How do you check gear ratios?
How do you check gear ratios?
Count the number of teeth on the pinion gear and count the number of teeth on the ring gear. Divide the ring gear teeth number by the number of teeth on the pinion. The result is your gear ratio.
How can you tell the axle ratio of a Ford truck?
There’s no question, the easiest way to identify the axle and gear ratio in your truck is from the door sticker. If you open the drivers door and look at the door jamb, you’ll see a sticker like the one shown below:
Where do you find the Axle code on a Ford truck?
Identify Your Ford Truck Axle From The Door Sticker. There’s no question, the easiest way to identify the axle and gear ratio in your truck is from the door sticker. If you open the drivers door and look at the door jamb, you’ll see a sticker like the one shown below: You’ll see that the area labeled (F) is for the Axle Code.
How to find axle ratio on a Ford Raptor?
F150 Truck Axle Code Guide; 3.15 = 15 or L5: 3.31 = 27 or L3: 3.55 = 19, H9 or L9: 3.73 = 26, B6 or L6: 4.10 = L4
What is the Axle code for a 2004 Ford Excursion?
2004 Ford Super Duty Axle Codes: 31 — 3.73 non-limited slip, F-250/Excursion 32 — 4.10 non-limited slip, F-250 41 — 3.73 non-limited slip, F-350
What is the axle ratio on a Ford Ranger?
So looking at the axle tag above, you can see it’s a 3.73 gear ratio in a 7.5 inch axle. And looking at the axle tag above, you can see it’s a 3.73 gear ratio with a limited slip in a 8.8 inch axle. Rear axle codes can be found on the Safety Standard Certification label attached to the left drivers side door lock post.
Where do you find the axle size on a Ford?
You can identify which axle you have by the tag attached to the inspection cover. Looking at that tag, you can see the gear ratio stamped on the lower left, and the axle size (ring gear diameter) stamped in the bottom middle.
F150 Truck Axle Code Guide; 3.15 = 15 or L5: 3.31 = 27 or L3: 3.55 = 19, H9 or L9: 3.73 = 26, B6 or L6: 4.10 = L4
Where is the rear axle code on a Ford?
Rear axle codes can be found on the Safety Standard Certification label attached to the left drivers side door lock post. The code appears as a number or letter/number combination in the ‘Axle’ column of the label.
