What are the diagnostic codes for a 2004 Ford Explorer?

Computer problem. 2004 Ford Explorer V8 Two Wheel Drive Automatic. What do the following diagnostic trouble codes mean? E013, A659, 9352, and 0318. Two days ago, when I started up my car, the message display went into test mode. It gave me the above trouble codes and some other numbers, 4L2T-10849-CF and Serial # 0085885A.

What is the code for Ford diagnostic trouble?

Refer to our Generic OBD II code list for definitions on all other Ford diagnostic trouble codes. P1000 OBD System Readiness Test Not Complete P1001 KOER Test Cannot Be Completed P1039 Vehicle Speed Signal Missing or Improper P1051 Brake Switch Signal Missing or Improper P1100 Mass Air Flow Sensor Intermittent

What is the OBD2 code for a Ford?

OBDII Ford Code Definitions. Be sure to double check the codes. Anything P1000 to P1999 or P3000 to P3400 will be Manufacturer specific and may not match the ones listed here. Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles.

What does Ford diagnostic code ho2s-22 mean?

HO2S Sensor Circuit Malfunction (HO2S-22) See DTC P0135 System to Lean (Bank 1) The Adaptive Fuel Strategy continuously monitors fuel delivery hardware. The test fails when the adaptive fuel tables reach a rich calibrated limit. For lean and rich DTCs: Fuel system Excessive fuel pressure.

What does the code p0457 mean on a Ford Explorer?

P0457 is a somewhat common trouble code with the Ford Explorer. This code references a number that is given to you when you plug your Explorer into a OBDII scanner. P0457 Indicates that there is a leak in the Evaporative Emission Control (EVAP) System. It is similar to P0455 (large leak) and P0456 (small leak)

How does the EVAP system work on a Ford Explorer?

The EVAP system captures all fuel vapor from the fuel tank and sends them to the engines intake in order to be ignited in the normal combustion process. When there is a leak in the Ford Explorer’s EVAP system, it will throw the P0457 OBDII Code.

What’s the trouble code for a Ford engine?

Trouble Code. Fault Location. Probable Cause. P0171. Fuel trim (FT) system too lean, bank 1. Intake/exhaust leak, AIR system, MAFNAF sensor, fuel pressure/pump, injector (s), HO2S. P0300. Random Cylinder Misfire (Cylinder Not Specified) Spark plug (s), HT lead (s), injector (s), ignition coil (s), low compression, wiring.

Where do I find the Diagnostic Code on my BMW?

1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3. Follow scan tool manufacturer’s operating instructions to access the Diagnostic Trouble Codes (DTC’s). Remember, these are manufacturer specific codes only.

When did the Ford Explorer 5.0L come out?

For 1997, revised cylinder heads increased output of the 5.0L V8 to 215 hp. The 5.0L became available in the AWD Ford Explorer in 1997.

What kind of transfer case does Ford Explorer 5.0L have?

The 1997-2001 Ford Explorer 5.0L came as either a 2WD, or AWD. The AWD came with a BW4404 transfer case. This is not the traditional transfer case that allows you to select 2WD / 4HI / 4LO. The BW4404 is a chain driven part-time transfer case that offers torque on demand through a viscous coupling.

What kind of engine does a 1997 Ford Explorer have?

1997-2001 Ford Explorer 5.0L GT40P lower intake on the left, and a 1995-1997 Ford Explorer 5.0L GT40 lower intake on the right: 1997-2001 Ford Ranger 5.0L GT40P lower intake top view: The 1997-2001 Ford Explorer 5.0L came as either a 2WD, or AWD. The AWD came with a BW4404 transfer case.

How is the value of a 2005 Ford Explorer determined?

The value of a 2005 Ford Explorer, or any vehicle, is determined by its age, mileage, condition, trim level and installed options.

Are there any problems with the 2002 Ford Explorer?

Adding insult to injury, the 2002-2005 Explorer also has a massive problem with the rear panel cracking. While it’s a minor annoyance compared to transmission failure, ironically the crack usually goes right through the Ford logo.

