Can you replace the clockspring on a Chevy Cobalt?
Can you replace the clockspring on a Chevy Cobalt?
The clockspring allows for a continuous electrical connection to the airbag, horn and cruise control. When the airbag light remains illuminated, replacing the clockspring may extinguish it. Straighten the wheels of your Chevy Cobalt by turning the steering wheel to its neutral position. Turn the ignition off and remove the key.
How does a clock spring work on a car?
Clock spring (clockspring) is a device that contains a wound-up wire (ribbon cable) inside and allows the airbag, horn, and steering wheel buttons to stay connected as the steering wheel is rotated as you turn the steering wheel left and right.
Can a damaged clock spring cause an airbag not to deploy?
The driver’s airbag may not deploy if the SRS or airbag light is on due to a damaged clock spring, resulting from normal usage over time. The driver’s airbag circuit will trigger a high resistance fault code, potentially causing the driver’s airbag not to deploy if involved in an accident.
Can a clock spring be replaced on an Acura TSX?
In this video, the clock spring is replaced on a 2005 Acura TSX, but is however the same procedure as a Honda Civic, Accord, Passport, Pilot, Element, CR-V, Odyssey and Acura EL, TSX, TL, TLX, RDX, NSX and MDX. The airbag must be removed, wires disconnected and then the steering wheel must be removed.
The clockspring allows for a continuous electrical connection to the airbag, horn and cruise control. When the airbag light remains illuminated, replacing the clockspring may extinguish it. Straighten the wheels of your Chevy Cobalt by turning the steering wheel to its neutral position. Turn the ignition off and remove the key.
When to replace the clock spring in a car?
Since the clock spring is responsible for two safety devices including the horn and airbag safety system it is highly advised to replace the clock spring with a new unit as soon as possible.
How does an airbag clock spring work in a car?
An airbag clock spring is used to connect the steering wheel to other electrical devices such as the airbag safety system, radio volume and station selections, horn and cruise controls. This is done using a series of small wires wound between an upper and lower plate which is mounted between the steering column and the steering wheel.
Is it safe to drive with a bad clock spring?
A bad clock spring can also intermittently blow fuses as the car is driven. Is it Safe to Drive? Since the clock spring is responsible for two safety devices including the horn and airbag safety system it is highly advised to replace the clock spring with a new unit as soon as possible.
