How do you reset the oil light on a 2012 Ford Fusion?
How do you reset the oil light on a 2012 Ford Fusion?
To reset the oil light on Your 2012 Ford Fusion, turn the ignition key to the ON position. Don’t start the engine! Press the SETUP button repeatedly until You see OIL LIFE =% HOLD RESET = NEW . Press and hold the RESET button until OIL LIFE SET TO 100% is displayed.
How do you reset the oil light on a Ford Fusion?
Press the “Setup” button on the steering wheel to access “Vehicle Settings“. Repeatedly press the “Setup” button on the steering wheel to toggle the selection until “Oil Life” is displayed. Press the “Reset” button on the steering wheel to select “Oil Life“.
How do you reset the oil light on a 2013 Ford Fusion?
2013-2015
- Turn the ignition to the ON position without starting the engine.
- Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position.
- After 3 seconds, the message center displays “Service: Oil Reset In Prog”
How do you turn off the change oil light on a Ford Fusion?
Head over to the Vehicle menu. When You’re there, look for Oil Life Reset and select it. Now, You’re going to press down on the OK button until the percentage reacheS-100. What You can now do is turn the ignition off and it should be reset.
How do you reset the maintenance light on a 2014 Ford Fusion?
Oil Change Light Reset Ford Fusion 2014 2015 Procedure
- Turn the ignition to the “RUN” position.
- Use the up and down arrows to scroll through the menu and select “SETTINGS”.
- Select “OIL LIFE RESET”.
- Hold “OK” to reset.
How to reset oil life on Ford Fusion?
2010-2012 Ford Fusion Oil Life Reset: To turn off the Oil Service Light on 2010-2012 Ford Fusion, conform to the following instructions: Hit the SETUP button twice. it should say “Oil life remaining XX%” on the info “screen” below your tachometer. If you’re on that screen, hold the RESET button.
How do I Reset my Ford Fusion 2013?
Below is the procedure for the Ford Fusion 2013 . Follow the steps below to reset the oil life monitor after each oil change. Turn the ignition to the “RUN” position. Press both the brake and accelerator pedals at the same time. After 3 seconds, the “SERVICE: OIL RESET IN PROG.” message will be displayed.
How do you reset the oil light on a Ford truck?
Turn the ignition to the “on” position, but do not start the engine. For 2004-2010 Ford trucks: Press and hold the Select/Release knob on your dashboard until the display reads “OIL LIFE XXX% HOLD RESET = NEW”. Use the directional pad on the steering wheel to access the settings menu.
How do I reset the oil life on my Ford Escape?
Press and release the SETUP button to display “Oil Life XXX% Hold Reset = New”. Press and hold the RESET button for 2 seconds and release to reset oil life to 100%.
How to reset oil life indicator light on Ford Fusion?
Time needed: 7 minutes. To reset the Oil Change Required Light on the Ford Fusion, conform to the following instructions: Hit the SETUP button twice. it should say “Oil life remaining XX%” on the info “screen” below your tachometer. If you’re on that screen, hold the RESET button.
How do you change the oil in a Ford Fusion?
For push button ignitions, just press the button once without holding the brake. Do not start the engine. For turn key ignitions, press both the gas and brake simultaneously for about 20 seconds. For push button models, press and hold the button and the gas pedal simultaneously for about 20 seconds.
Is there a way to reset the oil change light?
To reset it completely, toggle the selection to “ Set to 100% “. Once you have selected the desired oil life percentage, press the “ Reset ” button to pick that item. Turn the key to indicator.
How do you reset the oil life on a Ford truck?
For 2004-2010 Ford trucks: Press and hold the reset button for approximately two seconds and release to reset the oil life to 100%. For 2011+ Ford trucks: The menu path to reset your oil life is as follows: Settings>Vehicle>Oil Life Reset. From there, you can set the oil life to whatever percentage you choose.
