How long does it take for security light to turn off?

Insert ignition key and turn to the “ON” position. Do not attempt to start the engine. Leave the key in the “ON” position for approximately 11 minutes. The security light will be steady on or flashing for the 11-minute period. Do not proceed to Step 2 until the security light turns off or stops

How to turn on security light without starting engine?

Turn key to the “ON” position without starting the engine. Security light should turn on and stay on. Turn key to the “ON” position without starting the engine. Security light should turn on and stay on. Turn key to the “ON” position without starting the engine. Security light should turn on and stay on. Turn key to the “OFF” position.

What should I do if my security light is not working?

Try covering part of the sensor with black electrical tape or reposition the security lights to a position where the other lights won’t interfere.

Why does the security light flash when the ignition is off?

On some vehicles, it will flash when the ignition is off, and the OEM security is activated. Its other main purpose is to indicate that the security of your vehicle may have been compromised, and the engine has been immobilized to prevent potential theft. Don’t assume right away that it means someone tried to break into or steal your vehicle.

What to do when your security light wont turn on?

1.) Attempt to start the car by turning the key to the Start/Run Position. 2.) Observer that the vehicle fails to start and that the security light is illuminated. 3.) Release key to the ‘ON/Accessory’ Position. (DO NOT turn key to the ‘OFF’ position). 4.) Allow the vehicle to sit with the key in the ‘ON/Accessory’ Position for at least 11 minutes.

How to start a car with a flashing security light?

Attempt to start the car by turning the key to the Start/Run Position. 2.) Observer that the vehicle fails to start and that the security light is illuminated. 3.) Release key to the ‘ON/Accessory’ Position. (DO NOT turn key to the ‘OFF’ position).

Why is the security light on on my Firebird?

GO to start and hear fuel pump go then turn key more and hear click. Security light turns on with nothing else happen. Tried unplugging battery and reconnecting with no luck. Later I will try to start and car fires right up.

Is it normal for the security light to go off when the engine is running?

After the learn procedure is completed and the engine is running, the security light may stay on steady for a few minutes and then go off—this is normal. Depending on the system, replacement of key components will necessitate that a relearn procedure be completed.

What should I do if my PassLock security light goes off?

If nothing happens or the engine starts and dies, the security light will be flashing. Wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine. If it starts and runs, everything is okay.

When does the Toyota Corolla security light go off?

How do I Turn Off the PassLock security light?

1. Turn the key to ON and attempt to start the engine and release the key to the ON position. 2. The SECURITY light will illuminate. Wait 10 minutes until it turns off. 3. Turn the key to OFF for 10 seconds. 4. Turn the key to ON and attempt to start the engine. If it starts and run, the system has reset.

How to reset PassLock reset system on Chevy?

How long does it take to turn off a GM security light?

Leave the key in the “ON” position for approximately 11 minutes. The security light will be steady on or flashing for the 11-minute period. Do not proceed to Step 2 until the security light turns off or stops flashing. 2. Turn the ignition switch to the “OFF” position for 30 seconds. 3.

When does the security indicator light turn off?

Observe the “SECURITY” indicator After 10 minutes the “SECURITY” indicator light will turn off. Observe the “SECURITY” indicator After 10 minutes the “SECURITY” indicator light will turn off. Observe the “SECURITY” indicator After 10 minutes the “SECURITY” indicator light will turn off. Vehicle has now learned the new password. Start the

How long does it take to relearn the ignition switch?

When performing this relearn, all previously learned keys will be erased. Additional keys may be relearned immediately after the first key has been learned by inserting the additional key and turning the ignition switch to on within 10 seconds of removing the previously learned key. Turn key to the “ON” position without starting the engine.

How long do you leave ignition key on while programming?

Connect a battery charger to the battery to ensure power is available while programming. Both the BCM and PCM must be working and communicating with each other. Insert ignition key and turn to the “ON” position. Do not attempt to start the engine. Leave the key in the “ON” position for approximately 11 minutes.

When does the anti theft system car wont start?

If the engine does not respond or dies immediately after cranking up, leave the key in that position for 10 minutes. When the security light goes off, turn the ignition off, wait 20 seconds, and then start the engine. These are the most popular ways to solve the problem of anti theft system car wont start.

Why does my security light keep tripping?

For instance, a tree close by that didn’t affect the security light last year would have grown since and extended its branches now causing the wind to rustle through the leaves, constantly moving them in front of the sensor and tripping it. So check for anything that could be constantly moving in the area of detection.

What should I do if my Toyota Corolla security light goes off?

The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine. If it starts and runs, everything is okay. If you get the same result as previously—nothing happens or the engine starts and dies with the security light flashing—wait ten more minutes.

What happens if a car security light is blinking?

If the security light is blinking the immobilizer system is enabled and will not allow the car to start. What Goes Wrong? Most cars today have a security system built into the electrical system (BCM – Body control module) to deter from theft. The problem is it can sometimes stop the person that owns the car from starting the engine as well.