform most tasks with relative ease, and it works well with the automatic to furnish prompt passing power. We averaged 16.5 mpg in a 4WD Splash SuperCab with the 4.0-liter V6.

When did the Ford Ranger Super Cab come out?

There were some upgrades to the Ford Ranger transmission in 1985 with the five-speed manual becoming the standard feature on trucks. Ford did not introduce major changes in the Ford Ranger design until 1986. During this time, Ford launched what was to be known as the Super Cab, an expansion of the truck’s body-style.

When did the Ford Ranger get a new engine?

In 1998, 2.3Liter engine was replaced by a larger 2.5Liter four-cylinder engine with 117hp capacity. This replacement made the pickup truck a little bit more environmental-friendly.

What kind of transmission does a Ford Ranger have?

Five-speed manual transmissions were standard and 4-speed automatics optional. For 1994, an extended-cab (SuperCab) Splash joined the regular-cab lineup. Starting this year, Mazda dealers began to sell a variant of the Ranger as the B-Series.

A 4.0 should perform most tasks with relative ease, and it works well with the automatic to furnish prompt passing power. We averaged 16.5 mpg in a 4WD Splash SuperCab with the 4.0-liter V6.

What was the shift control on a 1995 Ford Ranger?

Electronic shift controls went into a new automatic for 1995, which also gained an interlock that prevented shifting out of “park” until the brake was applied. Touch Drive on-demand 4WD, standard on 4x4s, is not for use on dry pavement.

When did the Ford Ranger get a 4.0L engine?

Ranger Buyers Guide. The 4.0L OHV (Over Head Valve) V-6 engine found its way in to the Ford Ranger in 1990 and ultimately replaced the 2.9L V-6.

What are the specs of a 1993 Ford Ranger?

The table below shows all 1993 Ford Ranger specs by style, including MPG (fuel economy), transmission details, and interior and exterior dimensions. Additionally, find 1993 Ford Ranger warranty and reliability information, such as limits on bumper-to-bumper coverage and major components. 16.3 gal. 16.3 gal. 16.3 gal. / 19.6 gal. 16.3 gal.

Ranger Buyers Guide. The 4.0L OHV (Over Head Valve) V-6 engine found its way in to the Ford Ranger in 1990 and ultimately replaced the 2.9L V-6.

Where was the 1993 Ford Ranger last serviced?

Last serviced in Eureka, MO on 05/13/21 • Vehicle serviced • Steering/suspension checked • Brakes serviced • Brake fluid flushed/changed • Safety inspection performed. No accident or damage reported to CARFAX. 1st owner purchased on 08/05/93 and owned in CO until 03/16/18 • 2nd owner purchased on 03/16/18 and owned in CO until .

Which is the best starter for a Ford Ranger?

Not only do our top-of-the-line starters for Ford Ranger keep you from finding yourself stranded somewhere with a dreaded dead battery, but they also deliver a 12-volt boost to your engine, which is essential for reliable starting.

Why does my Ford Ranger crank no start?

In this video we cover some basics on finding the cause for a crank no start on a Ford Ranger. Many Ford vehicles have the same ignition and fuel design. I eventually trace the issue to a defective inertia switch, causing an electrical issue not allowing the fuel pump to run. Thanks for watching!

Is the 1993 Ford Ranger a good car?

Instead: I own a 93′ ford ranger xlt 2door extended cab. i havent found a thing wrong with it. the truck runs good after 11 years!!! I would suggest it as a first car for anyone.

How many miles does a 1992 Ford Ranger drive?

1st owner drove an estimated 5,701 miles/year • 2nd owner drove an estimated 0 miles/year • 3rd owner drove an estimated 9,459 miles/year • 4th owner drove an estimated 0 miles/year • 5th owner drove an estimated 0 miles/year • 6th owner drove an estimated 0 miles/year • 7th owner drove an estimated 0 miles/year.

When did the Ford Ranger 2.3 come out?

