Why does my Ford Explorer not turn on?

There are really two main ways that a vehicle will not start. The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your Explorer won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.

Why does my Ford 4.0L not turn over?

No Crank Condition The engine does not turn over when you turn the key to start your Ford vehicle. This is usually due to: Failed starter motor. Failed neutral safety switch. Failed ignition switch. Locked up engine.

What does it mean when your car says no start?

In a no crank condition, the engine is not cranking when you turn the key to crank the engine. In other words, you turn the key and nothing happens since the engine won’t turn over. This usually due to a bad starter motor or a bad starter motor solenoid. Remember this article only deals with a no start condition.

Why does my car not start when I turn the key?

In other words, you turn the key and nothing happens since the engine won’t turn over. This usually due to a bad starter motor or a bad starter motor solenoid. Remember this article only deals with a no start condition.

Why does my car engine not want to start?

If the engine still doesn’t seem like it wants to start, probably fuel is getting into the cylinders and your problems lies somewhere else. However, if the engine runs momentarily and dies, then the problem is that fuel is not getting to the cylinders. Check for a clogged fuel filter, or a bad fuel pressure regulator.

Why does my car not turn over when I turn the key?

What makes a Ford 4.0L engine not start?

This tutorial is geared toward a Cranks but Does Not Start Condition. To successfully troubleshoot the cause of the no start condition of your Ford 4.0L equipped car or mini-van, you need to know that there are three very basic components the engine needs to start and they are: Air. Fuel.

What causes a car to have no start?

The engine pistons and cylinder head valves (and all the other related components like: timing chains, etc.) are the ones responsible for the induction of the fresh air the engine needs for the combustion process. Although rare, internal engine mechanical problems can and do cause No Start Conditions.

What does it mean when Your starter motor fails?

Starter motor failure produces one common symptom across all makes and models: When you turn the key, the starter solenoid will click, but the engine will not rotate. You also Read More

What to do if your Ford Explorer starts Hot?

Then troubleshoot the engine coolant temperature sensor and engine control system. If the starting system only gives you trouble when the engine is hot. check the fuel filter and make sure the fuel injection system is receiving fuel. In rare cases, the fuel system may be experiencing vapor lock.

What are the problems with the 2013 Ford Explorer?

See all problems of the 2013 Ford Explorer . Tl- the contact owns a 2013 Ford Explorer. The contact stated that after multiple attempts to start the vehicle, the engine would not crank, as the check engine light illuminated.

Is the 2016 Ford Explorer hard to start?

See all problems of the 2016 Ford Explorer . My 2017 Ford Explorer XLT with base 3. 5 v6 has been hard to start from the first week of ownership. It has less than 5000 miles on it now and isn’t fixed. Ford dealership stated it would have to get worse before they could fix it.

Why does my Acura TLX engine not start?

When there is no spark, the engine will not start. You’ll probably have a misfire related code such as P0300, P0301, etc….. Ignition issues can be caused by many things, including bad spark plugs, bad coil packs, bad plug wires, computer issues, and more. 3. Engine Timing

Where can I get a Ford Explorer sensor replaced?

The sensor may need adjustment or replacement. Since 2003 Dan Ferrell has contributed general and consumer-oriented news to television and the Web. His work has appeared in Texas, New Mexico and Miami and on various websites. Ferrell is a certified automation and control technician from the Advanced Technology Center in El Paso, Texas.

Why is the ignition not working on my Ford?

The dash says, “Key not detected” and we are stuck wherever we are. We took it to the dealership who then worked with Ford engineers who finally found the problem and solution. The ignition itself is the culprit. The ignition reads the key fob and the sensor in the ignition is faulty.

Can a 2005 Ford Explorer move in reverse?

My 2005 does this. 2 people found this helpful. Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.

What kind of engine does the Ford Explorer have?

©Ford via Wieck Safety features like Roll Stability Control and a new antiskid systemwere made available in the 2002 Explorer. Under the hood, the overhead-cam 4.0-liter V6 was now the Explorer’s base engine; the ohv unit was dropped.

Is the Ford Explorer still all wheel drive?

As before, it was integrated with Ford’s Roll Stability Control airbag activation system. In one other notable change, Explorer’s all-wheel drive was withdrawn, apparently for lack of sales interest. The Sport Trac put in a brief appearance without change. A redesigned replacement would bow as an early-2007 entry.

When did the Ford Explorer 4 doors come out?

All-new from the ground up, the 2002 four-doors lifted the Explorer to a new level of sophistication in appearance, ride, handling, and features. As a result, this Ford remained America’s top-selling SUV. Though it didn’t lead the class by as much as it once did, it was still vital to Ford Motor Company’s fortunes.

What does it mean when Internet Explorer won’t open?

Sometimes, when you click a URL on a website, Internet Explorer doesn’t open the link, especially if the web browser is open. Whatever the reason, there are a few things you can do to fix it.

Is the back up camera on the 2014 explorer working?

