Easy tips

How much is an oil change for a Ford Focus?

How much is an oil change for a Ford Focus?

The average cost for a Ford Focus oil change is between $112 and $123. Labor costs are estimated between $42 and $53 while parts are priced at $70.

Does a 2010 Ford Focus have an air filter?

7 Answers. 17 people found this helpful. nope, there is no cabin filter on 2010 Ford Focus appears to be deleted. There is a rectangular box with a screen cover.

What type of oil does a 2010 Ford Focus take?

Engine Oil

Viscosity: 5W-20 (All TEMPS)
Capacity: 4.5 quarts (with filter)After refill check oil level.
Torque: 21 ft/lbs (Oil Drain Plug)

What oil can I use in my Ford Focus?

Ford Motorcraft® A5 5W-30 is suitable for use in vehicles that require a 5W-30 lubricant that Meets Ford’s WSS-M2C913-A, WSS-M2C913-B, WSS-M2C913-C, WSS-M2C913-D specification standards. Check your owner’s manual to see if this product is suitable for your vehicle.

How do you change the oil filter on a Ford Focus?

How do you change the oil filter on a Ford Focus. Oil sump plug torque setting is 21 lbf ft / 28 newton meters.

Where are the oil cartridges located in a Ford Focus?

Frequently, petrol engines use spin-on filters, but diesel use cartridges. Before change filter, prepare oil drain pan, latex or nitrile gloves and safety glasses to protect skin and eyes from hot oil! Spin-on oil filters located in the bottom of the engine oil pan. Cartridge oil filers you can find on the top right side of the engine.

What kind of oil does a Ford Focus use?

Do not use the vehicle’s spare wheel jack. * Oil, preferred viscosity is 5w30 for most environments. The Ford specification is semi-synth, you can use full synthetic if you wish. Amazon links: * Replacement filter of the correct size. The Mahle product used in the video is their model OC 606, other brands are fine too. Amazon links:

What kind of oil filter do I Need?

Oil filters are divided by construction into cartridge and spin-on types. In the table above, you can get part number and check out what type fit for your engine. Frequently, petrol engines use spin-on filters, but diesel use cartridges.

Frequently, petrol engines use spin-on filters, but diesel use cartridges. Before change filter, prepare oil drain pan, latex or nitrile gloves and safety glasses to protect skin and eyes from hot oil! Spin-on oil filters located in the bottom of the engine oil pan. Cartridge oil filers you can find on the top right side of the engine.

How do you change the oil filter on a Ford Focus. Oil sump plug torque setting is 21 lbf ft / 28 newton meters.

If your Focus is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Focus. Most Fords have the oil type printed on the oil cap – it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40.

Oil filters are divided by construction into cartridge and spin-on types. In the table above, you can get part number and check out what type fit for your engine. Frequently, petrol engines use spin-on filters, but diesel use cartridges.

Author Image
Ruth Doyle