The 2.3 first debuted in the 1974 Pinto using a progressive 2bbl Weber/Holley carburetor and a points distributor. In 1975 they were upgraded to a Duraspark ignition system. They remained unchanged until about 1981 when the intake ports were changed from an oval to a ‘D’ shape (flat floor).

Engine Type 2.2-litre TDCi 130 PS/96 kW 2.2-litre TDCi 160 PS/118 kW 3.2-litre TDCi 200 PS/147 kW

How does the engine control computer work on a Ford Ranger?

Reduced emissions, ideal fuel mixture, easy ignition and variable cam timing all rely on a properly functioning ECM. The Ranger engine control computer is designed to work seamlessly with your truck’s sensors for maximum efficiency and performance.

Why does my 2.3L Ford Ranger have one dead cylinder?

In other words: If the engine is misfiring, the engine is simply not firing on all cylinders. Now, since the 2.3L Ford engine is a four cylinder, having just one ‘dead’ cylinder will cause an impact on engine performance and you’re gonna’ definitely feel it as you’re driving down the road or stopped at a traffic signal.

When did the Ford Ranger 2.3L come out?

ECCPP Electric Fuel Pump Module Assembly w/Sending Unit Replacement for Ford Ranger Mazda B2300 1990 1991 1992 1993 1994 1995 1996 1997 L4 2.3L V6 4.0L E2106S 4.1 out of 5 stars65 $57.64$57.64

What kind of gaskets do Ford Ranger 2.3L have?

SCITOO Compatible with Cylinder Head Gasket Kits fit 95-98 for Ford for Mazda B2300 Ranger 2.3L 2.5L 8v SOHC Engine Cylinder Head Gaskets Automotive Replacement Gasket Set 5.0 out of 5 stars5 $44.99$44.99

Ford’s new 2.3L I-4 (Mazda designed) is a very sophisticated engine. I say you should test drive one and notice the refinement and sophisication of it is light years ahead that what you will feel in the 3.0L Vulcan V-6.

How long can a Ford Ranger go without a battery?

Sometimes the truck can go for a week without a problem and then you try to start it and it clicks twice like a dead battery and other times it keeps cranking and I let go of the key and cranks until I turn the switch back to the off position. I wait about 3-5 minutes and it starts right up.

What to do if your Ford Ranger wont start?

Turn the steering wheel straight and immediately cranks. 97 people found this helpful. If the battery is fully charged and you try starting the truck and it only clicks the the starter relay is no good. If your looking from the front of your truck it will be located on the drivers side fender. It will have several wires going to it.

What’s the problem with my 1996 Ford Ranger?

I have a 1996 Ford Ranger, I changed my starter and starter relay, got a new battery but it still wont start. the lights and radio work just fine. it does make a clicking noise any idea what may be wrong? 221 people found this helpful. 34 people found this helpful.

Can a Ford Ranger start in the morning?

First thing in the morning start with one kick , but if you drive about 7 km and it comes to temperature and you switch the engine off , she will not start again until cooled down

Why does my Ford Ranger engine not start?

Hi guys, I have Ford ranger 2006 2.5 turbo diesel. It has stated a habit of not starting. Only cranks, emit smoke whilst cranking but won’t star. Injectors been replaced, battery normal, etc. Pls advise. Idler pulley broke while driving. After replacing the pulley the truck will crank but won’t start. Replaced coil packs, still no fire.

The Toyo Koygo seems to be the more common of the Ranger / Bronco II manual transmissions. The Mitsubishi has a bottom cover, a Mazda does not. Toyo-Koygo’s are more likely to be found in 4-cylinder 4×4 Rangers. Bronco II’s are more likely to be Mitsubishi FM145’s

What’s the problem with my 1991 Ford Ranger?

CAN GIVE IT ABOUT 1/3 PEDAL THEN AFTER IT DOESN’T WANT TO GO. WON’T SHIFT UP ETHER TILL I LET OFF THE PEDAL. NO LIGHTS OR WARNINGS. PUT ON TWO DIFFERAT SCANS BUT NOTHING long story short all other parts etc. good to go but still have problems with start up running to rich & give it more gas it will die! please help!