2014 ford explorer back up camera doesn’t work some of the time. Get message on screen to “contact dealer”. What could 2014 ford explorer back up camera doesn’t work some of the… 2014 Explorer, back up camera is intermittent. OEM. Have Have tried nothing so far.

Why does my 2002 Ford F150 not start?

Engine cranks but won’t start. 2002 Ford F150 ford 2002 Occasionally engine cranks but won’t start. Getting worse. I had fuel pump relay checked and it was good. Purchased a new one anyway. Checked fuel pressure once it started. It was 32 psi. Lost less than 5% when shut off. Replaced fuel pump.

What causes a car to crank but not start?

One of the biggest issues that causes a vehicle to crank but not start is ignition issues. When there is no spark, the engine will not start. You’ll probably have a misfire related code such as P0300, P0301, etc….. Ignition issues can be caused by many things, including bad spark plugs, bad coil packs, bad plug wires, computer issues, and more.

What’s the problem with my 2002 Ford Explorer?

My 2002 ford explorer won’t start I changed my starterd and my battery and my alternater it still won’t start now my 2002 ford explorer won’t cut off when I turn the key ignition switch off what the problem please help me out 10 people found this helpful. Roll driver window down, get out lock door with key, remove key.

Why does my Ford Explorer crank but not start?

Spark. So, when your Ford 4.0L Explorer (Aerostar, Ranger or Mountaineer) Cranks but Does Not Start, it’s because one of these components is missing from the mix.

What to do if your Ford Explorer is stolen?

Take off the top cover of the steering wheel or theres a little square cover you can pop open with a screw driver. Put the screw driver in the opening and push down on this piece that is spring loaded and pull down on your shifter. Put your car back in Park and start your car! Hope this helps you guys! 10 people found this helpful.

Why does my Ford Escape not turn on?

The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your Escape won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.

Where is the overide light on a Ford Explorer?

Put the key in the ignition, and turn forward all the way just before cranking. Then within 5 seconds, locate, press and hold in the valet/overide button, found under the dash area, (push button, spring loaded) until the installed LED (the blinking light) in your dash area goes on solid, and the siren chirps once.

Why does my car not start, not even click?

In some cars it is the starter that usually fails and that way you dont have to guess elsewhere. As another answer says, it could be just the solenoid that does not wants to engage. So this seemed to be my problem in the first place 🙂 The car will not start, not even click but all lights are ok.

What does it mean when your car won’t turn over?

When your car won’t crank, won’t turn over, won’t start, and talks back with a single click or rapid-fire click, click, click, click, click, it’s likely the result of an issue with the electrical charging system and/or the starter. These symptoms could spell problems with the wire connections, battery, battery terminals, or alternator.

Why does my car make a clicking noise when I turn the key?

Although a clicking sound can come from other sources such as the suspension, the most frequent and familiar clicking comes after turning the key or pressing the ignition button. There might be a sluggish single click or there might be a jarring spray of clicking, and both are symptoms of parts asking for assistance.

What are the problems with a 2008 Ford Explorer?

1 Transmission Lurches 2008 Explorer Average Cost to Fix: $1,300 Average Mileage: 58,000 mi 2 Transmission Clunks When Shifting Gears 2008 Explorer Average Cost to Fix: $2,500 Average Mileage: 69,000 mi 3 Transmission Failure 2008 Explorer

Why is my 2008 Jeep Grand Cherokee not turning over?

Have had to jump start 4 times and carry a portable starter with me. 2008 Grand Cherokee began experiencing intermittent starting problems. Without warning the vehicle would not turn over. All dash lights were working. As well as radio, AC, power windows and all other electrical systems. No codes showed on the computer.

Why does my car make a clicking sound when I start the engine?

Repeated “clicking” sounds usually indicate a dead battery. But a faulty solenoid that fails to make adequate electrical contact inside can also produce this tell-tale sound. 4. Sometimes a bad starter solenoid, instead of preventing the engine from starting, may cause it to start on its own without the key being turned to the “start” position.”

What are the problems with a 2004 Ford Explorer?

See all problems of the 2004 Ford Explorer . The contact owns a 2016 Ford Explorer. While driving approximately 40 mph, the engine shut off. The contact turned off and restarted the vehicle, and the check engine indicator illuminated. The vehicle was taken to a local dealer where it was diagnosed that the throttle body needed to be replaced.

Why is the moonroof on my Ford Explorer not working?

The shade motor works correctly, but the glass motor is not working. … read more 2014 ford explored moon roof wont close. Sport wagon. Vocational, Technical or Tra… Ford 2015 moonroof will not close. Ford Explorer 2015. yes fixing myself.

Can a Ford Explorer go into defrost mode?

Now, I can successfully change between defrost, front vents, floor vents. 7 people found this helpful. FYI, the actuator for the Mode door is a AA5Z-19E616-A or YH-1769. This is different than the blend actuators that are AA5Z-19E616-C or YH-1779. I replaced both of those as well while the dash was apart (as preventative maintenance).

