How to replace the lower ball joint on a Ford F150?

Want to replace the lower ball joint on your two-wheel Ford F150? It’s easy! So easy, in fact, that this repair video can present a complete, step-by-step overview of the process in about 13 minutes. For all of the details, and to get started yourself, take a look!

How much does it cost to replace a ball joint?

The good news is that replacing upper or lower ball joints is a very easy task that requires only a moderate level of skill and basic tools. Purchasing new upper and lower ball joints will cost around $250-$350.

Can a bad ball joint cause uneven tire wear?

This article applies to the F-150 (2004-2014). Bad upper or lower ball joints can make a terribly annoying noise or cause uneven tire wear at best, and at worst they have a dangerous effect on your ability to steer your truck.

How much does it cost to replace a suspension joint on a Ford F-150?

The average cost for a Ford F-150 suspension ball joint replacement is between $255 and $301. Labor costs are estimated between $178 and $225 while parts are priced at $77. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

How to replace a lower control arm ball joint?

Replacing a Lower Control Arm Ball Joint. Learn how to replace a lower ball joint by pressing it out of the control arm and pressing the new one back in. To watch the longer, in depth version, click the link below. Press out a Ball Joint (In-depth):

How much does it cost to replace a ball joint?

How much does a ball joint replacement cost?

Ball Joint Replacement (Front) Estimate for Ford F-150 Ford F-150 Ball Joint Replacement (Front) costs $295 on average.

How to replace the lower control arm and lower ball joint?

Remove the C-clip from the upper side of the bottom ball joint using needle nose pliers. Use the ball joint press with the correct collets to push the old ball joint down through the lower control arm. Use the ball joint press with the correct collets to push the new ball joint up through the lower control arm.

How to replace the front ball joint on a Chevy Silverado?

Remove the wheels. Remove the control arm (s). Remove and replace ball joints. Check the entire suspension system for any problems. When applicable, make sure the ball joints are lubricated during a major service. What common symptoms indicate you may need to replace the Ball Joint Front?

How do you replace a ball joint on a Ford F150?

Place a jack under the control arm and remove the 24mm nut at the bottom of the lower ball joint – you may need a breaker bar or length of pipe for leverage. Next, you should be able to separate the upper wishbone control arm. It’s held in place with a 21mm bolt at the bottom of the upper ball joint.

Ball Joint Replacement (Front) Estimate for Ford F-150 Ford F-150 Ball Joint Replacement (Front) costs $295 on average.

Do you need to replace a ball joint on a Dodge Dakota?

The vehicle may need to be taken to a shop for wheel alignment after this service. Mobile mechanics do not have the machinery to align wheels. Remove the wheels. Remove the control arm (s). Remove and replace ball joints. Check the entire suspension system for any problems.

How to replace front lower ball joint 97-04 Chevy S10?

Before lifting the car, loosen the lug nuts up with a 19 mm wrench, and the hub nut using a 35 mm socket. It’s best to do this while the car is on the ground so the wheels won’t move. Position the jack under the control arm with a jack stand under the frame.

How to install front lower ball joint in Jaguar?

Courtesy of JAGUAR CARS, INC. Tighten nut of special tool 204-114 to full extent, to achieve suspension mid-laden position. Raise front of vehicle and support on stands. Remove appropriate road wheel. Remove and discard tiestraps securing wheel speed sensor harness to upper wishbone. Courtesy of JAGUAR CARS, INC.

How to prevent damage to lower ball joint?

To prevent damage to lower ball joint, secure vertical link to road spring using strong wire. Courtesy of JAGUAR CARS, INC. Remove upper wishbone fulcrum nut and bolt and withdraw wishbone from vehicle.

How do you check for lower ball joint replacement?

To check for ball joint play, lift the vehicle on jack stands and wiggle the wheels up and down. Pay attention to where the lower ball joint meets the lower control arm. If there is slight play, the ball joint is worn and should be replaced.

Can you replace the lower ball joint on a Honda?

This is a safety issue. Replacing the ball joint requires complete removal of the front steering knuckle. It is held in by the upper and lower ball joints, tie rod, CV axle as well as the brakes and ABS wire. Be careful not to damage the ABS wire when removing the knuckle, they often get rusted in.

How do you remove the ball joint from a lawn mower?

Removing the Old Ball Joint Pull the cotter pin and loosen the large castellated nut. The top should look like a crown, or castle, at the bottom. Pop loose the ball joint. The goal is to try to guide it through the hole in the upper half of the steering knuckle. Remove the allen bolts and slide the control arm free.

What happens if you don’t replace your ball joint?

If you don’t get the ball joint replaced soon, it will get louder and eventually break off completely. One sign of a lower ball joint that has failed that people don’t often consider is uneven tire wear.

Can you replace the ball joint on a 2000 Ford Ranger?