Detailed features and specs for the Used 1993 Ford Ranger including fuel economy, transmission, warranty, engine type, cylinders, drivetrain and more. Read reviews, browse our car inventory, and more.

What are the dimensions of a Ford Ranger?

1993-1997 Ford Ranger Vehicle Dimensions Regular cab short bed (6′) Regular cab long bed (7′) Extended cab Wheelbase, in. 107.9 113.9 125.2 Overall Length, in. 184.3 196.3 198.2 Overall Width, in. (excluding mirrors) 69.4 69.4 69.4 Overall Height, in. 64.3 64.3 64.3

Is there a 4.0 liter engine in a Ranger?

The 4.0-liter engine is an ideal engine swap for 2.9 and smaller Ranger engines since the 4.0-liter is available in the Rangers and Explorers. This will give you an idea of what is involved and is a condensed version of on an article printed in the October 1997 issue of Four Wheeler Magazine.

Mazda sold the Ford Ranger-based B-Series pickup from 1994 to 2009. The name of the Mazda pickup helps denote the engine under the hood. The Mazda B4000 was powered by a 4.0-liter V6. The 1994 Mazda B-Series pickup truck lineup also featured a 2.3-liter four-cylinder engine and a 3.0-liter V6.

How much does a 1993 Ford Ranger cost?

Ford Ranger 2WD Regular Cab $3,495 Ace Auto Sales Used 1993 Ford Ranger STX $4,900 Sterling McCall Chevrolet Used 1994 Ford Ranger 2WD SuperCab $3,000 Popular Imports Used 1994 Ford Ranger XL $4,699 Rich’s Car Corner Used 1996 Ford Ranger XL $5,991 Rocky Mount Toyota Used 1995 Ford Ranger 2WD SuperCab $6,490 Speedline Motors Used 1993

When did Mazda stop making the Ford Ranger?

If you thought the Mazda B-Series trucks looked an awful lot like the Ford Ranger from 1994 to 2009, you were right. The Mazda B-Series trucks were simply the Ford Ranger with different badges. Mazda sold the Ford Ranger-based B-Series pickup from 1994 to 2009.

What kind of car is a 2003 Ford Ranger?

Consumer Ratings Rank Vehicles HP #2 2004 Ford F150 (Heritage) Regular Cab 231 #3 2004 Ford F150 Regular Cab 231 #4 2003 Ford Explorer Sport Trac 210 #8 2003 Ford Ranger Regular Cab 143

How can I get more horsepower out of my Ford Ranger?

Have the camshaft replaced to increase the compression ratio. Crane cams, Compcams and Camcraft all offer camshaft upgrades for Ford Rangers. Have the air intake system upgraded. Better piping will reduce air resistance and improve engine performance. K&N’s cold air intake systems are best.

What kind of transmission does Ford Ranger XL have?

The transmission is a 10-speed automatic transmission with a tow/haul mode. The XL has a towing capacity of 7,500 pounds, and with the right configuration has a payload capacity of up to 2,080 pounds. The truck comes with rear-wheel drive as standard, but four-wheel drive is an option.

How many horsepower does a Ford Ranger have?

Horsepower capabilities on the Ranger have improved dramatically since the vehicle’s introduction. Initially, the vehicle came with an 80-horsepower, 2.3-liter four-cylinder engine. Each year’s models have steadily improved, with the 2009 Ranger offering a powerful 4.0-liter V6 engine with an impressive 207 horsepower.

How many miles does a 1997 Ford Ranger drive?

1st owner drove an estimated 8,664 miles/year • 2nd owner drove an estimated 0 miles/year • 3rd owner drove an estimated 0 miles/year • 4th owner drove an estimated 0 miles/year • 5th owner drove an estimated 0 miles/year • 6th owner drove an estimated 0 miles/year • 7th owner drove an estimated 0 miles/year.