Is there a way to donate a 2005 Ford Explorer?

Donate your old car in minutes through the CarTalk Vehicle Donation Program. CarComplaints.com Notes: The 2002-2005 Explorer has a very well-established record of expensive transmission failure at under 100k miles. The Explorer has an enclosed transmission which is typically replaced with a rebuilt transmission at a cost of almost $3,000.

Why does my Ford Explorer battery keep going bad?

Even if your battery does not act like it is starting to go bad, with all the electronics in the newer cars just slight drop in the output from the battery can cause this. That is why cold weather aggravates this problem.

What is the OBDII code for a Ford?

OBDII Ford Code Definitions. P1000 On Board Diagnostic System Readiness Tes – P1001 Key On/Engine Running Not Able To Comple – P1039 Vehicle Speed Signal Missing or Improper P1051 Brake Switch Signal Missing or Improper

What does the p0174 code mean on a Ford Explorer?

Vacuum Leaks – With the Ford Explorer, the most common cause for the P0174 code to show is a vacuum leak. Take a look around and see if you can find the vacuum leak.

What kind of diagnostic software does Ford use?

Ford FCOM is a diagnostic software for Ford vehicle,it It works as well with Ford subsidiaries vehicles such as Mazda, Lincoln, Mercury, Jaguar, but without guarantee of 100% functionality.It can connect to various electronic control units (ECUs) and display identification, read and clear fault code memory, display and record measured values …

How to fix flashing 4×4 light on Ford Explorer?

Ford Explorer and other’s fords 4×4 – YouTube If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: kAgqj2LDEFf1gA9H) Videos you watch may be added to the TV’s watch history and influence TV recommendations.

Where is the throttle position sensor on a Ford Explorer?

Your Ford Explorer uses a series of complex sensors to report what is going on to the ECU. The ECU then uses this information to adjust the timing, air fuel mixture, and more. When one of them goes wrong, it can lead to stalling for sure. Throttle Position Sensor – The throttle position sensor is typically located on the gas pedal.

What to do if your Ford Explorer is stalling?

Before troubleshooting any automotive issue, including stalling issues with the Explorer, make sure that you check the vehicles trouble codes with an OBD2 scanner. Trouble codes are always a great place to start diagnosing problems on today’s modern computer controlled vehicles. Without them, you are in the dark. These codes are vital to diagnosis.

Is the 2004 Ford Explorer a good car?

The years 2002-2005 had the best looking Explorers of all the years made! I bought my 04 Ford Explorer s. U. V. 4 door used from a 1 owner person 175,000 miles on it sure runs great and drives good too I like it a little more than my 2016 Ford fiesta car to this day it still looks great for its age I have done routine maintenance when scheduled.

Are there any problems with the Ford Explorer?

Problems: one window do not work, the battery often quits because of wiring. It is a very reliable car very comfortable and has lots of space. It has 4×4 driving that can be turned on by the push of a button. Lots of space in the trunk for groceries and other big items.

How long has the Ford Explorer been reliable?

2004 Ford Explorer With the exception of minor maintenance and care, this vehicle has been reliable for 14 years. It is comfortable, plenty of space for on the go with children and cross country vacations. Steve hansen wrote on

Are there any problems with the 2004 Ford Explorer?

2004 Ford Explorer Nice vehicle and had 3rd row seats but had lots of transmission problems. The overdrive is out, so it does not want to switch gears. Still drives for the time being. Was a very dependable vehicle for the first year with high mileage I it. Easy for children to get in and out. Very roomy.

Which is the best Ford Explorer to buy?

My black Ford explorer is the best. I have a 2004 black 2004 Ford Explorer. I gave owned it now for 4yrs. It’s not the greatest it gets me from point A to point B. Currently it is in the shop due to a wreck I was in a few weeks ago. Hopefully i’ll get it back soon. My son and I won’t have to walk everywhere.

Where can I donate a 2006 Ford Explorer?