What’s the problem with my 2014 Ford Explorer?

I had bought a used 2014 ford explorer xlt flex fuel 4wd from a used car dealer in ionia, mi. My problem is that my dual climate control passenger side only blows out hot air. No matter what temperature I set, passenger side just blows hot air even if I turn off dual model.

What is the climate control on a 2014 Ford Explorer?

“WE HAVE DUAL CLIMATE CONTROLS FOR FRONT AND THE DRIVERS SIDE WOULD COOL, BUT THE PASSENGER SIDE BLEW ONLY HOT AIR NO MATTER HOW LOW YOU SET IT.” “The climate control for the 2014 Ford Explorer is not great.

What are common reasons my Ford Explorer won’t start?

What are common reasons my Ford Explorer won’t start? While there are a variety of reasons your Ford Explorer won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter. How is a no-start diagnosis fixed?

Where is the electric switch on a Ford Focus?

The lock cylinder is the housing into which a vehicle’s starter key is inserted, and the electric switch is located just behind it. In most Ford models these two parts are combined into one unit with four positions that the starter key turns to through the ignition process: off, accessories, on, and start.

Why is my Explorer 4.0 engine not cranking?

05 explorer 4.0 just did a engine replacement got every thing hooked up but it won’t crank or start but if I cross the starter it’ll turn over. Message center on dash says engine service fail mode what ever that means any ideas?

What’s the difference between no crank and no start?

There’s a big difference between a No Crank and a No Start Condition. Here’s a brief description of both conditions: No Start Condition: The engine cranks (turns over) like it wants to start but it never does. The usual culprits are: Failed crank position sensor.

Why is my car engine not cranking over starter?

Engine is not cranking over – starter not working for me? Turn ignition to crank it will not start or turn over and no click sounds. Friend with me checked fuses seemed okay. Turned key to on crossed starter, engine turned over but would not start. He suggested either ignition switch bad or a neutral switch.

How can I tell if my over starter is working?

Use a test light and verify power at both sides of the fuse. Next check the starter relay in the under hood junction box. With the test light you should have battery voltage at pin 30, When the key is turned to start with the shifter in park or neutral you should now have battery voltage at two pins, 30 and 85.

What should I do if my alternator is not working?

The solution is to check your car’s manual for the particular fuse that controls the alternator and replace it. In some cars, you might also find another small fuse to the alternator’s control—usually a 15A to 20A fuse. An alternator does usually has 3 or 4 wires to it to function properly.

Why is there a noise coming from my alternator?

Noise from the alternator could be caused by a faulty rotor shaft, rectifiers, bearings, slip rings, stator winding or brushes. You will need to carefully inspect each of these components and replace them. One sure way of confirming that the noise is coming specifically from the alternator is to use a vacuum hose.

Is the alternator the only thing that powers the car?

Many people assume that the car’s battery is the only thing that powers all electrical components in the car. But, this is not true. The alternator plays a vital role in supplying power to the car’s AC, recharging the battery and ignition.

Can a bad alternator leave a Ford Explorer without power?

A bad alternator can leave your Ford Explorer without power and unable to move. Alternators don’t always go bad in the exact same way. We’ll cover the symptoms of when an alternator goes bad, and how to diagnose a bad one (which is really pretty easy). The alternator’s job in your Explorer is to provide electricity as it is running.

What happens when the battery dies on a Ford Explorer?

When the battery gets so dead it will no longer be able to power your Explorer’s ignition system. As the ignition system is no longer able to produce a full powered spark, the engine will begin to sputter and stall.

What should I do if my ignition key won’t turn?

Average rating from 41 customers who received a Ignition key does not turn Inspection. It can be frustrating when you insert your key into your car’s ignition and it refuses to turn. Your mind races with all the possibilities of what could be going wrong, but luckily, most ignition key issues are not only common, but also quick to fix.

What causes a car key to not turn over?

This can trap a piece of the key inside the cylinder, causing more damage. Also known as a key cylinder, the ignition lock cylinder is another area that could be causing issues with a key turning over. Below are the two most common problems associated with the ignition lock cylinder and the key not turning.

What happens when you remove the key from the steering wheel?

In many vehicles, removing the key locks the steering wheel from turning. Occasionally, because of this lock, the steering wheel can get stuck, which in turn means the vehicle key also becomes stuck and cannot move to release it.

How to troubleshoot a Ford 4.9L no start?

Part 1 -How to Troubleshoot a No Start (Ford 4.9L, 5.0L, 5.8L). Troubleshooting a no start problem on your Ford 4.9L, 5.0L, or 5.8L pick up, van, or SUV can be easily done, with the right diagnostic information and troubleshooting strategy and in this article I’ll provide you with some of both.

How to diagnose no crank no start Ford?

No crank no start Ford issues are pretty easy to diagnose. Click on the illustration below and download the PDF wiring diagram of a typical Ford starting system.

Why does my Ford Explorer key not turn?

