How do you remove the pilot bearing on a Ford Ranger?

How do you remove the pilot bearing on a Ford Ranger?

You have to purchase or rent a Pilot bearing removal tool from most part stores, Autozone, O’riley’s. It is a slide hammer with an attachment with little arms that you attach to the end. You stick the little arms all the way in the hole and grab the backside of the bearing. Slide the hammer and pull it out.

How do I remove a stuck pilot bearing?

All you need to do is insert the dowel, rod, or tool into the bore of the pilot bushing/bearing and give it a firm rap with a hammer. The hydraulic action will force the bearing out easier than you’d expect.

How do you replace a flywheel on an engine?

Remove these with a wrench, and then carefully remove the flywheel from the crankshaft by pulling it away. Put the replacement flywheel in its place and replace the retaining bolts, tightening them firmly.

How do you get a Mercury flywheel off a crankshaft?

Turn the socket wrench to the right until the flywheel comes off the crankshaft. If you cannot find a flywheel that is specific to a mercury you can use a universal flywheel puller. Do not strike the bolt in the center of the flywheel puller with a hammer or other object because you can damage the crankshaft.

How do you remove a nut from a flywheel puller?

Once the nut is loose remove the impact wrench and turn the flywheel nut by hand to remove it. Thread the flywheel puller onto the flywheel and tighten it with an adjustable wrench. Insert a socket wrench into the bolt on the flywheel puller. Turn the socket wrench to the right until the flywheel comes off the crankshaft.

When do you need to remove a flywheel from an outboard motor?

by Cameron Easey. The flywheel on an outboard will need to be removed when repairs are needed such as the motor not starting properly. In order to access the crankshaft of the motor the flywheel will need to be removed from the engine.