Donate your old car in minutes through the CarTalk Vehicle Donation Program. CarComplaints.com Notes: The previous generation of Explorer was so awful that the redesign in 2006 was greeted with much optimism. That didn’t last long. Read more » The transmission continues to be the Explorer’s worst reliability problem.

Which is the worst model of Ford Explorer?

However, the 2006 Explorer is the worst-rated model due to the high repair cost and extra problems at lower mileage. The Ford Explorer has numerous problems in different categories that are a part of your vehicle.

How can I tell if my Ford Explorer transmission is failing?

The transmission failure in your Ford can be noticed by the car jumping gears without warning, slipping in and out of gears while you’re driving, or preventing you from going into any gear. These are all signs that your transmission has failed, or is currently failing.

How much does it cost to diagnose Ford p0352 code?

The cost to diagnose the P0352 FORD code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

Where is my OBD2 port in Ford?

The norm states that the port must be located inside the vehicle passenger compartment. Depending on the make and model, it may or may not be easy to locate. To diagnose your vehicle yourself, download our EOBD-Facile car diagnostic software. Use our search engine below to locate your OBD2 port! B-Max (2012 – …) C-Max II (2010 – ….)

Why does my computer keep resetting on my Ford Explorer?

For example, when you add new equipment or replace engine components, you will need to reset the computer so it recognizes the new parts. Another reason is a check engine light staying on while you are driving. This is a sign that something is wrong with the engine in your Ford Explorer.

Why is the Check Engine light still on in my Ford Explorer?

Another reason is a check engine light staying on while you are driving. This is a sign that something is wrong with the engine in your Ford Explorer. Resetting the onboard computer will usually turn the light off temporarily. Open the hood: release the primary latch by pulling the release lever under the steering wheel near the floor board.

What to do if your Ford Explorer is still running?

Remove the towel from the negative battery cable clamp. Replace the negative battery clamp. Tighten the clamp screw. Close to hood after removing the security bar. Start the engine. The check engine light should be off. If it is still on, there is a major problem. You will need to have a diagnostic test run as soon as possible.

How to find out if your car has a c1440 code?

Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost to diagnose the C1440 code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.

What does c1440 mean in hydraulic control unit?

C1440 Meaning The pressure transducer is integral to the Hydraulic Control Unit (HCU). The pressure transducer sends a signal to the ABS module that varies in relation to the amount of pressure applied to the brake pedal. The more pressure that is applied, the greater the signal sent to the Anti-Lock Brake System (ABS) module.

What is the code for a Ford navigator?

Code says #1 cylinder misfire…. 2007 Navigator Cam Sensor code 0340 Background – Vehicle runs just fine, no problem starting, mileage is good, engine runs smooth as silk, tons of power 1. Key in ignition, not started, used reader to delete present and pending codes 0340 0344, star…

Can you read your OBD-II code on a car?

If you’re resourceful enough to use your car’s OBD system, then you’re way ahead of the game, but let’s start with a refresher on the OBD-II code ‘s diagnostics, error messages, scan ports, and more. What Is OBD? Since the mid-1990s vehicles have had a built-in troubleshooting system known as OBD.

What should I do about my Ford Explorer engine control computer?

Getting the most out of your SUV means making sure your engine control computer isn’t malfunctioning and keeping your Explorer from starting right away. Replace your current one with a new Ford Explorer engine control module from AutoZone today. Non-mechanical issues are difficult to diagnose and often more frightening than visible problems.

Is it illegal to reset a Ford Explorer?

In some areas, it is illegal to reset the computer without fixing the problem, especially if the problem is with the emissions system of your Explorer. If you live in one of these areas, such as California, fix the problems before resetting the computer. Leigh Kelley is a freelance writer who provides SEO Web copy to industry leading companies.

How do you remove a computer from a Ford Explorer?

Pull Tip: Remove the cruise control module (two 10mm bolts) and place to the side before beginning computer removal. New To Pull-A-Part? Learn The Process

What are the diagnostic codes for a 2004 Ford Explorer?