While there are a variety of reasons your Ford Explorer key won’t turn, the most common 3 are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key. Get your Ford issue diagnosed by a professional.

What makes a Ford no crank no start?

You’ll see that the system consists of a fuse, ignition switch, starter relay, transmission range selector (neutral safety switch on for an automatic transmission) or a start inhibit switch for a manual transmission, and a ground control circuit provided by the PCM. The PCM gets involved here because of the ford passive anti-theft system (PATS).

Can a bad ignition switch cause a car to not turn over?

The vehicle will not be able to turn over because the electrical wiring in the electric switch isn’t able to communicate with the battery, and the vehicle’s accessories will function poorly (lights dim or not working). Problems in the vehicle’s lock cylinder will impact the driver’s ability to insert the starter key into the lock housing.

Where is the ignition switch on a Ford?

The Lock Cylinder What is often called the “ignition switch” is actually two components: the lock cylinder, and the electric switch. The lock cylinder is the housing into which a vehicle’s starter key is inserted, and the electric switch is located just behind it.

Where is the Check Engine light on a Ford Explorer?

If you do this and the light does not go away, there is only one cost effective and time-saving way to troubleshoot the “Check Engine” light on your 2000 Ford Explorer. Connect the onboard diagnostic code reader (OBDII) to the OBDII port located under the driver’s side dash panel on your Explorer.

What should I do if my Ford Explorer wont start?

For example, if your Explorer was serviced recently, then the associated components are a good place to start. Make sure that the tank contains enough fuel to start the engine. Read the battery voltage using a voltmeter and make sure that it has enough charge to operate the starter motor.

What to do when your Ford key does not work?

Leave it in “on” until the light stops blinking. Set your foot on the brake and turn the key to start the car. The Intelligent Access (IA) key system from Ford is designed to make it easy to get in your vehicle and go without digging through pockets or purses for your keys.

What to do if your Ford Explorer is stalling?

Before troubleshooting any automotive issue, including stalling issues with the Explorer, make sure that you check the vehicles trouble codes with an OBD2 scanner. Trouble codes are always a great place to start diagnosing problems on today’s modern computer controlled vehicles. Without them, you are in the dark. These codes are vital to diagnosis.

What’s the new Ford Explorer going to be like?

The 2020 Ford Explorer looks to get this decade off to a hot start with its all new interior. It comes with a bigger center screen, improved navigation system, clear front and rear view cameras and a hands free charging port. The most important quality of a SUV is cargo space.

What kind of problem does a Ford Explorer have?

The contact owns a 2011 Ford Explorer. The contact stated that the vehicle failed to start with the illumination of the key not detected warning message. The vehicle was towed to the contact’s home where she received directions from the dealer over the phone in how to restart the vehicle.

Why is the AC not working on my Ford Explorer?

Dealership is “guessing” it was a fan, which had been replaced previously under an “engineering letter” which later turned into a recall, for engine overheating in winter. Still not sure how that’s supposed to affect the AC. Car was fine for two weeks and began not working again during a heatwave – not convenient.

Why does my 2013 Ford Explorer not start?

The 2013 Ford Explorer car makes a clicking noise but won’t start: If you turn the key to the “Start” position, but the engine won’t crank; all you hear is a single click or repeated clicking coming from the engine compartment. Very often this could be caused by a low battery or poor connection between the battery and starter.

If you turn the key to the “Start” position, but the engine won’t crank; all you hear is a single click or repeated clicking coming from the engine compartment. Very often this could be caused by a low battery or poor connection between the battery and starter. Check the battery and the terminal cable connections.

What to do when your car won’t start?

When attempting to start the engine, make sure the transmission is in Park (P) or Neutral (N). Also, check the starting circuit for broken, loose or disconnected wires and cables from the battery to the starter solenoid, the ignition switch and the starter motor.

Why is the air conditioner not working on my Ford Explorer?

Like the radiator, the air conditioning condenser on Ford Explorer sits at the front of the vehicle and is responsible for releasing the heat from the refrigerant into the ambient air. Over time, grime, bugs and other small particles can build up on its surface and in the gaps of its mesh.

How can I tell if my starter motor is working?

Read the battery voltage using a voltmeter and make sure that it has enough charge to operate the starter motor. Your battery should have close to 12.6 volts with the engine off. Examine the connections between the battery and the starter and make sure that they are tight and clean. Loose or dirty connections will prevent proper current flow.

What does it mean when your Ford Explorer won’t start?

The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your Explorer won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.

Many of these are connected to the generic electronic module, which is a computer used on Ford explorers to control electronic functions. Interior lighting, battery save mode, four-wheel drive and headlights are all electrical components that may stop working on Ford explorers. Some common electrical problems arise due to tampering by car owners.

Why are so many electronic components in my Ford Explorer?

Because a vehicle has so many electronic components, it is not uncommon for one or more of them to fail—especially if they are connected in a series. Many of these are connected to the generic electronic module, which is a computer used on Ford explorers to control electronic functions.

What are the symptoms of a bad engine control module?

