How do you replace a door lock actuator on a Ford F150?
How do you replace a door lock actuator on a Ford F150?
Remove the two bolts on the bottom of the door panel, then pry off the trim piece in the front middle section (over the door speaker). Remove the bolts holding the speaker in place, pull it out, and disconnect the harness on the back. Pry off the door switch assembly and disconnect the harness on the back.
What to replace front door handle on 2003 Ford F-150?
Ford F-150 2003, Front Exterior Door Handle by Replace®. Material: Plastic. With Keyhole. Put your vehicle back in top shape and replace your exterior door handle with the high quality and affordable price of Replace products. Designed…
What kind of lock switch does a 2003 Ford F-150 have?
Ford F-150 2003, Front Driver Side Door Lock Switch by Standard®. Terminals Type: 7 Blade Male Terminals. SMP’s vision is to be the leading independent supplier to the automotive aftermarket, providing the highest quality products,…
How do you change the lock on a Ford F150?
Push in on the clip near the bottom of the door using a screwdriver to release it. Pull the entire lock mechanism up and guide it out of the door. Unplug the harness from the mechanism and use a screwdriver to push out the clips holding the actuator to the mechanism, then pull it off. Figure 13. Release the clip holding the mechanism in place.
Remove the two bolts on the bottom of the door panel, then pry off the trim piece in the front middle section (over the door speaker). Remove the bolts holding the speaker in place, pull it out, and disconnect the harness on the back. Pry off the door switch assembly and disconnect the harness on the back.
How do you replace a power door lock actuator?
Remove the three T25 bolts that hold the latch assembly in place. Rotate around window rail. Remove wires from door lock actuator and the door closed sensor. Notice lock rod is rotated to right. The door close sensor plug (purple) is very close to actuator, but does not have to be moved.
Push in on the clip near the bottom of the door using a screwdriver to release it. Pull the entire lock mechanism up and guide it out of the door. Unplug the harness from the mechanism and use a screwdriver to push out the clips holding the actuator to the mechanism, then pull it off. Figure 13. Release the clip holding the mechanism in place.
Why are my Ford F-150 door locks not working?
To my shock, Ford thought it would be a great idea to save us from ourselves by putting a substandard thermal barrier in the door lock motor to keep the motors from “burning up”. Well, this barrier is designed to save the motor in the event the door locks are played with by the small gremlins that sometimes live in our trucks.
Remove the three T25 bolts that hold the latch assembly in place. Rotate around window rail. Remove wires from door lock actuator and the door closed sensor. Notice lock rod is rotated to right. The door close sensor plug (purple) is very close to actuator, but does not have to be moved.
To my shock, Ford thought it would be a great idea to save us from ourselves by putting a substandard thermal barrier in the door lock motor to keep the motors from “burning up”. Well, this barrier is designed to save the motor in the event the door locks are played with by the small gremlins that sometimes live in our trucks.
