What does Engine code P0446?
What does Engine code P0446?
P0446: Evaporative Emission Control System Vent Control Circuit. Trouble code P0446 typically turns up in On-Board Diagnostic testing on account of an illuminated Check Engine Malfunction Indicator Lamp. This generic OBD-II code indicates that the evaporative vent valve in the emission control system is malfunctioning.
What to do if your car has code p0446?
Gas caps are relatively inexpensive and are often the fix for code P0446. If the fuel cap didn’t fix it, perform an EVAP system leak check: Pinch off the vent tube to the EVAP Vent Control Valve. Pressurize the EVAP system with an EVAP smoke machine leak checker.
What is the trouble code on my Ford Explorer?
One of the most common trouble codes with the Ford Explorer is the P0446 code. This trouble code references a number that is given to you when you plug your Explorer into a OBDII scanner. P0446 Indicates that there is a fault in the evaporative emission control system. It often appears with other codes, such as P0420, P0441, or P0440.
What should I do about my Buick LeSabre p0446?
After ascertaining what trouble codes appear with the P0446, the mechanic will typically inspect the EVAP system. This includes the purge valve, line, and canister. The mechanic will inspect the gas cap to make sure that it can handle pressure.
What does p0446 do to the EVAP system?
During the leak test, the ECM closes the vent control valve to create a sealed EVAP system. When P0446 is triggered, the ECM has detected a short in the circuitry to activate the vent control valve, or the EVAP system failed to maintain the proper pressure during the active EVAP leak test. What Are The Symptoms Of P0446?
Where is the p0446 code located on a Ford engine?
– The P0446 codes triggered when an improper voltage signal is sent to ECM through EVAP canister vent control valve. The Evaporative System ( EVAP) canister vent control valve is located on the EVAP canister and is used to seal the canister vent. This solenoid valve responds to signals from the Engine Control Module ( ECM ).
How does the EVAP vent work on a Ford p0446?
Evap vent valve is usually supplied Batt. voltage with key on. The ECM’s driver controls the ground, and when grounded, activates the valve (closing it). If the ECM detects a short to ground, and open,or a short to battery voltage on the control circuit, P0446 will set.
After ascertaining what trouble codes appear with the P0446, the mechanic will typically inspect the EVAP system. This includes the purge valve, line, and canister. The mechanic will inspect the gas cap to make sure that it can handle pressure.
One of the most common trouble codes with the Ford Explorer is the P0446 code. This trouble code references a number that is given to you when you plug your Explorer into a OBDII scanner. P0446 Indicates that there is a fault in the evaporative emission control system. It often appears with other codes, such as P0420, P0441, or P0440.