1. Check Engine Light Turns On 2. Engine Stalling or Misfiring 3. Engine Performance Issues 4. Car Not Starting 5. Poor Fuel Economy The engine control module (ECM), also commonly referred to as the engine control unit (ECU) or powertrain control module (PCM), is one of the most important components found on virtually all modern vehicles.

What does the 4×4 auto button do on a Ford Explorer?

I recently purchased a 2008 Ford Explorer XLT 4WD. When I push the 4×4 HIGH button, a 4×4 light comes on the dashboard. Likewise, when I push the 4×4 LOW button, a 4×4 and LOW light comes on. When I push the 4×4 AUTO button, there is no light and no indication that the 4×4 AUTO system is engaged.

When to turn off 4WD on Ford Explorer?

The vehicle constantly senses whether or not wheels are slipping and engages 4WD as necessary. The 4WD auto system should turn off after the car is shut off and thus you’d need to turn it on any time you wanted to use it. 54 people found this helpful.

Can a Ford Explorer be in 4 wheel drive?

you just answered your own question.4 high light on,4 low light on push again no light on,you in 2 wheel drive.never drive in 4×4 unless in snow,ice, mud or just plain stuck. 21 people found this helpful. Ford Explorers are always in 4 wheel drive, If you push the 4X4 auto it is in it’s standard running mode. In other words 4 wheel drive on demand.

While there are a variety of reasons your Ford Explorer won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter.

How can I tell if my Ford Explorer has no power?

Ask Your Own Ford Question Ford Mechanic: Ron, ASE Certified Technician replied 10 years ago Check and see if you may have left one of you power wires off the positive battery side of the solenoid, all power to the car starts there. Ask Your Own Ford Question Customerreply replied 10 years ago

Why does my Ford Explorer need two new batteries?

I took it to the Ford dealership and they said something is draining my battery and it is not holding a charge. There’s no reason why a 2018 Explorer should need two new batteries in 2 years. Something is draining my battery and no one can tell me what that issue is. Had car serviced on 06/13/20 battery 100% documented.

What was the battery problem on my 1994 Ford Explorer?

Ron : The 1994 had known issues with a bad end on the positive battery with the connection on the smaller red wire coming out of the connection at the positive post on the battery. I would start with eaither reeplacing the cable end or the complete cable. JACUSTOMER-3ao1dpav- :

Where does the power come from in a Ford Explorer?

All your power comes from the battery cable side of this solenoid, the positive battery cable runs to the solenoid, and there should be 3 or 4 other small fuse linked wires also hooked to this side, this is the power wires going into the truck. The other side is the cable down to the starter.

Is the battery fully charged on my Ford Explorer?

Ford explorer – no electrical power – battery fully charged -lights, horn, flashers, nothing – – Answered by a verified Ford Mechanic We use cookies to give you the best possible experience on our website.

Why is there no power in my car?

No electrical power even with a new battery that I bought because of the problem. I checked the new battery and it has a strong spark, but not even the lights work…NOTHING WORKS. Is there a main fuse or something because no matter what I do I can’t get anything to work. I even jumped the 2 large connectors on the solenoid and nothing.

Starter motor failure produces one common symptom across all makes and models: When you turn the key, the starter solenoid will click, but the engine will not rotate. You also Read More

Correcting most no-start problems usually involves replacing the alternator, starter or battery, cleaning connections, ignition system repairs, or fuel system repairs. But because there are so many potential causes, the diagnosis is key to understanding how expensive the repair will be. When a vehicle doesn’t start it can be for many reasons.

How often does the Ford Explorer Sport Trac start?

Also please check out the statistics and reliability analysis of Ford Explorer Sport Trac based on all problems reported for the Explorer Sport Trac. Car takes about 3 to 5 tries to start.

Why is the O / D light flashing on my Ford Explorer?

O/d light flashing on my 2002 Ford Explorer Sport Trac. The last few months the vehicle has been sluggish in power and shifting at the wrong times. We brought it into the Ford dealership.

What happens if you have low oil pressure in your Ford Explorer?

One of the most serious issues that can happen to your Ford Explorer ‘s engine is if ends up with low oil pressure. Low oil pressure will cause the engine to seize up. When the oil pressure light on, it should be assumed that the engine locking up is imminent.

What to do when your Ford Focus won’t start?

They say that’s what they do with all the cars on their lot. Meanwhile, under the Ford warranty program when the car’s anti-theft system locks it up, Ford needs to send a tow truck to drag the Focus back to the dealer to get it restarted. What a waste if everyone’s time and money over a nonsenical engineering problem.

Why does my Ford Explorer alarm not go off?

Vocational, Technical or Tra… The anti theft light flashes very quickly when I turn the key to start my 2004 ford explorer. Car will not start, lights work, etc. … read more I have a 98 Explorer (2dr) and the alarm won’t turn off. I have flashing lights and a siren that goes off. Any answers? … read more Vocational, Technical or Tra…

What’s the problem with my 2004 Ford Explorer?