How much fluid does a Ford Ranger have?

Here is a Ford Ranger Fluids and Capacities chart: ? 3.0 quarts (drain and refill) / 6.0 quarts with torque converter drain. Add more fluid as needed, 1/2 pint at a time. 3.0 quarts (drain and refill) / 6.0 quarts with torque converter drain.

Is the Ford Ranger m50d-r4 a manual transmission?

There is some confusion about these two transmissions and some believe they are one in the same. The M50D-R4 is said to bear no resemblance to the M50D-R1. The new model has a detachable bellhousing, a main case and extension housing, all made of aluminum.

When did the fifth generation Ford Ranger come out?

Since 2014 there has been an 83% increase in midsize pickup sales, and Ford’s convinced. The Ranger was rereleased in 2019. Though this is the fourth generation of Ranger in the United States, it is considered by many to be the fifth generation, since the Ranger continued to be sold from 2012-2018 in other countries outside of the United States.

What kind of drive does a Ford Ranger have?

Touch Drive on-demand 4WD, standard on 4x4s, is not for use on dry pavement. It has automatic-locking front hubs and allows shifting on the fly between 2WD and 4WD High, by pressing a dashboard button. Some Rangers have a floor-mounted transfer-case lever and manual-locking hubs, which was a credit option.

Where does the Ford Ranger engine come from?

The Vulcan was a clean-sheet design using the metric system. The engine block is built by Sherwood Metal Products, the intake comes from Ford’s Essex Casting, and the engine is assembled at Ford’s Lima Engine plant in Lima, Ohio. The Vulcan is a straightforward pushrod design, with 2 valves per cylinder. Bore is 3.504 in and stroke is 3.15 in.

The 4.0L OHV (Over Head Valve) V-6 engine found its way in to the Ford Ranger in 1990 and ultimately replaced the 2.9L V-6. This evolutionary redesign of the American 2.9L solved many of the reliability issues that plagued its predecessor. A beefier cylinder head design eliminated the 2.9L’s common failure of cracked heads.

When to replace automatic transmission on Ford Ranger?

Ford Ranger automatic transmission parts are key to this, and replacing them with durable components from AutoZone keeps your pick-up going for the long haul. If you’re seeing fluid leaks or you smell burning transmission fluid, then a Ranger automatic transmission repair is necessary.

When did the Ford Ranger get a Vulcan engine?

In 1991 it became available in the Ford Ranger where it replaced the Cologne 2.9 engine (which it is not related to) as the base V6 in the Ranger The Vulcan was a clean-sheet design using the metric system.

Where can I buy a 1994 Ford Ranger?

Used 1994 Ford Ranger Super Cab Pickup Prices | Kelley Blue Book See pricing for the Used 1994 Ford Ranger Super Cab Pickup. Get KBB Fair Purchase Price, MSRP, and dealer invoice price for the 1994 Ford Ranger Super Cab Pickup. View local inventory and get a quote from a dealer in your area.

Where are the fuses on a Ford Ranger?

The passenger compartment fuse panel is located on the drivers side (end) of the dash board. Not all of your fuses are in the panel under the dash.

This Ranger is priced $500 below Kelley Blue Book. BUY FROM AN AWARD WINNING DEALER: You’ll only find high quality used cars, trucks and SUVs at Lithia Ford of Klamath Falls. We offer Klamath Falls Oregon, Beatty OR and Tulelake California a great selection of second hand cars, used pickups and pre-owned SUVs from today’s leading manufacturers.

What kind of OD did Ford Ranger have?

For ’97, the 4.0-liter V6 was provided with a 5-speed OD automatic in place of the previous 4-speed OD unit in an effort to give the Ranger better low-speed acceleration. Avail. Trans. Avail. Trans.

What kind of car is a 1994 Ford Ranger?

