What are the brake calipers on a 1967 Corvette?
What are the brake calipers on a 1967 Corvette?
Those for 1967 are 5452270, 5452273, 5452281, and 5452284. Caliper piston seal wear was another issue, due to excessive rotor run-out. One more malady that plagued the early design calipers was corrosion of the caliper piston seal surface. When calipers leaked (and they all did) expensive housing replacement was required.
Are there front disc brakes on a 1965 Corvette?
The 1965 Corvettes have front disc brakes as standard equipment. Disc brakes on the Midyear Corvette are not perfect. Like any new product, problems surfaced. In spite of a few issues, General Motors used the same style caliper in place on all Corvettes until 1982.
Are there self adjusting brakes on a midyear corvette?
Another first for the Midyear were self-adjusting front brakes on the ’63 to ’64, and rear brakes were self-adjusting from 1963 to 1965. When applying the brakes in reverse, a lever pivots off the secondary brake shoe and turns the adjuster wheel one position. The system worked well for those who came to a full stop.
What was the hydraulic system on a midyear corvette?
Early Midyear brake hydraulic systems were very simple: A single master cylinder actuated all four brake assemblies. Wheel cylinder piston diameter and brake shoe width determined the drum brake system balance. Wider brake shoes and wheel cylinders with a larger diameter were used up front for greater braking power, due to weight distribution.
Those for 1967 are 5452270, 5452273, 5452281, and 5452284. Caliper piston seal wear was another issue, due to excessive rotor run-out. One more malady that plagued the early design calipers was corrosion of the caliper piston seal surface. When calipers leaked (and they all did) expensive housing replacement was required.
The 1965 Corvettes have front disc brakes as standard equipment. Disc brakes on the Midyear Corvette are not perfect. Like any new product, problems surfaced. In spite of a few issues, General Motors used the same style caliper in place on all Corvettes until 1982.
Another first for the Midyear were self-adjusting front brakes on the ’63 to ’64, and rear brakes were self-adjusting from 1963 to 1965. When applying the brakes in reverse, a lever pivots off the secondary brake shoe and turns the adjuster wheel one position. The system worked well for those who came to a full stop.
Early Midyear brake hydraulic systems were very simple: A single master cylinder actuated all four brake assemblies. Wheel cylinder piston diameter and brake shoe width determined the drum brake system balance. Wider brake shoes and wheel cylinders with a larger diameter were used up front for greater braking power, due to weight distribution.
What kind of brakes did a midyear Corvette have?
Midyear Corvettes went through many brake system changes. Production began with drum brakes, which were similar to those on first-generation, solid- axle Corvettes. Brake fade or loss was typical when drum brake systems became wet or excessively hot.
What are the front caliper casting numbers for a corvette?
This is a 1973-1982 front caliper casting number. Casting numbers for 1965–1966 are 5465954, 5465952, 5465902, and 5465905. Those for 1967 are 5452270, 5452273, 5452281, and 5452284. Caliper piston seal wear was another issue, due to excessive rotor run-out.
How does the master cylinder in a corvette work?
The master cylinder is mounted at an angle in the car so air bubbles can get trapped in the highest point of the bore… so try to level it to prevent this.
This is a 1973-1982 front caliper casting number. Casting numbers for 1965–1966 are 5465954, 5465952, 5465902, and 5465905. Those for 1967 are 5452270, 5452273, 5452281, and 5452284. Caliper piston seal wear was another issue, due to excessive rotor run-out.