I have a 2004 Ford Explorer with a starting problem. twice when I went out to go home in the evening, it would not start. It would turn over and over … read more 2004 Ford Expedition horn keeps sounding (alarm) when I enter the car. We lost the “fob”. The key in the ignition, on and off, won’t shut off … read more Vocational, Technical or Tra…

What does Autostop eliminator do on explorer St?

I just wanted to add, for those concerned that the Autostop Eliminator makes the auto stop-start off permanently, it does not. This was the first mod to my ST, and all it does is makes the switch remember the last setting you had it in, so no more need to hit the button every time you start the car.

Is there a way to turn off auto stop start?

This was the first mod to my ST, and all it does is makes the switch remember the last setting you had it in, so no more need to hit the button every time you start the car. You can hit to button again anytime to re-enable auto stop-start.

What should I do if my car wont start?

When the security light goes off, turn the ignition off, wait 20 seconds, and then start the engine. These are the most popular ways to solve the problem of anti theft system car wont start.

What are the drawbacks of a 2005 Ford Explorer?

Its main drawbacks were an unrefined V6 engine and unimpressive performance on our off-road course. Stability control was standard in 2005. In most cases, automotive warranties are based on the vehicle identification number (VIN), and the warranty will be valid regardless of ownership. The dealership can tell you exactly how much warranty is left.

Are there any recalls on the Ford Explorer?

Stability control was standard in 2005. There are 3 recalls on this vehicle. Learn More. Acceleration Acceleration tests are conducted on a smooth, flat pavement straightaway at the track. Time, speed, and distance measurements are taken with a precise GPS-based device that’s hooked to a data-logging computer. 0 to 60 mph (sec.)

When did the Ford Explorer ESC come out?

ESC available from 2003, standard from 2005. While the current Explorer is a vast improvement over its predecessor, it competed in a market with many more choices. Still, its steady ride and versatile, well-designed interior made for a well-rounded package.

What kind of warranty does Ford Explorer have?

In most cases, automotive warranties are based on the vehicle identification number (VIN), and the warranty will be valid regardless of ownership. The dealership can tell you exactly how much warranty is left. The Reliability score is based on our latest subscriber survey of 2005 Ford Explorer owners.

Why is my Ford Explorer battery draining while driving?

If it is draining while your Explorer is off, it’s usually caused by something that is drawing current that shouldn’t be. If the battery is draining while you’re driving, that is probably going to be the alternator or battery. There are other situations as well. We’ll cover those for you below.

Where can I buy an alternator for my Ford Explorer?

Most parts stores can test an alternator for you. They usually don’t charge anything for this service, they just want to sell you an alternator if you need it. If your Explorer’s battery is draining after being parked for a few days, here are two possible scenarios.

What to do if you don’t see a battery light?

If you didn’t see a battery light, and now the vehicle is dead when you go to start it, the first thing that you need to look at is the battery. You can take it up to the local parts store and have it tested. They’ll need to charge it for a while, so plan on dropping it off and returning a few hours later.

Can a Ford Explorer have a no start condition?

Testing a Cranks but Does Not Start condition on your 4.0L Ford Explorer (Aerostar, Ranger, Mountaineer) doesn’t have to be hard. In this tutorial, I’ll go into the basics of a no start condition and show you some of the step-by-step tutorials that’ll help you get to the bottom of the problem.

What is the current draw on a Ford Explorer battery?

I disconnected the ground from the battery and hooked up an ammeter between the ground cable and ground post and read a current draw of about 0.6A. After pulling fuses I narrowed down the draw to two circuits. Fuse #15 in the power distribution box is worth about 0.5A, and fuse #3 in the passenger compartment fuse panel is worth about 0.1A.

Why does my Ford Explorer battery keep draining?

Side note the only way to open the door now is a quick snap motion or if getting out give it a good smack. The window works great but the radio still requires manual shut off. Eventually after 10 or 15 minutes with no key in the radio will turn itself off. Last week I just started needing a jump every damned day when I left work.

What is fuse # 3 on Ford Explorer?

Fuse #3 is labeled as Radio / DVD / Amplifier. I do have an aftermarket radio, so I disconnected it and the 0.1A draw is still present. The car came equipped with the factory subwoofer, but I have not removed the panel to check and see it that is causing the draw since I want to find the large draw first.

Why does my 2004 Ford Explorer not start?

We replaced the battery on a 2004 Ford Explorer. The dash lights and headlamps all work fine but the truck will not start. There is not even any … read more Associate of Occupational i…

What makes a Ford 4.9L engine not start?

Without spark, the engine will crank but not start. Ignition control module (ICM). Depending on the year of your specific Ford, it’ll have a inner-fender mounted ignition control module or a distributor mounted ignition control module.

What does it mean when your car won’t start?

In a no start condition (also known as a cranks but does not start) your vehicle’s starter motor is cranking the engine but the engine is not starting. This is usually due to a lack of spark, or fuel, or engine compression and in this article I’m gonna’ explain in some detail how to diagnose this type of condition/problem.