Ford Ranger XL $5,991 Rocky Mount Toyota Used 1995 Ford Ranger 2WD SuperCab $6,490 Speedline Motors Used 1993 Ford Ranger 4×4 Regular Cab $7,000 Patriot Auto Sales Used 1994 Ford Ranger Splash $7,999 Siry Auto Group Used 1996 Ford Ranger 2WD Regular Cab $7,999 Roy Robinson Chevrolet Used 1994 Ford Ranger 4×4 SuperCab $12,991 Khodas Cars

How much does a 1995 Ford Ranger cost?

Ford Ranger XL $4,699 Rich’s Car Corner Used 1996 Ford Ranger XL $5,991 Rocky Mount Toyota Used 1995 Ford Ranger 2WD SuperCab $6,490 Speedline Motors Used 1993 Ford Ranger 4×4 Regular Cab

What was the wheelbase of a 1989 Ford Ranger?

For 1989, Rangers were restyled to resemble the bigger F-Series, and rear antilock brakes were installed on all models. SuperCab models had a 6-foot cargo box and 125-inch wheelbase. Regular-cab Rangers rode a 107.9-inch wheelbase with a 6-foot cargo box, or 113.9-inch with a 7-footer.

When did the Ford Ranger 4 wheel drive come out?

However, a four-wheeled drive version of the Ford Ranger was released in the autumn of 1982. The Ford Ranger was designed using inspiration from other truck models by Ford. Ford Rangers were manufactured with similar grille designs as trucks within the Ford F-Series, which are predecessors to the Ford Ranger.

The original Ford Ranger transmission options consisted of a three-speed automatic, four-speed manual and five-speed manual. The three-speed automatic and five-speed manual transmissions were also optional choices for buyers.

Is the Ford Ranger the truck for You?

If you don’t have a lot of hauling and towing to do, and you don’t have a big family that you need to drive around, the Ford Ranger might be just the truck for you. It’s small and compact, most women think it’s cute, and most guys know that it still has a lot to offer where horsepower and capabilities are concerned.

Is the 1994 Ford Ranger a good car?

Read full review The 1994 Ford Ranger has not been tested. Like what you see? Find the best deal on a Ford Ranger today. There are for sale near you. Certified child passenger safety technicians conduct hands-on tests of a car’s Latch system and check the vehicle’s ability to accommodate different types of car seats.

Where can I get a crankshaft kit for a Ford Ranger?

A Ford Ranger crankshaft kit from AutoZone brings life back to your engine and prepares you for any journey you need to make. A crankshaft kit for Ford Ranger is the solution to a better running engine.

What’s the horsepower of a Ford Ranger engine?

Required replacement of these parts is common in older engines. The 4.0L OHV engine was produced until 2000 and was used in the Ford Explorer and Ranger. Output was 160hp and 225 ft·lbf. Though there is some variation, typically 155hp is quoted as horsepower for 1990-1992 applications.

Is there a problem with my Ranger 4.0L engine?

Also, if you get a problem with hesitation, check the wires around the exhaust. One of the oxygen sensor wires may have been damaged by the exhaust. Loose Intake Manifold Bolts – Some 90’s 4.0L’s have a problem with loose intake bolts. Click HERE for more details. Performance Parts:

What kind of truck is a Ford Ranger?

The Ford Ranger is a solid small truck that can do a lot of work. You can get a sporty two-door Regular Cab (standard) or two- or four-door SuperCab (extended cab) with a longer wheelbase. 2009 Ford Ranger SuperCab.

When did the Ford Ranger switch to SOHC?

The SOHC 4.0 Usage: We know that the Ford Ranger switched from the OHV 4.0L to the SOHC 4.0L in 2001, but the Ford Explorer wasn’t as defined. The Ford Explorer actually started using the SOHC 4.0L in 1997 along with the OHV 4.0L. It wasn’t until 2001 that Ford completely dropped the use of the OHV 4.0L in the Explorer.

What was the horsepower of a 1993 Ford Ranger?