OVERVIEW: Instructions on replacing the upper and lower ball joints on a 2000 Ford Ranger 2WD with coil spring suspension. The Ford factory service manual does not have a procedure for replacing the upper ball joint. The factory indicates that the whole upper control arm is changed as an assembly with the ball joint included.

How do you know if ball joints need to be replaced?

Inspect the ball joints to make sure they need to be replaced. Figure out if your vehicle’s got a strut-style suspension or a control arm, then check the ball joint by either jacking up the control arm near the ball joint to check for wheel play, or by jacking up the car and using a pry-bar to check for wheel play in a strut-style suspension.

What happens when a car’s ball joints wear down?

The ball joints allow the suspension of your vehicle to move up and down, while at the same time allow the wheels to turn left and right. Over time, a car’s ball joints may wear down. If a ball joint starts to loosen, you’ll hear clunking sounds from the front as the joint rattles in the socket.

How much does it cost to replace a ball joint on a Ford Explorer?

Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Ford Explorer Ball Joint Replacement (Front) costs $307 on average. What is the Ball Joint Front all about?

How to replace the front ball joint on a Chevy Silverado?

What happens when a front ball joint fails?

Should a ball joint break, the wheel becomes totally free to move in any direction, which can damage the car’s fender, tire, and several suspension components, if not more. Usually, when front ball joints start to fail, the vehicle will display a few symptoms that alert the driver a problem has occurred.

How to replace a steering knuckle hole in a soccer ball?

Guide the new joint through the knuckle hole. Slide the new rubber boot over the ball joint’s stud and guide the new ball joint back up through the steering knuckle hole, where it came from. 2 Bolt the joint into place using the hardware included.

How can I check the ball joint on my car?

Figure out if your vehicle’s got a strut-style suspension or a control arm, then check the ball joint by either jacking up the control arm near the ball joint to check for wheel play, or by jacking up the car and using a pry-bar to check for wheel play in a strut-style suspension.

How do you install a ball joint on a Ford F150?

Remove the single bolt on the ABS sensor. Remove upper ball joint nut and use hammer on the stem end or spindle arm until the ball joint pops out. Push the upper control arm down to get new ball joint in place. Install upper castle end nut. Figure 6. Remove the upper ball joint nut. Remove steering tie-rod end nut, and free from spindle.

How much does it cost to replace a Ford Super Duty ball joint?

It runs from $800.00 on the low side up to about $1500.00 if done by a repair shop or dealer. If you do it yourself it will cost about $300.00. How long does it take to replace the ball joints?

What’s the best way to replace a ball joint?

Screw in the new grease fitting and pump grease into the assembly. If you removed the brake or wheel, reattach them and lower the vehicle back down to test out the action. Bleed the brakes, if necessary. It’s a good opportunity to do any other repairs you might need to do with the brakes, since you’ve got them off.

Why are ball joints important in front suspension?

The upper and lower ball joints are a critical part of any vehicle’s front suspension. They are a large bearing that’s like a ball-and-socket joint and allow for suspension travel while steering. Ball joints support the vehicle’s weight, and without them, the suspension would literally collapse and drop to the pavement.

If you want the basic parts for a do-it-yourself ball joint replacement, it may cost around $35 to $75 per ball joint or $130 to $300 for four.

How much does it cost to repair ball joints?

There are also two joints per each wheel. If you want the basic parts for a do-it-yourself ball joint replacement, it may cost around $35 to $75 per ball joint or $130 to $300 for four. If you want the basic parts for a do-it-yourself ball joint replacement, it may cost around $35 to $75 per ball joint or $130 to $300 for four. If you own a high-end or luxury vehicle, it can cost you more.

What are upper ball joints?

Ball joints are ball-and-socket joints in the front suspension that serve as the pivot points between the wheels and suspension of your vehicle. On each side, the lower ball joint is pressed into and rests in the lower control arm, while the upper ball joint rests in the upper control arm.

What’s the difference between upper and lower ball joints?

1. Premium Polychloroprene Sealed Boot w/ Grease-Relief Valve: 2. Powdered-Metal Gusher Bearing Technology: 3. Full-Ball Hardened Stud w/ Grease Grooves: 4. One-piece Forged Housing: 5. Belleville Washer Pre-Load: 6. Greaseable Design: 7. Pressed-in Patented Cover Plate Design loading… loading…

Why are the ball joints in the front of the car important?

Just like the ball socket of your hip, they serve as one of the main pivot points connecting the control arms of the vehicle to the steering knuckle. The ball joints in the front allow the front wheels and suspension to move back and forth in addition to up and down when the vehicle is responding to surface changes on the road.

When to replace the ball joint in a Ford F150?

Give your truck the best components to ensure that it performs at 100% capacity. An F150 ball joint replacement safeguards you against old, broken ball joints which render your truck inoperable.

How to replace the lower ball joint on a Ford F150?