Why does my Ford Explorer engine not start?

There are a lot of issues that can cause your Explorer to crank, but not start. The engine needs air, fuel, and a spark in order to run. It is highly likely that if the engine is cranking, but not starting that it has thrown an OBDII code. It is definitely worth it to use an OBDII scanner to check and see if the engine has thrown any trouble codes.

Why does my car not work after a jump?

Your alternator is bad: If your car still won’t work, even after a jump, the alternator could be the culprit. The alternator is responsible for sending energy back to the battery, replacing what the battery loses from starting the car and performing other functions. The warning signs of a bad alternator are similar to those of a dying battery.

Can a bad jumper cable cause a car to not start?

If this switch is bad or gets damaged, this information cannot be sent to the engine computer, and your car won’t start after a jumpstart. Your jumper cables are bad: All jumper cables are not created equal.

When the dimmer switch is on, so that you have dash lights the door ajar light stays on, so does the interior lights and the auto door locks do not work. If you turn it completely off, then door ajar … read more

Where is the transponder on a Ford Explorer?

The transponder is located on the steering column around the lock cylinder. The trim around the steering wheel will need to be reomved. The Vehicle Security module is located behind the left rear seat behind the trim panel on the right side.

What does the theft light flashing on a Ford Explorer do?

The THEFT light flashing is a passive system that shuts off the fuel pump (cranks but won’t start or starts and dies). Does your key have a chip in it? You might try another (chipped) key if it does. You may need to hook up scan tool to see what is going on with the theft deterrent system.

What causes a Ford Explorer to stop running?

And this other source talked about this because it can also cause the engine to shut off..

Why does my Ford Explorer stall at red lights?

18 people found this helpful. just tried the fuel relay. instead of spending approximately $20 in a new one, I switched the A/c relay with the Fuel relay to test it. so far, my truck is not stalling when I stop at a red light. since my truck is only shutting off on me once a week, I am going to keep it like this for about three weeks.

When does Ford Explorer hesitate during acceleration inspection?

Ford Explorer Engine hesitates during acceleration Inspection at your home or office. Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM. Our certified mobile mechanics can come to you now. Ford Explorer Engine hesitates during acceleration Inspection costs $89 on average.

When does the Ford Explorer engine shut off?

The vehicle will just shut off at anytime. It’s not the auto start feature, all power will turn off at anytime. It has happened numerous times while driving waiting at a red light or to make a turn. It always happens while driving in the city. See all problems of the 2020 Ford Explorer .

Why does my car not start when I try to start it?

But if the battery doesn’t have enough juice to start the engine or repeatedly needs a jump start, the problem may originate elsewhere, and jumper cables or even a new battery won’t solve the problem. Here are eight possible reasons your car won’t start.

Why does my Ford Explorer car not start?

It is a $40000 lemon that takes 3-4 times attempting to start before the engine will run. This weekend it took at least 30-40 seconds before vehicle started, then it would not idle correctly! still no dtc’s! vehicle does this no matter the length of time engine has run or level of fuel? it does it during remote start or the push button.

What was the last time my Ford Explorer had a problem?

This last time on August 24, 2015 I contacted Ford roadside assistance to tow it to the closest Ford dealership to find out what was wrong. Turns out the shifter was defective and as a result it drained the battery. It cost me $672. 39 to replace the shifter and the battery; which is a lot of money when your out of work/retired with health issues.

What to do if your car key is stuck?

Use a cotton swab and rubbing alcohol to remove any foreign material that may be stuck to the key. You can then attempt to start the car again.

Is the Ford Explorer still working after the battery died?

Now less than a year later, it’s August 2020 and the key pad on the driver’s side exterior door is malfunctioning and blinking uncontrollably until it finally died and does not work. The car is still functioning fine up until this point.

What to do with Ford Explorer with dead key?

Ford Explorer with a dead key: Get in and start push button start models. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

When was the last time my Ford Explorer failed to read the chip?

The last time my 2001 Explorer failed to read the chip I just bumped the steering wheel a couple times to send vibrations through the column. It worked. Probably same effect as mentioned above by Sandra. The Ford mechanic said the “reader” will eventually fail all together and will need replaced. 51 people found this helpful.

How can I get power to my Ford Explorer?

I checked the wires going to the solenoid, all wires are connected. If I jump the two posts on the solenoid I get power to everything – the lights go on, and if the key is in the the on position, the gauges go active, how ever I can not turn lights on unless I jump the two solenoid posts with a remote starter tool.

What kind of battery does a Ford Explorer have?

Ford exploere xlt ford explorer – no electrical power – battery… Customer Question ford explorer – no electrical… ford explorer – no electrical power – battery fully charged -lights, horn, flashers , nothing – Submitted:10 years ago.

Why is the anti theft light blinking ON MY 2001 Ford Explorer?

Says there is no re-programming involved because it simply reads the chip and sends the info to the system. The last time my 2001 Explorer failed to read the chip I just bumped the steering wheel a couple times to send vibrations through the column. It worked.

Is the Check Engine light blinking when turning on?

Light blinks like crazy will turn over no start . also code 11 blinks once and then a again a sec later . ive tryed everything read the codes no codes but the check engine light is on? It doesnt stay on for 1 sec let alone 3 when turning on?

Why is my car’s anti theft light blinking?

***** Solution #2 I followed this post and it worked first try: http://www.cargurus.com/Cars/Discussion-c112_ds558688 My problem started when the battery had gone dead in my 97 Expedition. After jumping it a couple different times, the Theft light came on. Just like everyone else I couldn’t get out of the blinking Theft light condition.

Why does my 2.7L engine not start when hot?

I honestly have this exact same problem with my 2.7L. I can guarantee that something is becoming heat soaked when the engine sits for 5-25mins after being at operating temp.

Why does my focus starter not turn over?

Guessing because the problem with the old starter was intermitant, that bench testing could detect a problem. Keep in mind that this problem with the starter not even turning over or just clicking was very intermittent. Seemed to happen especially in cold weather.

Why does my 1999 Cougar engine not restart?

Our 1999 Cougar runs fine but, randomly, after stopping and shutting down won’t restart. After 30 minutes it starts right up. It doesn’t appear to be the fuel pump.

What causes a Ford Explorer to shake when idling?

Your Ford Explorer’s fuel injection system atomizes the fuel into a fine mist. If a fuel injector is not operating properly, it will either let too much or too little fuel into the combustion chamber relative to the amount of air. There are many reasons why a fuel injector may go bad, as well as different symptoms relative to how they went bad.

Why are the interior lights not turned off in my Ford Explorer?

It use to be the little button down by your foot on older model vehicles which would be depressed when the door is closed. The switch is down (inside the door) by the lock mechanism. Sometimes it sticks and results in the interior lights not being turned off when you close the door.

What should I do if my Ford Explorer does not shut off?

There should be a plastic spacer (usually gray) around the post. If it is missing that is the cause of your problem. Check the other door strikers and compare them. On earlier model explorers the plastic insert can only be purchased for the tailgate, the entire striker needs to be replaced on the doors.

Why are the interior lights not turned off when you close the door?

The switch is down (inside the door) by the lock mechanism. Sometimes it sticks and results in the interior lights not being turned off when you close the door. It’s probably the drivers side door. Sometimes, and it worked with my daughter’s vehicle, it can be fixed with a good dose of WF40 flooded onto the switch mechanism.

Can you test a Ford 4.6L in no start?

Testing a cranks but does not start condition on your Ford 4.6L, 5.4L car, pick up, van or SUV can leave you scratching your head and wondering where to start and/or what to test. Well, I can tell you that testing a no start doesn’t have to turn into a nightmare and that you can save money by testing certain components before replacing them.

Why does my Ford pick up not start?

Alright, let’s get started with the next subheading. The most important thing that you need to keep in mind, when you’re faced with your Ford vehicle cranking but not starting is that the engine needs air, fuel and spark to start. If any one of these is missing from the mix, your 4.6l, 5.4L Ford pick up (car, van, or SUV) will not start.

What kind of car is 2003 Ford Explorer?

Greetings: I own a 2003 Ford Explorer Limited V6 4 Flex Fuel with around 142K miles. About 6 months ago, I notice my truck would have a hard start. (Hard as, it wont turn over. All the lights come on, the beeping, rev, rev, but wont catch). Once it does start, it can stall out, or tries to stall out (the stalling out is not consistent).

What kind of ignition system does Ford 4.0L have?

The ignition system of the Ford 4.0L equipped vehicles covered by this article use a distributor-less ignition system. More specifically, it uses a coil pack type ignition system. No power to the ignition coil pack.

Why does my Ford 4.0L explorer not start?

So, when your Ford 4.0L Explorer (Aerostar, Ranger or Mountaineer) Cranks but Does Not Start, it’s because one of these components is missing from the mix.

If you turn the key and can hear the starter motor trying to turn the engine over, the lack of power is likely caused by electrical issues such as a weak battery, dirty battery terminals or a worn starter motor. Let’s look at some ways to try to fix them.

Why does my 2020 Ford Explorer not start?

See all problems of the 2020 Ford Explorer . This has happened over and over . . The car will not start. Sometimes it will just stop and will not start again. Sometimes it will happen in a parking lot. Sometimes it happens in the garage. I have had it towed to the dealership at least 4 times. They cannot find anything wrong with it.

No crank no start Ford issues are pretty easy to diagnose. Click on the illustration below and download the PDF wiring diagram of a typical Ford starting system.

Why does my car not turn over when I Turn on the ignition?

If you press this button or if you turn the key on a manual ignition switch and the vehicle does not turn over, it may be caused by a problem with the starter relay. This problem may be attributed to a circuit that has failed, so no matter how many times you turn the key, the vehicle will not start.